Smeg WMF147X [18/22] Cleaning and maintenance

5. CLEANING AND MAINTENANCE

Important – Before carrying out any cleaning or maintenance procedure, the plug must be disconnected

from the power supply socket.

5.1 CLEANING THE OUTSIDE OF THE APPLIANCE

• Regular, thorough cleaning will keep your appliance looking good.

• Clean the exterior of the appliance with soap and water only, then dry thoroughly with a soft cloth.

• The plastic parts should just be wiped with a damp cloth.

• Do not scrape with pointed objects, or use solvents or products containing abrasive substances because

they damage the surfaces.

• For reasons of safety, never spray the washing machine with jets of water.

5.2 CLEANING THE DRUM

• Remove any rust marks from the drum using a stainless steel cleaner, or very fine sandpaper for particu-

larly stubborn cases.

• For descaling the washing machine use only brand-name descalers which contain an anti-corrosion a-

gent for washing machines.

• Always follow the producer's instructions with regard to use and dosages.

• After descaling or removing rust from the drum, carry out a few rinse cycles to remove all acid

residues which might damage the appliance. Never use cleaners which contain solvents. There is

the risk of the formation of vapours which might catch fire and explode.

5.3 CLEANING THE DOOR GASKET

Check regularly that there are no paper clips, buttons, nails or pins in the folds of the door gasket.

5.4 CLEANING THE DRAIN PUMP

Only clean the drain pump if it is obstructed by buttons, hairpins and the like and the water cannot drain.

In this case, proceed as follows.

1. Remove the plug from the socket to disconnect the machine from the electrical power supply.

2. Pull out the base plate. To do this, put your hands

underneath and lever it out.