Moxa AWK-1121-PoE-EU-T [5/13] Wall mounting optional

Moxa AWK-1121-PoE-EU [5/13] Wall mounting optional
- 5 -
Wall Mounting (optional)
For some applications, it may be more convenient to mount the
AWK-1121 to a wall, as illustrated below.
STEP 1:
Remove the aluminum
DIN
-rail attachment plate
from the AWK
-1121, and
then attach the wall mount
plates with M3 screws, as
shown in the adjacent
diagrams.
STEP 2:
Mounting the AWK
-1121 to a wall requires 4 screws.
Use the AWK
-1121 device, with wall mount plates
attached, as a guide to mark the correct locations of
the 4 screws. The heads of the screws should be less
than 6.0 mm in diameter, and the
shafts should be
less
than 3.5 mm in diameter, as shown in the figure
on
the
right.
Do not drive the screws in all the way into the wallleave a space of about
2 mm to allow room for sliding the wall mount panel between the wall and
the screws.
NOTE
Test the screw head and shank size by inserting the screw into
one of the k
eyhole shaped apertures of the wall-mounting p
lates
before attaching the plate to the wall.
STEP 3:
Once the screws are fixed into
the wall, insert the four screw
heads through the large opening
of
the keyhole-shaped
apertures, and then slide the
AWK
-1121 downwards, as
indicated to the right. Tighten
the four screws for added
stability.

Похожие устройства

Скачать