Sven AVR SLIM-1000 LCD [17/22] Wall mounted automatic voltage regulator

ENG

1. SAFETY PRECAUTIONS

Before using this device, please read the safety rules carefully:

• It is strongly forbidden to open the cover of the device, there is high voltage inside. If some

problems occur, please read the operation manual carefully or address an authorized service

center. For the list of authorized service centers please go to www.sven.ﬁ.

• Do not let liquid get inside the device, it can cause short circuit or electric shock.

• In case there are signs of improper operation of the device (sparkling, unusual smells, etc.),

unplug the device from the mains immediately and address your nearest authorized service center.

• It is forbidden to connect the automatic voltage regulator to devices with power consumption

higher than its maximum output power. It can cause breakdown of the device.

• Do not let children operate the device.

It is strongly forbidden to operate the device in the following conditions:

– in dusty environment or environment containing highly inﬂammable gas;

– at temperature higher than 40 °C or lower than 0 °C;

– at relative humidity level higher than 90 %;

– in direct sunlight or next to heating elements;

– in vibration areas;

– outdoors.

• In case of ﬁre use only powder ﬁre extinguisher, as water can cause electric shock.

2. PACKAGE CONTENTS

• Automatic voltage regulator — 1 pc

• Operation manual — 1 pc

• Warranty card — 1 pc

3. SPECIAL FEATURES

• CPU control

• Extended precision of output voltage regulation

• Protection of consumer-devices against high or low output voltage

• Protecting of consumer-devices from high-frequency and pulsed interference

• Stabilizer protection from overload and short circuit

• Autotransformer thermal protection

• Pause function (6 or 180 s) for safe voltage supply after power supply renewal

• Digital display of input/output voltage on the front panel

• Slim metal case with possibility of ﬁxing on the wall

4. DESCRIPTION (see. Fig. 1, 2 and 3)

a CЕТЬ (NETWORK): LED (green) lights up when there is a input voltage

b СТАБИЛИЗАЦИЯ (STABILIZATION): LED (yellow) lights up when operating stabilizer for rise/fall

if the input voltage display is turned oﬀ

c ЗАЩИТА (PROTECTION): LED (red) lights up in case of accident (high/low voltage protection

operation, autotransformer thermal overload), blinks at working oﬀ delay

Wall-Mounted Automatic

Voltage Regulator