Yealink SIP-T19P E2 — как подключить IP-телефон через Ethernet и PoE [23/140]

Yealink SIP-T19P E2 [23/140] Power over ethernet
Getting Started
13
2. Connect the included or a standard Ethernet cable between the Internet port on
the phone and the one on the wall or switch/hub device port.
Power over Ethernet
With the included or a regular Ethernet cable, the SIP-T19P E2 IP phone can be powered
from a PoE-compliant switch or hub.
To connect the PoE for the SIP-T19P E2 IP phone:
1. Connect the Ethernet cable between the Internet port on the phone and an
available port on the in-line power switch/hub.
Note
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The LCD screen
displays “Welcome Initializingplease wait” during this process.
If in-line power is provided, you don’t need to connect the phone to the power adapter.
Make sure the switch/hub is PoE-compliant.
The phone can also share the network with another network device such as a PC
(personal computer). This is an optional connection.
Important! Do not remove power from the phone while it is updating firmware and
configurations.

Содержание

Узнайте, как правильно подключить IP-телефон через Ethernet и PoE. Пошаговая инструкция по настройке и инициализации устройства для оптимальной работы.

Скачать
Случайные обсуждения

Ответы 1

Телефон yealink завис на заставке welcome
6 месяцев назад