Yealink TA800 [10/64] Change ta400 800 s ip address using analog phones

TA400/800 User Manual

10/64

Attended Transfer

Default feature code: *3

1. Dial "*3" during the call;

2. Dial the called number after hearing a prompt "transfer";

3. Talk to the transfer recipient;

4. The call will be transferred after hanging up.

Three-party Conference

Users can make a three-party conference call on TA400/800.

Assuming that A and B are in the call and B wants to invite C to a conference. Please

check the following steps of how to establish a conference.

1. B presses "flash" key or taps hook flash to get a dial tone; A will hear the on hold

music meanwhile;

2. B dials C's number;

3. If C answers the call, then B presses "flash" key or tap hook flash, the conference

will be established, including A, B, and C.

4. If there is no answer on C, A can press "flash" key or tap hook flash to resume the

call with A.

5. C will be ejected if B presses "flash" key or taps flash hook during the conference

call.

Direct IP Call

Direct IP call allows two parties, that is, a FXS Port with an analog phone and another

VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. The

default "Direct IP Calling" feature code is *96.

Example:

Target IP address: 192.168.2.123

Destination port: 5060

To call the IP phone, you should dial *96192*168*2*123*5060 on the analog phone.

Change TA400/800’s IP Address Using Analog Phones

By default, TA400/800 obtains a dynamic IP address from the DHCP server. You can

change the device’s IP address via the analog phone which is connected to the FXS

port.

There are 3 modes supported on TA400/800 access the internet.

 DHCP

 Static IP Address

 PPPoE