Moxa VPort 26A-1MP [36/82] System parameters

Moxa VPort 26A-1MP System Configuration

4-8

System Parameters

The System Parameters page allows you to view all system parameters, which are listed by category. The

content is the same as the VPort’s sys_config.ini file. Administrators can also save this information in a file

(sys_config.ini) by clicking the Export to a File button, or import a file by clicking the Browse button to search

for a sys_config.ini file and then clicking the Import a System Parameter File button to update the system

configuration quickly.

NOTE

The system parameter import/export functions allow the administrator to backup and restore system

configurations. The Administrator can export this sys_config.ini file (in a special binary format) for backup, and

import the sys_config.ini file to restore the system configurations of VPort IP cameras. System configuration

changes will take effect after the VPort is rebooted.

Firmware Upgrade

Take the following steps to upgrade the firmware:

Step 1:

Press the

Browse button to select the firmware file.

NOTE

For the VPort 26A

-1MP, the firmware file extension should be .rom.

Step 2:

Click on the

Upgrade button to upload the firmware to the VPort.

Step 3:

The system will start to

run the firmware upgrade process.

Step 4:

Once

Firmware Update Success…..Reboot.... is displayed, please wait for few seconds for the

VPort to reboot. The reboot process is finished once the

STAT LED is lit continuously in green.

NOTE

Upgrading the firm

ware will not change the original settings.