Moxa MD-224Z [18/56] Powering on off the md 224

MD-224 Hardware Manual Hardware Connection Description

3-7

Powering on/off the MD-224

To power on the MD-224 Series you may connect the Terminal Block to Power Jack Converter to the

MD-224 Series DC terminal block (located on the bottom surface) and then connect a power adapter; or,

alternatively, you may power the device with the AC power cord. Touch the MENU button (in the lower right

corner of the display panel) for 1 second or use a UART command (MCC-0x9F-Power Down/Up Display) to turn

on the display.

To power off the MD-224 Series, touch the MENU button for 4 seconds until the green LED light of the MENU

button turns off, or use a UART command (MCC-0x9F-Power Down/Up Display) to turn off the display.

NOTE

If the

MD-224 is powered using a DC converter, an “OFF

” message will appear when the INFO dialog displays

the AC

power status and vice versa. This will not affect the MD-224’s operation.

SavvyTouch Display Control Buttons

The MD-224 Series comes with five SavvyTouch display control buttons located on the front surface. These

intelligent controls will light up as your hand draws near the area of the screen where they are located.

To configure the panel display settings, open the on-screen display (OSD) configuration panel by pressing the

MENU button. The LCD panel will then display a configuration menu superimposed over the currently displayed

image. The MENU button is for opening and closing the OSD, and brightness buttons "+/-" for navigating the

OSD menus.

The MENU button operates like a power button in that it enables users to turn on/off display. When you press

the button for 1 second, the display will power on and indicate a solid green status. To power off the MD-224,

press the MENU button for 4 seconds to turn the display and MENU Button LED to OFF. On the OSD MAIN MENU

page, the MENU button is also used to confirm a function.