D-Link DFL-100 Инструкция по эксплуатации онлайн [49/97] 17499

ending port number fields.

Trigger Type

This is the protocol (TCP or UDP) that the

application uses to make the connection.

Session Chaining

If the application allows a dynamic session

(connections) to trigger a new session, set this to

Enabled. If an application uses protocols in

addition to the TCP/UDP protocols (like many

interactive Internet games), then this application

will likely create additional sessions (using these

additional protocols) that will need to associate

with the first session. Again, Session Chaining

should be set to Enabled, for this type of

application,

Address Replacement

This option is used in Network Address

Translation (NAT) to translate a binary IP

address in a TCP/UDP packet. When a TCP or

UDP packet is received by the DFL-100, the IP

address in this packet will be translated between

the WAN and LAN side of the DFL-100, if this

option is enabled.

Allow sessions

initiated from/to 3

host

Set this option to Yes if your application allows

a new session to be started with a different

computer than the one that started the first

session. For example, MSN file transfer requires

a connection with a remote host, but this

connection is not direct. There are other MSN

servers between your PC and the MSN file

server.

Popular Applications

The settings for a range of popular applications

have been entered into the DFL-100’s firmware

and can be selected here from the drop-down

menu.