Kramer TP-121xl [13/17] Operating the tp 121xl and tp 122xl

TP-121xl/TP-122xl - Operating the TP-121xl and TP-122xl

6 Operating the TP-121xl and TP-122xl

6.1 Capturing the EDID

The TP-121xl is programmed with a default EDID. The default EDID can be

replaced with the EDID from a display device.

To capture a new EDID:

 With the display device connected to the TP-121xl, press the EDID Capture

button on the front panel.

If the EDID is successfully captured the Status LED flashes slowly for a few

seconds and then lights solid. If the EDID is not successfully captured the

Status LED flashes quickly for a few seconds then lights solid when the

default EDID is loaded.

6.2 Adjusting the Level and Equalization on the TP-122xl

To achieve optimum picture quality, you can manually adjust the signal level and

equalization using the trimmers on the front of the TP-122xl.

To adjust the level and equalization on the TP-122xl:

1. Use a small screwdriver to slowly turn the Level trimmer clockwise to

increase or anticlockwise to reduce the signal level of the TP-122xl.

2. Use a small screwdriver to slowly turn the EQ trimmer clockwise or

anticlockwise until you achieve an optimum picture.