![Makita 4328 [8/32] Specific safety rules](/img/pdf.png)
Makita 4328 [8/32] Specific safety rules
8
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of an GFCI
reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
11. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
14. Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
16. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
18. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
19. Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
20. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
21. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardous situation.
SERVICE
24. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
25. Follow instruction for lubricating and changing
accessories.
26. Keep handles dry, clean and free from oil and
grease.
SPECIFIC SAFETY RULES
GEB016-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
ence to jig saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord.
Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock the
operator.
2. Use clamps or another practical way to
secure and support the workpiece to a stable
platform.
Holding the work by hand or against your
body leaves it unstable and may lead to loss of con-
trol.
3. Always use safety glasses or goggles. Ordi-
nary eye or sun glasses are NOT safety
glasses.
4. Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the
workpiece before cutting so that the blade
will not strike the floor, workbench, etc.
7. Hold the tool firmly.
8. Make sure the blade is not contacting the
workpiece before the switch is turned on.
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate the
tool only when hand-held.
11. Always switch off and wait for the blade to
come to a complete stop before removing the
blade from the workpiece.
12. Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
13. Do not operate the tool at no-load unneces-
sarily.
Содержание
- Symbole 6
- Symbols 6
- Символы 6
- English 7
- Explanation of general view 7
- General power tool safety warnings 7
- Save all warnings and instructions for future reference 7
- Specification 7
- Always use safety glasses or goggles ordi nary eye or sun glasses are not safety glasses 4 avoid cutting nails inspect workpiece for any nails and remove them before operation 5 do not cut oversize workpiece 6 check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor workbench etc 7 hold the tool firmly 8 make sure the blade is not contacting the workpiece before the switch is turned on 9 keep hands away from moving parts 10 do not leave the tool running operate the tool only when hand held 11 always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece 12 do not touch the blade or the workpiece immediately after operation they may be extremely hot and could burn your skin 13 do not operate the tool at no load unneces sarily 8
- Do not let comfort or familiarity with product gained from repeated use replace strict adher ence to jig saw safety rules if you use this tool unsafely or incorrectly you can suffer serious personal injury 1 hold power tools by insulated gripping sur faces when performing an operation where the cutting tool may contact hidden wiring or its own cord 8
- Specific safety rules 8
- Use clamps or another practical way to secure and support the workpiece to a stable platform 8
- Assembly 9
- Functional description 9
- Installing or removing saw blade fig 4 5 9
- Save these instructions 9
- Selecting the cutting action for models 4328 4329 fig 1 9
- Some material contains chemicals which may be toxic take caution to prevent dust inhala tion and skin contact follow material sup plier safety data 15 always use the correct dust mask respirator for the material and application you are work ing with 9
- Speed adjusting dial for models 4327 4328 4329 fig 3 9
- Switch action fig 2 9
- Warning misuse or failure to follow the safety rules stated in this instruction manual may cause serious personal injury 9
- Adjusting roller for models 4326 4327 fig 7 10
- Bevel cutting 10
- Cutouts 10
- Dust cover fig 8 10
- Dust extraction fig 17 10
- Finishing edges fig 16 10
- Front flush cuts fig 13 10
- Hex wrench storage fig 6 10
- Metal cutting 10
- Operation 10
- Rip fence optional accessory 10
- Straight cuts fig 18 19 20 21 10
- Accessories 11
- Anti splintering device for aluminum base optional accessory fig 27 11
- Anti splintering device for steel base optional accessory fig 26 11
- Circular cuts fig 22 23 24 25 11
- Cover plate for aluminum base optional accessory fig 28 11
- For european countries only 11
- Maintenance 11
- 4328 4329 12
- Ce 2007 12
- Ec declaration of conformity 12
- Allgemeine sicherheitswarnungen für elektrowerkzeuge 13
- Bewahren sie alle warnungen und anweisungen für spätere bezugnahme auf 13
- Deutsch 13
- Technische daten 13
- Übersicht 13
- Bewahren sie diese hinweise sorgfältig auf 15
- Funktionsbeschreibung 15
- Spezielle sicherheitsregeln 15
- Wahl der schnittbewegung für modelle 4328 4329 abb 1 15
- Betrieb 16
- Einstellen der führungsrolle für modelle 4326 4327 abb 7 16
- Gehrungsschnitte 16
- Hubzahl stellrad für modelle 4327 4328 4329 abb 3 16
- Inbusschlüssel aufbewahrung abb 6 16
- Montage 16
- Montage demontage des sägeblatts abb 4 u 5 16
- Schalterfunktion abb 2 16
- Schutzhaube abb 8 16
- Abdeckplatte für aluminium grundplatte sonderzubehör abb 28 17
- Ausschnitte 17
- Bearbeitung von kanten abb 16 17
- Parallelanschlag sonderzubehör 17
- Randnahe schnitte abb 13 17
- Schneiden von metall 17
- Splitterschutz für aluminium grundplatte sonderzubehör abb 27 17
- Splitterschutz für stahl grundplatte sonderzubehör abb 26 17
- Staubabsaugung abb 17 17
- Ce 2007 18
- Ce konformitätserklärung 18
- Nur für europäische länder 18
- Wartung 18
- Zubehör 18
- Dane techniczne 19
- Ogólne ostrzeżenia dotyczące bezpieczeństwa dla urządzenia zasilanego prądem 19
- Polski 19
- Wyjaśnienia dotyczące urządzenia i jego użycia 19
- Zachowaj wszystkie ostrzeżenia i instrukcje do wykorzystania w przyszłości 19
- Działanie włącznika rys 2 21
- Opis działania 21
- Szczegółowe zasady bezpieczeństwa 21
- Wybór sposobu cięcia dla modeli 4328 4329 rys 1 21
- Zachowaj tę instrukcję 21
- Zawsze używaj maski przeciwpyłowej respiratora właściwego dla obrabianego materiału i wykonywanej pracy 21
- Cięcie ukośne 22
- Pokrywa przeciwpyłowa rys 8 22
- Pokrętło regulacji prędkości dla modeli 4327 4328 4329 rys 3 22
- Postępowanie 22
- Przechowywanie klucza sześciokątnego rys 6 22
- Regulacja wałka dla modeli 4326 4327 rys 7 22
- Składanie 22
- Zakładanie lub wyjmowanie brzeszczotu rys 4 i 5 22
- Cięcie metalu 23
- Prowadnica wyposażenie dodatkowe 23
- Płyta ochronna dla aluminiowej podstawy wyposażenie dodatkowe rys 28 23
- Urządzenie antyodpryskowe dla aluminiowej podstawy wyposażenie dodatkowe rys 27 23
- Urządzenie antyodpryskowe dla stalowej podstawy wyposażenie dodatkowe rys 26 23
- Wyciąganie pyłu rys 17 23
- Wycięcia 23
- Wykańczanie brzegów rys 6 23
- Ce 2007 24
- Drgania 24
- Konserwacja 24
- Model 4326 4327 24
- Model 4328 4329 24
- Szummy 24
- Tylko dla krajów europejskich 24
- Ue deklaracja zgodności 24
- Wyposażenie 24
- Инструмент должен быть подсоединен только к источнику питания с напряжением указанным в табличке номиналов и может функционировать только от однофазного источника питания переменного тока в соответствии с европейским стандартом имеется двойная изоляция следовательно возможно использование с розетками без провода заземления 25
- Общие предупреждения относительно безопасности электрического инструмента 25
- Русский язык 25
- Сохраните все предупреждения и инструкции для дальнейшего использования 25
- Технические характеристики 25
- Особые правила безопасности 27
- Сохраните эти инструкции 27
- Выбор режима резки для моделей 4328 4329 рис 1 28
- Действия при переключении рис 2 28
- Описание функционирования 28
- Регулятор переключения скорости для моделей 4327 4328 4329 рис 3 28
- Сборка 28
- Установка или удаление лезвия пилы рис 4 и 5 28
- Вырезание 29
- Наклонная резка 29
- Отделка краев рис 16 29
- Передние разрезы вровень рис 13 29
- Пылезащитный чехол рис 8 29
- Регулирующий ролик для моделей 4326 4327 рис 7 29
- Резка металла 29
- Хранение торцевого гаечного ключа рис 6 29
- Эксплуатация 29
- Ехническое обслуживание 30
- Направляющая планка дополнительная принадлежность 30
- Принадлежности 30
- Противорасщепляющее устройство для алюминиевого основания дополнительная принадлежность рис 27 30
- Противорасщепляющее устройство для стального основания дополнительная принадлежность рис 26 30
- Стыковочная накладка для алюминиевого основания дополнительная принадлежность рис 28 30
- Удаление пыли рис 17 30
- Ce 2007 31
- Ес декларация соответствия 31
Похожие устройства
- Makita 4329k Инструкция по эксплуатации
- Makita 5603r Инструкция по эксплуатации
- Makita 5903r Инструкция по эксплуатации
- Makita elm3800 Инструкция по эксплуатации
- Makita 5903rk Инструкция по эксплуатации
- Makita 6261dwple Инструкция по эксплуатации
- Makita 6317dwae Инструкция по эксплуатации
- Makita 6317dwde Инструкция по эксплуатации
- Makita 6347dwde Инструкция по эксплуатации
- Makita 6501 Инструкция по эксплуатации
- Makita 9237cb Инструкция по эксплуатации
- Makita 9069f Инструкция по эксплуатации
- Makita 9558hnk Инструкция по эксплуатации
- Makita 9741 Инструкция по эксплуатации
- Makita bo5031 Инструкция по эксплуатации
- Makita 9562ch Инструкция по эксплуатации
- Motorola FX7500 Инструкция по эксплуатации
- Motorola FX7400 Инструкция по эксплуатации
- Makita ga9030sf01 Инструкция по эксплуатации
- Makita ga9040sf01 Инструкция по эксплуатации
Скачать
Случайные обсуждения