![Kramer TBUS-5xl [11/20] Installing the tbus 5xl](/img/pdf.png)
Kramer TBUS-5xl [11/20] Installing the tbus 5xl
![Kramer TBUS-5xl [11/20] Installing the tbus 5xl](/views2/1153626/page11/bgb.png)
8 TBUS-5xl - Installing the TBUS-5xl
5 Installing the TBUS-5xl
To install the TBUS-5xl perform the following steps:
1. Assemble the inner frame (see
Section 5.1
2. Install the inner frame (see
).
Section 5.2
3. Cut an opening in the table (see
).
Section 5.3
4. Insert the unit through the opening and secure to the table (see
).
Section 5.4
5. Connect the cables (see
).
Section 5.5
6. Insert the pass-through cables (see
).
Section 5.6
7. Adjust the height of the inner frame (see
).
Section 5.7
5.1 Assembling the Inner Frame
).
The modules mounted on the inner frame can include single inserts and/or dual
inserts as well as a power socket (in some models). This section describes how to
assemble these modules.
i
Each module kit comes with detailed assembly instructions.
Содержание
- User manual 1
- Contents 3
- Figures 3
- Introduction 4
- Achieving the best performance 5
- Getting started 5
- Glossary 5
- Overview 6
- Your tbus 5xl enclosure 7
- Tbus 5xl accessories 8
- Tbus 5xl optional inner frames 8
- Tbus 5xl optional inserts 8
- A choice of power sockets per inner frame are available in several versions 9
- Available see the compatibility restrictions in the table below 9
- Including power sockets for the usa germany the europlug belgium france 9
- Italy south africa israel and australia a universal socket for general use is also 9
- Power socket options 9
- Power socket type 9
- Power specs 9
- Power specs power socket type 9
- Power cord options 10
- You can order any of the following power cords to use with a modular tbus 10
- Assembling the inner frame 11
- Installing the tbus 5xl 11
- A v type signals 12
- Appropriate place and tighten with the two screws supplied 12
- Fix the kramer insert in place and tighten them 12
- Mounting the inserts 12
- Mounting the power socket assemblies 12
- Place the required kramer insert over the opening insert the two screws to 12
- Power socket kits come with assembly instructions 12
- Remove the blank plate 12
- Replace them with kramer passive wall plates or connector modules for interfacing 12
- To mount a kramer insert or connector module 12
- To mount the power socket place the power socket under the frame in its 12
- Unscrew the two screws that fasten the blank plate to the inner frame and 12
- You can rearrange or remove any of the plates mounted on the inner frame and 12
- Cutting an opening in the table 13
- Installing the inner frame 13
- Inserting the tbus 5xl t hrough the cut out opening 14
- Inserting the tbus 5xl through the cut out opening 14
- Connecting the cables 15
- Inserting the pass through cables 15
- Adjusting the height of the inner frame 16
- Using the tbus 5xl 17
- Technical specifications of the assembled tbus 5xl 18
Похожие устройства
- Kramer TBUS-6xl Руководства по эксплуатации
- Kramer TBUS-10xl Руководства по эксплуатации
- Kramer UTBUS-1xl Руководства по эксплуатации
- Kramer T1AF Руководства по эксплуатации
- Kramer T3F Руководства по эксплуатации
- Kramer T-2INSERT Руководства по эксплуатации
- Kramer T4F Руководства по эксплуатации
- Speedlink SL-6693 Инструкция по эксплуатации
- Speedlink SL-6631 Инструкция по эксплуатации
- Stm NT5FA Инструкция по эксплуатации
- Stm NT1 Инструкция по эксплуатации
- Stm Cooling IP14 Инструкция по эксплуатации
- Stm Cooling IP5 Silver Инструкция по эксплуатации
- Stm Cooling IP9 Инструкция по эксплуатации
- Kramer T5F Руководства по эксплуатации
- Kramer T6F Руководства по эксплуатации
- Kramer T10F Руководства по эксплуатации
- Kramer WP-110 Руководства по эксплуатации
- Kramer WP-110xl Руководства по эксплуатации
- Kramer WP-120 Руководства по эксплуатации