Moxa MD-124X [33/33] Power off

MD-124 HW Manual On-screen Display and Display Configuration

B-18

panel display. Aspect ratios for each image will be recalculated according to the new screen space, and may need

to be manually re-adjusted.

To adjust the PBP’s display properties, navigate to the Display-Picture-PIP

-POP Adjustment-PIP Picture

menu. From there, the PBP’s image properties (Brightness, Contrast, Sharpness, and Color) may be adjusted.

The dimensions and positioning of the PBP are not adjustable.

Should the Swap Source feature be selected, the input source (whether digital, RGB, or composite) configured as

the Main Source will be immediately switched out with the composite input signal currently configured as the PBP.

In PBP display mode, this will transfer the right image into the left position, and the left image into the right;

however, should the user attempt to return to Single mode from this configuration, the Composite input

(currently selected as the Main Source) will be displayed as the main image. To return the display to its original

configuration, simply select Swap Source once again and the display controller will return to its original display

configuration.

If, after configuring a PBP, the menu item Display-Source-Single is activated (and the Swap Source function has

not been activated) then the PBP will disappear, leaving only the Main Source input signal as a solitary display.

When selected, a box icon (█) will indicate that the selected function has been activated.

Power Off

Display-Power Off

This function will perform a (soft) power down (i.e., turns off) the unit, shutting down the display controller and

cutting internal power to all components except the power module. When power is shut off the unit will enter

standby mode, whereupon the red, left-most LED will illuminate, while the green, right-most LED will go dark.

Please note that so long as the power cable is still physically connected to the power module power

will still be present in the unit.

Press the right (►) button to activate. A confirmation dialog will appear. Use ↑/↓ to confirm.