Kramer Yarden6-ID [13/18] Mount onto the wall

Yarden 6-ID - Installing the Yarden 6-ID

4.4 Mount onto the Wall

To mount the speaker to the wall:

1. Insert the speaker into the opening in the wall.

2. Tighten the mounting tabs (6) by turning the screws counter clockwise (see

Figure 5).

Turning one quarter of a circle rotates the tab outwards; after that the screw is turned to

tighten the tabs to the rear side of the wall surface

When tightening the mounting tabs, the tabs automatically turn outward, thus

clamping the speaker to the wall from its rear side.

Do not over-tighten the screws. It may cause damage to both the

speakers and the surface.

Figure 5: Tighten the Mounting Tabs

4.5 Setting up an Array Installation

When installing Yarden 6-ID in an array installation layout, you have to define the

distance between speakers as well as the layout pattern (square or hexagonal).

The distance between speakers is set according to the uniformity of the coverage

desired and the budget.

The coverage angle of the speaker determines the coverage area and the number

of speakers required in the array installation. Two patterns are usually used for

array installations, square (see Figure 6) or hexagonal (see Figure 7), depending

on the shape of the installation area. The speakers are positioned according to

their coverage area.