Kramer VS-211HA [10/15] Connecting the remote terminal block connector

VS-211HA - Connecting the VS-211HA

Figure 2: VS-211HA Connections

4.1 Connecting the REMOTE Terminal Block Connector

If DIP 1 is set ON to manual you can switch the active input by using contact

closure switches. To do this, connect the appropriate REMOTE input terminal

block connector pins to a contact closure switch (see Figure 3).

 To select IN 1: Momentarily connect REMOTE IN1 to PIN G (ground)

 To select IN 2: Momentarily connect REMOTE IN2 to PIN G (ground)

Do not connect both the REMOTE IN1 and the REMOTE IN2

to PIN G simultaneously

Momentarily

connect pin IN1 to

pin G to activate

INPUT 1

Momentarily

connect pin IN2 to

pin G to activate

INPUT 2

Figure 3: REMOTE Terminal Block Connector