Tp-Link tl-sg105e [12/43] Refresh

Easy Smart Configuration Utility

User Guide

The setting figure will be shown as below:

Figure 2-9 Switch Setting

You can configure the switch’s Device Description, DHCP Setting, IP Address, Subnet Mask and

Default Gateway on this page. The login User Name and Password are required to complete the

configuration. By default, they are both admin.

When the switch IP Address is not in the same subnet with host IP Address, it can be discovered

by the utility, but you cannot login the utility management page. Therefore, it needs to set the

switch IP Address in the same subnet with host IP Address, which allows you to login the utility

management page and configure the switch.

Clicking Apply can only make the new configurations effective before the switch is rebooted. If

you want to keep the configurations effective even the switch is rebooted, please select the

checkbox behind Save Config.

2.5 Refresh

Click Refresh in Figure 2-7 to restart the switch discovering process.