Kramer VS-211HA [12/15] Using the override mode

VS-211HA - Operating the VS-211HA

To set Automatic/Priority mode:

 Slide AUTO/MANUAL DIP 1 up to AUTO and LAST/PRIORITY DIP 2 down

to PRIORITY

In Automatic/Last mode, the last connected input is sent to the output

 If Inputs 1 and 2 are active when the VS-211HA is powered on, Input 1 is

sent to the output (as the priority input)

 If Input 2 is disconnected, Input 1 is still sent to the output

 If Input 2 is reconnected, Input 2 is sent to the output

For example, a salesman connected to Input 1 displays a presentation on the AV system

of a boardroom. A second salesman arrives, connects to Input 2 and continues with

his/her presentation.

To set Automatic/Last Connected mode:

 Slide AUTO/MANUAL DIP 1 up to AUTO and LAST/PRIORITY DIP 2 up to

LAST

5.3 Using the Override Mode

Override mode is used while the VS-211HA is in either Priority or Last connected

automatic mode. Pressing either of the contact closure switches:

 Forces the chosen input, if it is active, to be sent to the output

 If the forced signal is inactive for 10 seconds, the VS-211HA returns to auto

mode

 If the forced signal is lost, the VS-211HA reverts to its selected mode

For example, a sales manager, connected to Input 1, displays a presentation on the AV

system of a boardroom. A salesman arrives and wants to connect to Input 2 without

interrupting the manager. They press the Input 1 contact closure switch to allow Input 2 to

connect without interrupting Input 1.