D-Link DFL-100 Инструкция по эксплуатации онлайн [28/97] 17499

for the DFL-100 to assign. In this case, the IP

address of the DFL-100 is 192.168.0.1, so the

first IP address in the range is 192.168.0.2. IP

addresses can range from 0.0.0.0 to

255.255.255.255.

Ending IP Address

This is the last IP address in a range that the

DFL-100 will assign to a computer on your

network. In this case, the range of IP addresses

between 192.168.0.2 to 192.168.0.100 gives 99

different IP addresses that the DFL-100 can

assign to the computers on your network.

Lease Time

This is the length of time any computer on you

network that is assigned network settings by the

DFL-100 − through the DHCP protocol − can

keep its network settings. If the lease expires

while a computer is logged on to your network,

that computer will request a new set of network

settings. The default is 10080 minutes.

Auto Configuration

This field allows you to specify whether or not

the DFL-100 will assign the following network

settings to the computers on your network. If

you choose to Enable Auto Configuration, the

following network settings will be obtained from

your ISP by the DFL-100, and then assigned to

computers on your network. If you choose to

Disable Auto Configuration, the network

settings you enter in the fields below will be

assigned to computers on your network.

Domain Name Suffix

The DFL-100 can provide a domain name suffix

to computers on your network. This domain

name suffix can be provided automatically by

your ISP, or you can enter it statically here. This

suffix will then be automatically added to URL

requests for access to your ISP’s servers.

Default Gateway

This is the IP address of a device at your ISP’s

office where packets destined for the Internet −

from your home network − are sent, before being

rwarded to their final destination. For the