Moxa VPort 26A-1MP-T [56/82] Camera setting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa VPort 26A-1MP-T [56/82] Camera setting

Moxa VPort P26A-1MP-T [56/82] Camera setting
Moxa VPort 26A-1MP System Configuration
4-28
Camera Setting
A few camera parameters can be configured for improving image quality according to the environment.
Environment
Setting Description Default
Environment Choose what kind of environment will VPort camera be
installed, optimized parameters will be applied to best fit your
choice
Outdoor
Image Adjustment
Setting Description Default
Saturation Tune the image attribute for the user’s preference for -4 to +6
0
Contrast & Sharpness Tune the image attribute for the user’s preference for -4 to + 4
0
Auto Gain Control
(AGC)
This AGC function provides clear image in low light condition.
This controls an amplifier that is used
to boost the video signal
when the light dims so as to increase the camera’s sensitivity.
In some bright environment, the amplifier may be overloaded
and which may distort the video signal. So, it is necessary to
monitor the signal level with AGC control c
ircuit and AGC has to
be switched off in case of necessity.
16x
Black level control
(BLC)
This function changes the black level of the image. Higher
settings will make the image brighter, and lower settings will
make the image darker.
Middle
AWB
(Auto White Balance)
In most condition, you are suggested to choose ATW and allows
the camera to do automatic white balance adjustment. A
WB is
suggested when your camera is watching a scene with a certain
color occupy most for the view.
If you like to use AWB, follow below step.
Step 1: Move the camera to the white color in the real
environment with normal lighting
Step 2: Select AWB in the page and then press “Save”
Step 3: Move the camera back to the scene you are going to
watch. Then select the ATW for correcting the image color
ATW

Содержание

Похожие устройства

Скачать