Moxa OnCell G2151I [2/2] Creating csd connection
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa OnCell G2151I [2/2] Creating csd connection

Moxa OnCell G2151I [2/2] Creating csd connection
– 4 – – 5 – – 6 –
www.moxa.com/support
The Americas:
+1-714-528-6777 (toll-free: 1-888-669-2872)
Europe:
+49-89-3 70 03 99-0
Asia-Pacific:
+886-2-8919-1230
China:
+86-21-5258-9955 (toll-free: 800-820-5036)
2011 Moxa Inc. All rights reserved.
LED Indicators
Type
Color
Description
PWR
Green
DC power connection
STATUS
Amber
Slow Blinking: GSM registered to the base
station
Steady ON: GSM/CSD connected
Fast Blinking: GPRS connected
Tx
Green
Serial Tx
Rx
Amber
Serial Rx
GPRS Connection on Windows
Installing Windows Modem Driver
The following instructions are provided as a basic guide. Specific
steps may vary depending on your version of Windows and your
Windows settings. After successfully entering the PIN code:
1. In the Control Panel, open Phone and Modem Options and
select the Modems tab.
2. Click Add to add a new modem.
3. On the Install Modem page, select "Don’t detect my modem, I
will select it from a list" and click Next.
4. On the next page, select Standard Modem Types and choose
the Standard 19200 bps Modem. Click Next to proceed.
5. Select the COM port to which the modem is connected and click
Next.
6. Click Finish.
Setting Initialization Command
Before using GPRS, the APN (Access Point Name) must be added
as a modem initialization command.
1. In the Control Panel, open Phone and Modem Options and
select the Modems tab.
2. Select Standard 19200 kbps Modem from the table and
click Properties.
3. From the Properties window, select the Advanced tab. In the
Extra initialization commands text box, enter the
following:
AT+CGDCONT=1,"IP","<APN>"
For <APN>, use the correct service APN for your account.
Please note that this command is case-sensitive, as follows:
AT+CGDCONT=1,"IP","ISP.CINGULAR"
4. Click OK to close the modem Properties window.
NOTE
APN_List/APN_List.pdf on the Document and
Adding Windows DUN
1. In the Control Panel, open Network Connections.
2. Click Create a new connection.
3. The New Connection Wizard should appear. Click Next to
proceed.
4. On the Network Connection Type page, select Connect to
the Internet and click Next.
5. On the Getting Ready page, select Set up my connection
manually and click Next.
6. On the Internet Connection page, select Connect using a
dial-up modem and click Next.
7. On the Connection Name page, enter a name for the new
connection in the ISP Name field and click Next.
8. On the Dial screen page, enter *99***1# in the Phone
Number field and click Next.
NOTE
Creating CSD Connection
CSD (Circuit Switched Data) is the data transmission format for
GSM systems. With CSD, data is transmitted by direct calls to both
the GSM network and PSTN switching subsystem at 9.6 to 14.4
Kbit/sec. It is easy to establish a GSM CSD connection on the
dial-up side using the ATD command and the target phone number.
If the modem is intended to receive calls, the AT command
ATS0=<n> can be used to automatically answer a call, where <n>
is the number of rings before answering.
OnCell G2111 AT Command Set
On the Document and Software CD, please refer to
/AT_Commands/ G2111_AT_Commands.pdf
for information on AT commands.
Female DB9 Connector
The RS-232 connector uses standard pin assignments. A serial
cable such as Moxa’s CBL-F9M9-150 (100 cm) or CBL-F9M9-20 (20
cm) can be used. To connect the OnCell to a USB port on a laptop,
you can use a USB-to-serial product such as Moxa’s UPort 1110.

Содержание

Похожие устройства

Скачать