Rommelsbacher ct 2203/tc [21/24] Cooking level parameters

Activating the child-proof lock

By simultaneously applying the MINUS sensor (of the left cooking zone at the double cooking

plate) and the DUAL-CIRCUIT sensor and holding them for ca. 3 seconds, the whole control

will be locked. An “L” in the display and a signal tone indicate the active locking as soon as a

sensor is applied.

Deactivating the child-proof lock

For deactivating the lock and for realising all sensors, the MINUS sensor and the DUAL-CIRCUIT sensor

must be again simultaneously applied and held for ca. 3 seconds. A signal tone is audible, the indication

“L” distinguishes.

Afterwards, the previous setting or “H” for residual heat appears and all sensors can be operated again.

Switching-off by means of the ON/OFF sensor while the child-proof lock is active

If the control is completely switched off by means of the ON/OFF sensor while the child-proof lock is active,

all displays distinguish but the residual heat indication “H” might glow.

Switching the appliance on again is only possible after deactivating the child-proof lock (see above)!

After pulling the mains plug, the child-proof lock will not be active any more!

Tip: Apply the DUAL-CIRCUIT sensor twice, then apply the MINUS sensor additionally so that the desired

setting remains.

Operating time limitation

The operating time limitation causes an automatic switch-off of a cooking zone if the setting has not

been changed for a certain period of time. The periods of the operating time limitation depend on the set

cooking level. You can see the respective values in the following chart “Cooking level parameters”.

Afteranautomaticswitch-off,thecookingzonecanbeswitchedonanewandthemax.operatingtimeis

active again.

Cooking level parameters

Table see page 23