Tp-Link TD-W8101G Инструкция по эксплуатации онлайн [70/94] 16739

Tp-Link TD-W8101G Инструкция по эксплуатации онлайн [70/94] 16739
TD-W8101G
54Mbps Wireless ADSL2+ Modem Router User Guide
Note:
If select PVC0~PVC7 as an interface, the filter will match the IP traffic of WAN port with specified
IPs (Source IP Address and Destination IP Address). If select LAN as an interface, the filter will
match the IP traffic of LAN port with specified IPs.
Примечание:
Если вы в качестве интерфейса выберите постоянные виртуальные каналы PVC0~PVC7,
фильтр будет применяться к IP-трафику порта WAN с указанными IP (IP-адрес источника и
IP-адрес назначения). Если вы в качестве интерфейса выберите локальную сеть, тогда
фильтр будет применяться к IP-трафику порта LAN с указанными IP.
Direction: Select the direction for this IP Filter rule. There are three filtering directions: Both,
Incoming, Outgoing.
Direction (Направление): Выберите направления для данного правила фильтра по IP.
Имеется три направления фильтрации: оба, входящий, исходящий.
Note:
Incoming means that IP traffic which is coming into the Router, and the Outgoing means that IP
traffic which is going out the Router.
Примечание:
Входящий означает IP-трафик, входящий на маршрутизатор, исходящий означает трафик,
исходящий с маршрутизатора.
IP/MAC Filter Rule Index: Select the Rule index for the IP Filter entry.
IP/MAC Filter Rule Index (Индекс правила фильтра по IP/MAC-адресу): Выберите
индекс правила для записи фильтра по IP.
Note:
You should set the IP/MAC Filter Set Index and IP/MAC Filter Rule Index together to appoint
the address (shown in the Filter List) for the IP Filter rule. For example, (1, 2), it means the rule
will be shown in the row 2 IP/MAC Filter Set Index 1.
Примечание:
Вам следует указать IP/MAC Filter Set Index (указанный индекс фильтра по IP/MAC-
адресу) и IP/MAC Filter Rule Index (индекс правила фильтра по IP/MAC-адресу) вместе
для того, чтобы назначить адрес (находящийся в списке фильтра) для правила фильтра
по IP. Например, (1,2), это означает, что правило будет показано во 2 ряду для того, чтобы
совпадать с 1.
Rule Type: For IP Filter, please select IP here.
Active: Select “Yes” to make the rule to take effect.
Source IP Address: Enter the source IP address for the rule. You can enter 0.0.0.0; it
means that all IP addresses are controlled by the rule.
Destination IP Address: Enter the destination IP address for the rule. You can enter
0.0.0.0, it means that all IP addresses are controlled by the rule. The set of Subnet Mask and
Port Number are same as Source IP Address.
59

Содержание