Kramer Yarden6-ID [10/18] Installing the yarden 6 id

Yarden 6-ID - Installing the Yarden 6-ID

4 Installing the Yarden 6-ID

This section explains how to:

 Choose the best location for your speakers (see Section 4.1)

 Cut the wall (see Section 4.2)

 Install the speaker wires (see Section 4.3)

 Mount onto the wall (see Section 4.4)

 Setup an array installation (see Section 4.5)

4.1 Choosing the Best Location

Before installing the speaker make sure that:

 The desired location is free of obstructions, such as electrical piping, AC

ducts or water lines, and so on

 There is enough space behind the mounting surface for the speakers

 The rear side of the speaker is not blocked by wall studs or other objects

4.2 Cutting the Wall

To cut the wall, do the following:

1. Mark the location of the opening, using the template measurements.

2. Cut out the opening according to the template.

Initially, you can cut a smaller area inside the marked area just to be sure that the

space behind the speakers is clear