Moxa MD-124X [27/33] Auto setup

MD-124 HW Manual On-screen Display and Display Configuration

B-12

Image Information

Display-Picture-Picture Info-Main Source

Please note that a valid Main Source input signal must be present for this selection to work.

This item only displays all the information regarding the Main Source signal. The information displayed includes

the physical port and input name (software), current signal resolution, horizontal frequency (h-freq), and vertical

frequency (v-freq).

This item will not perform any changes or adjustments to the display settings and signals.

When selected, a box icon (█) will indicate that the selected function has been activated.

Display-Picture-Picture Info-Second Source

Please note that a valid Second Source input signal must be present for this function to work.

This item only displays all the information regarding the Second Source signal. The information displayed includes

the physical port and input name (software), current signal resolution, horizontal frequency (h-freq), and vertical

frequency (v-freq).

This item will not perform any changes or adjustments to the display settings and signals.

When selected, a box icon (█) will indicate that the selected function has been activated.

Auto-Setup

Display-Picture-Auto Setup

This is only available when the Main Source is set to an analog VGA/RGB signal.

This function will analyze the incoming source signal and attempt to auto-adjust the displayed image to correct for

improper aspect ratio, off-centered images, and improper phase or frequency (for analog signals). An attempt will

be made to reset all signals, but this will not affect the OSD Menu configuration or similar user settings.

This function may be used in cases where you suspect display issues have been introduced by faulty or unsuitable

configuration. It can also be used when troubleshooting set ups to determine if the reason for a faulty or undesirable

image is the cause of a panel malfunction, a mis-configuration, or from external equipment.

Press the right (►) button to activate. A confirmation request will appear. Use ↑/↓ to confirm.

Display Setup: OSD

Display-Setup-OSD Settings-Language

This function will choose the default language to use in all OSD Menu messages. The only language currently

available is English.

Display-Setup-OSD Settings-OSD Timeout (sec)

This increases/decreases the OSD Menu’s automatic timeout period (the time before the overlay automatically

disappears without the user having to manually exit).

Scale is from 5-30 seconds. 20 is default.

Display-Setup-OSD Settings-Transparency

This increases/decreases the alpha blend (also known as transparency) of the OSD Menu. When increased to

maximum, this means that all signal inputs and PIP/PBP images will show through the OSD Menu. It is used when