Kramer VP-211K [9/15] Connecting the vp 211k

VP-211K - Connecting the VP-211K

4 Connecting the VP-211K

Always switch off the power to each device before connecting it to your

VP-211K. After connecting your VP-211K, connect its power and then

switch on the power to each device.

To connect the VP-211K as illustrated in the example in Figure 2:

1. Connect a UXGA/audio source (for example, a PC graphics card) to the

UXGA IN 1 15-pin HD connector and to the AUDIO IN 1 mini plug connector.

2. Set the DEFAULT INPUT switch to IN 1 (the factory preset default), as

described in Section 4.2

3. Connect a UXGA/audio source (for example, a PC graphics card) to the

UXGA IN 2 15-pin HD connector and to the AUDIO IN 2 mini plug connector.

4. Connect the UXGA OUT 15-pin HD connector and the AUDIO OUT mini

plug connector to the acceptor (for example, a display with speakers).

5. If required, connect an additional display to the UXGA LOOP OUT 15-pin HD

connector.

6. Connect the 5V DC power adapter to the power socket and connect the

adapter to the mains electricity.