Syma x11c [4/12] Cautions

-3-

Step 3: Push the throttle lever to the highest position

and then pull it back to the lowest position,this time

there will be one clear sound sending out from the

transmitter,this shows that the quad copter has

entered into the pre-fly state.

TIPS: When matching signal, keep the

quad copter on horizontal position

to fast matching and start a stable

flight.

CAUTIONS:

1.When the indicator of the transmitter appears eternal bright,however, the

indicator of the quadcopter appears slow flashing, this means that decoding is

not successful. This time please disconnect the power both of the quad

copter and transmitter, then repeat the pre-flying steps.

2.If the quadcopter is tilting to one side abruptly or spinning while hovering,

please switch off the power both of the quad copter and transmitter and then

repeat the pre-flying steps.

3.When the indicator of the quad copter keeps flashing slowly, it means that the

quad copter has entered into the low voltage protection state.This time you

need to charge the quadcopter.

FUNCTIONS MODE SWITCH, FINE-TUNING

RESET AND LEVEL CALIBRATION