Smeg A1C-6 [10/26] Programming

Instructions for the user

3.2.3 Programming

Cooking duration: the 2nd button

can be pressed to set the cooking

duration. Before it can be set, the thermostat must be turned to the

desired cooking temperature and the function selector knob to any

setting. To set the cooking duration, proceed as follows:

- Press key ; the pointer will go to position 12

and the adjacent symbol will flash (Fig. 1).

- Within 5 seconds press key

or to set the

cooking duration: each pressure on the

key

adds 1 minute to the cooking duration, and every

12 minutes a new inside segment will light up

(figure 2 shows a cooking duration of 1 hour).

- Once the desired duration is obtained, cooking

will start about 5 seconds after the last pressure

or .

- The display will show the current time,

represented by the constantly illuminated

segments, and the minutes left to the end of the

cooking time, represented by the flashing

segments (each flashing segment means 12

minutes of cooking time left).

- At the end of the cooking time the timer will

switch the oven heating elements off, the beeps

will start to sound and the numbers on the dial

will flash.

- The duration can also be reset by deleting the

program selected: Press the central key

for 2

seconds to cancel the set duration and the oven

will have to be manually switched off.

Warning: it is not possible to set cooking durations of more than 12

hours.