D-Link DFL-100 Инструкция по эксплуатации онлайн [42/97] 17499

D-Link DFL-100 Инструкция по эксплуатации онлайн [42/97] 17499
42
PPTP Status
The Point-to-Point Tunneling Protocol (PPTP) is another method of
establishing a secure tunnel between the DFL-100 and a remote gateway.
The PPTP Status page allows you to enable or disable PPTP on the DFL-100.
PPTP Server Status
PPTP can be Enabled or Disabled by clicking
the appropriate click-box and the clicking the
Apply.
Starting IP Address
This allows you to specify a range of IP
addresses for servers on your network that can
use the PPTP protocol. If you have only one IP
address, enter this address in both the Starting
IP Address and Ending IP Address fields.
Ending IP Address
This allows you to specify a range of IP
addresses for servers on your network that can
use the PPTP protocol. If you have only one IP
address, enter this address in both the Starting
IP Address and Ending IP Address fields.
Скачать
Случайные обсуждения

Ответы 1

Как отключить NAT на D-link DFL-100&
12 лет назад