Smeg PDXF116RS [12/18] Securing the appliance to the cabinet

Instructions for the Installer

8.2 Securing the appliance to the cabinet

8.2.1 Securing the side brackets

Fit the two provided brackets to the short sides of the appliance as shown

in figura 4-5

4) 5)

8.2.2 Securing the front/rear brackets

The hob is equipped with 10 brackets "A" (see fig. 6) which secure and

level it relative to the cabinet top. Depending on whether the hob is to be

installed to a cabinet of 20mm to 30mm thickness (Detail "C") or 30mm to

50mm thickness (Detail "B"), the brackets "A" mount to different holes in

the hob's casing (see fig. 7).

6) 7)

Important:

• When fixing this product to the supporting structure, do not use

mechanical or electric screwdrivers and apply only moderate pressure

to the fixing components by hand.

• When fixing the product, always use the brackets provided in all fixing

points.

• If this product is installed above an oven, the oven must be fitted with a

cooling fan.

• Apply a coat of proofing primer to the cut surface of the top