D-Link DFL-100 Инструкция по эксплуатации онлайн [26/97] 17499

DFL-100’s DHCP server to give IP addresses from the new IP address range

that you will give the DFL-100 here.

As an example, if your LAN network is to be a 10.x.x.x network with a

subnet mask of 255.0.0.0, you might assign the DFL-100 an IP address of

10.0.0.1 and configure the DFL-100’s DHCP server to assign addresses in the

range between 10.0.0.2 to 10.0.0.100. Saving all of this information to the

DFL-100’s non-volatile RAM and restarting the router will make this IP

addressing scheme current. When you restart the computers connected to the

LAN side of the DFL-100, they will automatically be assigned IP addresses

from the proper range.

As an alternative, you could manually update the IP address and subnet mask

for each computer on the LAN side of the DFL-100.

It is recommended that if you need to change the IP addressing scheme for

the DFL-100, that you configure the DFL-100’s DHCP server with the

appropriate IP address range and subnet mask first, and then assign an IP

address from the same range to the DFL-100. That way, a computer on the

LAN side of your network can always get the proper network addressing

information by DHCP from the DFL-100 simply by being restarted.