M-Audio Multimixer 10 [3/4] Multimixer 10 description

Tips. If you set the MultiMixer's gains too high for a

given input, you may encounter distortion or signal clip-

ping (red clipping LED stays solidly lit). This will surely

happen if you plug in a synthesizer with its channel gain

set to full volume and also set MultiMixer left and right

master level pots to full. If you hear any distortion try

reducing the keyboard output level. Your MultiMixer

should always sound clean and noise free.

MultiMixer 10 Description:

• Front – Headphones. 1/8” stereo jack. Plug your head-

phones in here. If you are using phones with a 1/4” jack

you will need an adaptor. You can also use the head-

phone jack as an auxiliary output.

• Top – 1-6 Gain. Adjustable gain levels for each individ-

ual input. These are true gain controls, not volume pots.

What this means is that the MultiMixer never amplifies

the signal more than necessary so the noise level is always

as low as possible (of course, if your sound source is noisy

the output will be too). The center detent position is

roughly unity gain. (Remember, the overall gain of chan-

nels 1 and 2 is set using the dip switches on the left side of

the MultiMixer)

• Top – 1-6 Pan. Controls where in the stereo image the

sound will appear. Adjustable from all the way left to all

the way right. The center detent position is equal mix

right and left.

• Top – Master Levels (Left and Right). Control the over

all left and right output levels. These pots also control

the level of the headphone output.

• Top – Power LED. Shows when MultiMixer6 is on.