Yealink SIP-T19P E2 — настройка PPPoE для сетевых устройств: пошаговое руководство [27/140]

Yealink SIP-T19 E2 [27/140] Registration
Getting Started
17
mode. Set the WAN port as a PPPoE port. The PPPoE port will perform a PPP negotiation
to obtain the IP address. Contact your system administrator for the PPPoE user name
and password.
To configure PPPoE via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->WAN Port.
2. Press to select IPv4 and then press the Enter soft key.
3. Press to select PPPoE IPv4 Client and then press the Enter soft key.
4. Enter the user name and password in the corresponding fields.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready for use. The SIP-T19(P) E2 IP
phone supports only one account. If your phone is not registered, you may have to
register it. For more information on how to register your phone, refer to Account
Registration on page 53.
If the phone has successfully started up, the idle LCD screen will be displayed as below.
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.

Содержание

Узнайте, как настроить PPPoE на вашем устройстве. Пошаговая инструкция по вводу данных и проверке подключения для успешной работы в сети.

Скачать
Случайные обсуждения

Ответы 1

Телефон yealink завис на заставке welcome
6 месяцев назад