Tp-Link wa701nd Инструкция по эксплуатации онлайн [38/83] 165956

TL-WA701ND 150Mbps Wireless N Access Point User Guide

• 11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect to the

device.

¾ Channel Width - Determines the channel width to be used. It is unnecessary to change the

default value unless required.

¾ Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations

to access the device.

¾ Enable SSID Broadcast - Select or deselect this check box to allow or deny the device to

broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local

area for wireless networks to associate with, they will detect the SSID broadcast by the

device.

)

Note:

To apply any settings you have altered on the page, please click the Save button, and then you

will be reminded to reboot the device.

2) Multi-SSID: This mode allows the device to support up to four SSIDs.

Figure 4-11 Wireless Settings in Multi-SSID mode

¾ Enable VLAN - Check this box and then you can change the VLAN ID of each SSID. If you

want to configure the Guest and Internal networks on VLAN, the switch you are using must

support VLAN. As a prerequisite step, configure a port on the switch for handling VLAN

tagged packets as described in the IEEE802.1Q standard, and enable this field.

¾ SSID (1-4) - Up to four SSIDs for each BSS (Basic Service Set) can be entered in the filed

SSID1 ~ SSID4. The name can be up to 32 characters. The same name (SSID) must be

assigned to all wireless devices in your network. If Enable VLAN is checked, the wireless

stations connecting to SSID of different VLANID can not communicate with each other.