Kuppersberg fa6if01 [32/64] Troubleshooting

TROUBLESHOOTING

The hob or the cooking zone doesn’t start-up :

• The hob is badly connected on the electrical network.

• The protection fuse cut-off.

• The locking function is activated.

• The sensitive keys are covered with grease or water.

• An object is put on a key.

The control panel displays [ U ] :

• There is no pan on the cooking zone.

• The pan is not compatible with induction.

• The bottom diameter of the pan is too small.

Continuous ventilation after cutting off the hob :

• This is not a failure, the fan continuous to protect the electronic device.

• The fan cooling stops automatically.

One or all cooking zone cut-off :

• The safety system functioned.

• You forgot to cut-off the cooking zone for a long time.

• One or more sensitive keys are covered.

• The pan is empty and its bottom overheated.

• The hob also has an automatic reduction of power level and breaking Automatic

overheating

The control panel displays [ L ] :

• Refer to the chapter control panel locking page.

The control panel displays [ Er03 ] :

• An object or liquid covers the control keys. The symbol disappear as soon as the key is

released or cleaned.

The control panel displays [ E2 ] or [ EH ] :

• The hob is overheated, let it cool and then turn it on again.

The control panel displays [ E3 ] :

• The pan is not adapted, change the pan.

The control panel displays [ E5 ] :

• Defective network. Control the voltage of the electrical network.

The control panel displays [ E6 ] :

• Defective network. Control the frequency of the electrical network.

The control panel displays [ E8 ] :

• The air inlet of the ventilator is obstructed, release it.

The control panel displays [ U400 ] :

• The hob is not connected to the network. Check the connection and reconnect the hob.

If one of the symbols above persists, call the SAV.