Moxa UC-8416-CE [29/48] Dhcp allocator configuration

UC-8400 WinCE Management Tools

3-7

You can also change the authentication for each web virtual directory.

DHCP Allocator Configuration

The UC-8410/8416/8418/8430-CE computers’ DHCP Allocator configuration tool, called ICSCFG, can be used

to enable the Internet router function. Take the following steps to configure this tool:

1. Connect LAN1 to the Internet, and LAN3 to your PC.

2. Execute the ICSCFG command from the command line.

• Enable the DHCP Allocator? (Y/N): Y

• Which net interface will be the private interface? (1 to 3): 3

• IP address allocattion start range? (0 to 255): 130

• IP address allocation end range? (0 to 255): 250

• Set the DHCP lease time; 1 unit = 1 minute? (1 to 4294967295): 10

• Which net interface will be the public interface? (0 to 3, 0 to disable): 1

• Enable DNS Proxy? (Y/N): Y

• Enable NAT for Public Interface? (Y/N): Y

• Will take effect after rebooting. Reboot now? (Y/N): Y

When finished, reboot the computer, so that the function will be enabled. To disable the Internet router

function, run the ICSCFG in the command line, and select “n” in the configuration.

• Enable DHCP Allocator? (Y/N): N

You may also use the following command to configure all parameters together. See the following descriptions:

To disable DHCP Allocator:

\Windows\ICSCFG.exe -d

To enable DHCP Allocator:

\Windows\ICSCFG.exe -e [p1] [p2] [p3] [p4] [p5] [p6] [p7]

p1: Assign the Private Interface (1-3)

p2: Assign the IP address allocation start range (0-255)

p3: Assign the IP address allocate end range (0-255)