Moxa EXPC-1319-STS-FX-W7E [11/49] Expc 1319 series hardware introduction

EXPC-1319 Series Hardware Introduction

1-8

light transmission rates to decrease the brightness of LCD panel. Usually the light transmission rate of resistive

type touch screens is around 80%, while for capacitive types it is around 85% to 90%. Please note that the

screen is composed of hardened, scratch-resistant glass, and its anti-glare coating can still be scratched using

any abrasive with Mohs rating greater than 6.

Notice: Please calibrate your touch screen every time you reboot the system to ensure the touch screen works

properly. To review touch screen calibration, please refer to the Touch screen Calibration section in Chapter

4 of the EXPC-1319 Windows Embedded Standard 7 User’s Manual.

Moxa Intelligent Heating Solution

The EXPC-1319 may be ordered with Moxa’s patented Intelligent Heating Solution, to extend the effective

range of the platform’s operating temperature, with the caveats below. EXPC-1319 computers equipped with

IHS feature the heating solution on the display panel.

 The Intelligent Heating Solution will automatically initiate once the ambient temperature drops

below -20˚C.

 It takes about 40 to 50 minutes for the Intelligent Heating Solution to warm up the display panel.

Once IHS has completed the heating cycle, the LED indicator for the Heater will turn off. Until the

warming up cycle is completed, the display may be distorted or otherwise function poorly.

 Moxa Intelligent Heating Solution remains (minimally) powered up and operating even after the

computer has been taken offline. This is to ensure its automated response when ambient

temperatures drop below 0˚C.

 IHS may only be turned off by disconnecting the power supply.

 IHS requires a 120 W power supply.

NOTE

To ensure that the IHS

has been completely stopped, make sure to remove the power source after shutting

down the EXPC

-1319.