Moxa MC-5157-AC [19/56] Installing the internal sata storage drive

MC-5150-AC/DC Hardware Connection Description

3-7

3. Take off the storage bracket from the slot and turn over to get access to the four screws which will secure

the drive into place within the tray.

4. Place the drive into the tray and secure it in place using the four screws. When finished, insert the tray into

the computer and fasten the tray in place using the two thumbscrews on the front panel. Finally, complete

the installation by turning the key leftwards to lock the tray into place.

Installing the Internal SATA Storage Drive

The MC-5157-AC/DC has a SATA connector for installing one SATA hard disks. To install the 2.5-inch SATA hard

disk, follow these instructions.

IMPORTANT!

Moxa is continually testing SSDs for compatibility with MC

-5157 computers. As of June 2012, the Memoright

MRSAJ6C064GC125C00

and Memoright MRSAD4B060GC225C00

models of SSD have been fully approved for

use with MC

-51XX devices. However, this i

s only a partial list and one that is continually growing; for a more

-to-date list of which SSDs are certified compatible with MC-51XX computers, please contact Moxa’s

technical support team.

Turn over the MC-5157-AC/DC to get access to its bottom panel; remove the four screws on the drive bay cover

plate. The following figure shows what the location of the screws: