Moxa UPort 1110 — установка и настройка драйвера для USB-to-Serial конвертеров [25/43]

UPort 1100 Series Installation and Configuration

2-16

Install Linux Driver

Linux Kernel 2.4.20 and above

The Linux driver for the Moxa UPort 1000 Series converters will map Linux host ttyUSBxx ports to UPort device

ports. Once the mapping has been set up, Linux users and applications can connect to a device port as if it were

a ttyUSBxx port. These drivers have been designed and tested for the majority of Linux distributions, including

Linux kernel version 2.4.20 and above. Please check Moxa’s website (http://www.moxa.com) for the latest

Linux kernel support.

The Linux drivers support the following models:

• UPort 1110: 1-port RS-232 USB-to-Serial Converter.

• UPort 1130: 1-port RS-422/485 USB-to-Serial Converter.

• UPort 1130I: 1-port RS-422/485 USB-to-serial converter with isolation protection.

• UPort 1150: 1-port RS-232/422/485 USB-to-Serial Converter.

• UPort 1150I: 1-port RS-232/422/485 USB-to-Serial Converter with isolation protection.

In this section, we provide four procedures to introduce the Moxa Linux Driver.

1. Installing the Linux Driver File

2. Loading/Unloading the Moxa Driver

3. Setting the Serial Parameters

4. Removing the Moxa Linux Driver

Installing the Linux Driver Files

Obtain the driver file from the Document and Software CD, or from the Moxa website at

http://www.moxa.com

To install and load the Linux drivers, enter the following commands from the Linux prompt:

# mount /dev/cdrom/ mnt

# cd /

# mkdir moxa

# cd /moxa

# cp /mnt/<driver directory>/driv_linux2.4_uport1p_vx.x_build_yymmddhh.tgz/moxa

# tar -xvfz driv_linux2.4_uport1p_vx.x_build_yymmddhh.tgz

# cd /mxu1100_24/driver

# make clean

# make install

*Note: yy = year, mm = month, dd = day, hh = hour

Loading the Moxa Driver

After installing the driver, you can load the Moxa driver. The driver will be loaded automatically when the UPort

1100 is plugged into your PC, or you can load the driver manually.

# modprobe mxuport1100_24

You can verify that the driver has loaded by entering the following command:

# lsmod

For additional information, please refer to readme.txt in the mxuport1100_24 directory.