D-Link DFL-100 Инструкция по эксплуатации онлайн [11/97] 17499

11
Point-to-Point Protocol over Ethernet (PPPoE) this protocol requires the
use of a Username and Password to gain access to the network. In addition,
you can specify a Connect on Demand connection that will connect to the
Internet only when a computer or device on your LAN makes a request.
If you do not know the appropriate method of obtaining the WAN side
network address information, contact your ISP or network administrator.
The Device IP Settings dialog box allows you to specify the IP address that
computers on your LAN will use to access the DFL-100s web-based
configuration utility. The default is 192.168.0.1 with a subnet mask of
255.255.255.0. If it becomes necessary to change this IP address, be sure to
use an address that is in the same range (on the same subnet) as the three
LAN ports, or you will not be able to access the DFL-100 from your LAN.
The many other features of the DFL-100 are describe in subsequent sections.
Скачать
Случайные обсуждения

Ответы 1

Как отключить NAT на D-link DFL-100&
12 лет назад