Legrand Niky S 1500 [14/56] Introduction

Legrand Niky S 1000 [14/56] Introduction
14
®
1 Introduction
This manual contains information for users of the Niky S 1-1.5-2-3 kVA models.
You are advised to read this handbook carefully before installing your uninterruptible power sup-
ply, meticulously following the instructions given herein.
The UPS Niky S is only been made for civil or industrial use; it is not in conformity with the stan-
dards for electro-medical equipment.
The UPS Niky S has been designed to supply data processing equipment. The load applied must
not exceed the one indicated on the rear label of your UPS.
The ON/OFF button of your UPS does not electrically isolate the internal parts. To isolate your
UPS unplug it from the mains power socket.
Do not open the UPS container since there may be parts inside with dangerously high voltage
even when the mains plug is disconnected; there are no parts inside that the user can repair.
The UPS Niky S has been designed to work in closed, clean rooms where there are no inflamma-
ble liquids or corrosive substances and where it is not too damp.
Do not place near equipments that generate strong electro-magnetic fields and/or near equi-
pments that are sensible to electro-magnetic fields. (engines, floppy disks, speakers, adapters,
monitors, video, etc...)
Do not pour any liquid on the UPS or inside the UPS.
Do not place the UPS in humid environment or near liquid, such as water, chemical solution
Do not expose the UPS to the direct sunlight or any heat sorces.
Keep the ventilation slits clean to dissipate the heat of the UPS.
Use grounded power cable to connect the UPS to the mains supply.
Do not plug laser printers into the UPS because of their high start-up current.
Do not plug house electric equipments, such as hair dryer,air conditioner, and refrigerator into
the UPS outlets.
2 Conditions of use
®

Содержание

Похожие устройства

Скачать