Kaiser EHC 69000 NR [6/88] Electrical connection

INSTALLATION INSTRUCTIONS

These Instructions are for the qualified technician,

as a guide to the installation, adjustment and

maintenance, according to the laws and standards

in force.

Any of these operations must always be carried

out when the appliance has been disconnected

from the electric system.

ELECTRICAL CONNECTION

Before connecting the oven or built-in cooker to

the mains power supply, make sure that:

x The supply voltage corresponds to the

specifications on the data plate on the front

of the stove or at the bottom of the hob.

x The mains supply has an efficient

grounding in compliance with all applicable

laws and regulations.

Correct grounding is a legal requirement. If the

appliance is not pre-fitted with a power cable

and/or plug, use only suitable cables and plugs

capable of handling the power specified on the

appliance's data plate and capable of resisting

heat. The power cable should never reach the

temperature 50°C at any point along its length.

If the appliance is to be connected directly to

mains terminals, fit a switch with minimum

aperture of 3 mm between the contacts. Make sure

that the switch is of sufficient capacity for the

power specified on the appliance's data plate, and

compliant with applicable regulations. The switch

must not break the yellow-green earth wire. The

outlet or switch must be easily accessible.

Attention! The manufacturer declines all

responsibility for damage or injury if the

above instructions and safety precautions

are not respected.