D-Link DFL-100 Инструкция по эксплуатации онлайн [52/97] 17499

Client IP Range Filtering

The Client Filters page allows you to deny access to the WAN (Internet) to

specific computers on your LAN, by specifying the computer’s MAC address.

To set an IP address filtering policy, click the Add/Modify click-box, select

Enabled under Policy Status, and then either Allow or Deny under Action.

You can then select the protocol that will be in use for this IP address

filtering policy, and enter the range of IP addresses in the From and To fields

under Source IP Address Range. In addition, you can select a range of port

numbers that will be used with the policy under Destination Port Range.