Karcher BRS 43/500C *EU [15/216] Troubleshooting

Karcher BRS 43/500C *EU [15/216] Troubleshooting
- 5
Î Remove the waste container and clean
it.
Î Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
Î Check the brushes for wear, replace if
required.
The brushes are considered worn, if the
bristles have the same length as the
yellow indicator bristles.
Î Check appliance for damage, have
damages repaired by customer service.
Î Check spray pattern of the nozzle.
Clean or replace the nozzles as need-
ed.
Î Have the prescribed inspection carried
out by the customer service.
Î Place the slider vertically and arrest.
Î Tilt the appliance backward and store it
on the pushing handle.
Î Press the brush change key toward the
outside and simultaneously tilt the
brush roller out.
Î Pull out the brush roller.
Î Place the new brush roller on the driver
and lock into place.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
Danger
Risk of injury!
Pull the plug from the mains before carrying
out any tasks on the appliance.
Caution
Risk of damage to the appliance on ac-
count of water leakage. Remove the deter-
gent tank before doing any work on the
appliance.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
Weekly
Yearly
Maintenance Works
Replacing the brush rollers
Maintenance contract
Troubleshooting
Faults
Fault Remedy
Appliance cannot be started Check if the mains plug is connected.
Reset the overoad fuse by pressing it in.
Check the brushes for blockage due to foreign particles,
remove them if found.
Too little or no detergent appli-
cation
Clean sieve.
Remove the nozzle, rinse under running water and rein-
sert it.
Replace the nozzle.
Check the correct positioning of the coupling in the de-
tergent hose.
Insufficient cleaning result Check the brushes for wear, replace if required.
Check the detergent dosing.
Appliance vibrates. Check if brushes are fitted properly.
Transpose the brush rollers.
Submerge the brush rollers in hot water (approx. 80°C)
for about 15 minutes
15EN

Содержание

Похожие устройства

Скачать