Smeg CS19-6 [6/32] Instructions for the installer

Instructions for the installer

3. ADAPTATION TO DIFFERENT TYPES OF GAS

Before carrying out the following operations, disconnect the appliance

from the electricity supply

The cooker hob is preset for natural gas G20 (2H) at a pressure of 20

mbar. In the case of functioning with other types of gas the burner

nozzles must be changed and the minimum flame adjusted on the gas

taps. To change the nozzles, proceed as described below.

3.1 Replacement of nozzles on the hob

This operation requires no primary air regulation.

1. Extract the pan stands and remove all the caps and flame-spreader

crowns;

2. Unscrew the burner nozzles with a 7 mm socket wrench;

3. Replace the nozzles according to the type of gas to be used and the

description in paragraph “3.2 Burner and nozzle characteristics

table”.

Replace the burners in the correct position.