![Graco S3000 — установка и обслуживание расходомеров: советы и рекомендации [7/24]](/img/pdf.png)
Graco S3000 — установка и обслуживание расходомеров: советы и рекомендации [7/24]
![Graco S3000 [7/24] Installation](/views2/1193363/page7/bg7.png)
Installation
308778U 7
Installation
Dust and Foreign Matter
Avoid having dust or foreign matter enter the flow meter
by taking the following precautions:
• Thoroughly flush the fluid supply lines before install-
ing the flow meter.
• When installing fittings, make sure that no sealing
tape overlaps into the inside of the pipe.
• Install a 100 mesh fluid filter upstream of the flow
meter.
Installing the Flow Meter
NOTE: You must assemble the meter sensor to the
meter body before connecting the cable to the sensor
for the meter to function properly.
• Flow volume can only be measured at the location
where the flow meter is installed.
• The Fluid Flow Meters are intrinsically safe for Haz-
ardous (Classified) Locations, when installed with
an intrinsically safe power device and wiring:
Class I, Div I, Group D, T3 (US and Canada)
Class I, Zone I Group IIA T3 (ATEX only)
TA = 0°C to 60°C
Refer to ANSI standards ISA-RP12.6, NEC Article
504 and the Canadian Electrical Code Appendix F.
• Do not use more than 200 ft. (61 m) of cable.
• Refer to F
IG. 1 to locate and install the flow meter,
connectors, and fluid shutoff valves. Install a check
valve to prevent backflow. The arrows on the flow
meter and check valve show the direction of fluid
flow.
• The shutoff valves allow you to isolate the meter for
service.
• Refer to Dimensions on page 20 and Technical
Data on page 22 for dimension, inlet/outlet size,
temperature and other specifications.
Improper wiring can cause fire and explosion, electric
shock, or other serious injury.
• Disconnect power source before installing.
• All electrical equipment must only be installed by
a qualified electrician.
• Understand and follow your local code and safety
regulations for hazardous location wiring of intrin-
sically safe circuits.
FIG. 1: Typical Installation
Cable
(see Table 1 on page 9
for available cables)
Electronic Sensor
Flow Meter
Fluid Line
Fluid Shutoff Valve
on outlet side
Ground Sheath
Check Valve
Fluid Shutoff Valve
on inlet side
7379A
Содержание
- Instructions parts p.1
- Important safety instructions p.1
- For precise metering of plural component fluids or solvents depending on model for professional use only p.1
- Volumetric fluid flow meter p.1
- Contents p.2
- Solvent meter kit p.3
- Meter models p.3
- Meter kits p.3
- Low pressure fluid meters p.3
- High pressure solvent meter p.3
- High pressure fluid meters p.3
- G3000 fluid meter kits p.3
- Warnings p.4
- Installation p.7
- Installing the flow meter p.7
- Dust and foreign matter p.7
- Atex certificate its12atex27565x system assembly certificate p.8
- Intrinsically safe installation requirements p.8
- Intrinsically safe installation p.8
- Meter cables and adaptor p.9
- Grounding p.9
- Recommended usage p.10
- Pressure relief procedure p.10
- Operation p.10
- Flow volume range p.10
- Flow meter function p.10
- Checking the meter accuracy p.10
- Troubleshooting p.11
- Maintenance p.12
- Flushing p.12
- Residue build up on the meter gears p.12
- Replacing the electronic sensor p.13
- Cleaning or servicing the meter chamber p.13
- Cleaning or servicing the solvent meter p.14
- V827 g3000hr meter kit p.15
- V804 g3000 meter kit p.15
- S3000 solvent meter kit p.15
- Flow meter kits for promix 2ks wall fluid panel p.15
- G3000 meter p.16
- G3000hr meter p.16
- Bare meter assemblies p.16
- G250hr meter p.17
- G250 meter p.17
- Solvent meter assembly p.18
- S3000 meter p.18
- Part nos 289813 and 289814 p.20
- Part nos 249426 and 249427 p.20
- Mounting holes bottom p.20
- G3000 and g3000hr p.20
- G250 and g250hr p.20
- Dimensions p.20
- Solvent meter p.21
- Part no 258718 p.21
- Part no 15u749 p.21
- Mounting holes bottom p.21
- Kit mounting bracket p.21
- Volumetric fluid flow meters p.22
- Technical data p.22
- Pressure drop curve p.23
- To place an order contact your graco distributor or call to identify the nearest distributor phone 612 623 6921 or toll free 1 800 328 0211 fax 612 378 3505 p.24
- Graco headquarters minneapolis international offices belgium china japan korea p.24
- For the latest information about graco products visit www graco com p.24
- Graco standard warranty p.24
- Graco information p.24
- Graco inc and subsidiaries p o box 1441 minneapolis mn 55440 1441 usa copyright 1997 graco inc all graco manufacturing locations are registered to iso 9001 www graco com revised november 2015 p.24
Похожие устройства
-
Graco EM8, жесткий носик, 1/2" NPT 25C903Инструкция к Graco EM8 25C903 -
Graco CoriolisСхема сборки -
Graco CoriolisИнструкция по эксплуатации -
Graco HG6000HRТехнические характеристики -
Graco HG6000HRИнструкция по эксплуатации -
Graco HG6000Технический паспорт
-
Graco HG6000Инструкция по эксплуатации
-
Graco S3000Технические характеристики
-
Graco G3000HRТехнические характеристики
-
Graco G3000HRИнструкция по эксплуатации -
Graco G3000Технические характеристики
-
Graco G3000Инструкция по эксплуатации
Изучите важные шаги по установке расходомеров, включая очистку линий, использование фильтров и соблюдение стандартов безопасности. Обеспечьте надежную работу оборудования.