D-Link DWS-3160-24TC [519/983] Specifies a range of ethernet oam ports to be cleared all specifies to clear all ethernet oam ports event_log specifies to clear ethernet oam event log information stati...

Содержание

• Table of contents 2
• 1 accessing the switch via the serial port 5
• Chapter 1 using command line interface 5
• 2 setting the switch s ip address 7
• An example to change the ip address of the switch to 10 0 0 1 using a subnet mask of 255 7
• Dws 3160 series gigabit ethernet unified switch cli reference guide 7
• Each switch must be assigned its own ip address which is used for communication with an snmp network manager or other tcp ip applications the switch s default ip address is 10 0 0 0 you can change the switch s default ip address to fit into your networking address range 7
• Note the first user automatically gets administrator level privileges at least one admin level user account must be created for the switch 7
• The ip address of the switch must be configured before it can be managed by the user via the web user interface 7
• The switch is also assigned a unique mac address by the factory this mac address cannot be changed and can be found by entering the command show switch into the command line interface as displayed below 7
• Also notice the subnet mask s notation method here we use the value 8 which means that the subnet mask will be change to 255 using the cidr notation 8
• Alternatively if you don t know the cidr notation for your subnet mask you can also simply type out the subnet mask for example config ipif system ipaddress 10 0 0 1 255 8
• At the cli command prompt enter the config ipif system ipaddress 10 0 0 1 8 command and press enter this will change the ip address of the switch to 10 0 0 1 8
• Dws 3160 series gigabit ethernet unified switch cli reference guide 8
• The switch can now be configured and accessed using telnet or the web based management the switch s ip address can also automatically be obtained by using the bootp or dhcp protocol 8
• There are a number of helpful features included in the cli entering the command will display a list of all of the top level commands 8
• When entering a command without its required parameters the cli will prompt you with a next possible completions message 8
• 3 command syntax symbols 10
• Dws 3160 series gigabit ethernet unified switch cli reference guide 10
• Encloses a variable or value users must specifies the variable or value for example in the syntax 10
• In the above example all of the possible next parameters for the show command are displayed 10
• Secondary state enable disable proxy_arp enable disable local enable disable 10
• Syntax description 10
• When entering the command do not type the angle 10
• 4 line editing keys 11
• A display the remaining pages the screen display will not pause again 12
• Backspace delete character to left of cursor and shift remainder of line to left 12
• Ctrl c quit from displaying more pages and return to the command prompt 12
• Delete delete character under cursor and shift remainder of line to left 12
• Dws 3160 series gigabit ethernet unified switch cli reference guide 12
• Enter display the next line 12
• Esc quit from displaying more pages and return to the command prompt 12
• In the below table all possible keystroke commands for the screen pause and the normal command prompt are explained 12
• Insert toggle on and off when toggled on inserts text and shifts previous 12
• Keys description 12
• Left arrow move cursor to left 12
• P display the previous page 12
• Q quit from displaying more pages and return to the command prompt 12
• Right arrow move cursor to right 12
• Space or n display the next page 12
• Tab help user to select appropriate token 12
• Text to right 12
• 1 show session 14
• Chapter 2 basic command list 14
• Description 14
• Example 14
• Format 14
• Parameters 14
• Restrictions 14
• 2 show serial_port 15
• 3 config serial_port 15
• Description 15
• Dws 3160 series gigabit ethernet unified switch cli reference guide 15
• Example 15
• Format 15
• Parameters 15
• Restrictions 15
• Show serial_port 15
• This command is used to configure the serial port configuration which includes the bit rate that will be used to communicate with the management host and the automatic logout time for idled connections 15
• This command is used to display the serial port configuration 15
• To display the serial port configuration 15
• 4 enable clipaging 16
• Description 16
• Example 16
• Format 16
• Parameters 16
• Restrictions 16
• 5 disable clipaging 17
• 6 login 17
• Description 17
• Example 17
• Format 17
• Parameters 17
• Restrictions 17
• 7 logout 18
• Description 18
• Example 18
• Format 18
• Parameters 18
• Restrictions 18
• Description 19
• Dws 3160 series gigabit ethernet unified switch cli reference guide 19
• Example 19
• Format 19
• If no parameter is specified then all top level commands will be displayed 19
• Needed from here 19
• Optional enter the cli command that the usage and description information is 19
• Parameters 19
• Restrictions 19
• This command is used to display the usage and description information for a specific command 19
• To get ping command s usage and description information 19
• 10 show command_history 20
• 9 clear 20
• Description 20
• Example 20
• Format 20
• Parameters 20
• Restrictions 20
• 11 config command_history 21
• 12 config greeting_message 21
• Command_history specifies the number of commands that the switch can recall 21
• Description 21
• Dws 3160 series gigabit ethernet unified switch cli reference guide 21
• Enter the command history value here this value must be between 1 and 40 21
• Example 21
• Format 21
• Parameters 21
• Restrictions 21
• This command is used to configure the greeting message or banner 21
• This command is used to configure the number of commands that the switch can recall 21
• To configure the number of the command history 21
• 13 show greeting_message 22
• Config greeting_message default 22
• Default optional specifies that the greeting message banner will be returned to its original 22
• Description 22
• Dws 3160 series gigabit ethernet unified switch cli reference guide 22
• Example 22
• Factory default state 22
• Format 22
• Only administrators and operators can issue this command 22
• Parameters 22
• Restrictions 22
• Show greeting_message 22
• The command is used to display the greeting message 22
• To edit the banner 22
• 14 config command_prompt 23
• Description 23
• Example 23
• Format 23
• Parameters 23
• Restrictions 23
• 15 config terminal width 24
• Description 24
• Example 24
• Format 24
• Parameters 24
• Restrictions 24
• 16 show terminal width 25
• 17 config ports 25
• Description 25
• Example 25
• Format 25
• Parameters 25
• Restrictions 25
• 18 show ports 26
• Description 26
• Example 26
• Restrictions 26
• Description err_disabled details media_type 27
• Description optional indicates if port description will be included in the display err_disabled optional indicates if ports are disabled by some reasons will be displayed details optional displays the port details media_type optional displays port transceiver type 27
• Dws 3160 series gigabit ethernet unified switch cli reference guide 27
• Example 27
• Format 27
• Optional enter the list of ports to be configured here 27
• Parameters 27
• Ports specifies a range of ports to be displayed 27
• Restrictions 27
• To display the port details 27
• 1 create vlan 28
• Chapter 3 802 q vlan command list 28
• Description 28
• Format 28
• Parameters 28
• 2 create vlan vlanid 29
• Description 29
• Example 29
• Format 29
• Parameters 29
• Restrictions 29
• 3 delete vlan 30
• 4 delete vlan vlanid 30
• Description 30
• Example 30
• Format 30
• Parameters 30
• Restrictions 30
• 5 config vlan 31
• Description 31
• Example 31
• Format 31
• Parameters 31
• Restrictions 31
• 6 config vlan vlanid 32
• Description 32
• Example 32
• Format 32
• Parameters 32
• Restrictions 32
• 7 config port_vlan 33
• Description 33
• Example 33
• Format 33
• Parameters 33
• Restrictions 33
• 8 show vlan 34
• Description 34
• Example 34
• Format 34
• Parameters 34
• Restrictions 34
• 9 show vlan ports 35
• Description 35
• Dws 3160 series gigabit ethernet unified switch cli reference guide 35
• Enter the list of ports that will be displayed here 35
• Example 35
• Format 35
• Parameters 35
• Port optional specifies the list of ports for which the vlan information will be displayed 35
• Restrictions 35
• This command is used to display the vlan configuration per port 35
• To display the vlan configuration for port 6 35
• 10 show vlan vlanid 36
• 11 show port_vlan 36
• Description 36
• Example 36
• Format 36
• Parameters 36
• Restrictions 36
• 12 enable pvid auto assign 37
• By default this setting is enabled 37
• Description 37
• Dws 3160 series gigabit ethernet unified switch cli reference guide 37
• Example 37
• If this feature is enabled the pvid will possibly be changed by the pvid or the vlan configuration when a user configures a port to vlan x s untagged membership this port s pvid will be updated with vlan x the pvid is updated with the last item of the vlan list when a user removes a port from the untagged membership of the pvid s vlan the port s pvid will be assigned with a default vlan parameter 37
• Optional specifies a range of ports to be displayed if no parameter specified system will display all ports gvrp information 37
• Parameters 37
• Restrictions 37
• The command is used to enable the auto assignment of pvid 37
• To display the 802 q port setting 37
• 13 disable pvid auto assign 38
• Description 38
• Example 38
• Format 38
• Parameters 38
• Restrictions 38
• 14 show pvid auto_assign 39
• 15 config gvrp 39
• Description 39
• Example 39
• Format 39
• Parameters 39
• Restrictions 39
• 16 show gvrp 40
• Description 40
• Example 40
• Format 40
• Parameters 40
• Restrictions 40
• 17 enable gvrp 41
• 18 disable gvrp 41
• Description 41
• Example 41
• Format 41
• Parameters 41
• Restrictions 41
• 19 config private_vlan 42
• Description 42
• Example 42
• Format 42
• Parameters 42
• Restrictions 42
• 20 show private vlan 43
• Description 43
• Dws 3160 series gigabit ethernet unified switch cli reference guide 43
• Enter the vlan id used here 43
• Example 43
• Format 43
• Only administrators and operators can issue this command 43
• Optional specifies the name of the private vlan or its secondary vlan 43
• Parameters 43
• Restrictions 43
• This command is used to display the private vlan configuration 43
• This name can be up to 32 characters long vlanid optional specifies the vlan id of the private vlan or its secondary vlan 43
• To display the private vlan configuration 43
• 1 enable 802 x 44
• Chapter 4 802 x command list 44
• Description 44
• Format 44
• 2 disable 802 x 45
• Description 45
• Example 45
• Format 45
• Parameters 45
• Restrictions 45
• 3 create 802 x user 46
• 4 delete 802 x user 46
• Description 46
• Example 46
• Format 46
• Parameters 46
• Restrictions 46
• 5 show 802 x user 47
• 6 config 802 x auth_protocol 47
• Description 47
• Example 47
• Format 47
• Parameters 47
• Restrictions 47
• 7 config 802 x fwd_pdu system 48
• Description 48
• Example 48
• Format 48
• Parameters 48
• Restrictions 48
• 8 config 802 x fwd_pdu ports 49
• 9 config 802 x authorization attributes 49
• Description 49
• Example 49
• Format 49
• Parameters 49
• Restrictions 49
• 10 show 802 x 50
• Description 50
• Example 50
• Format 50
• Parameters 50
• Restrictions 50
• 11 config 802 x capability 51
• All authenticator none 51
• Authenticator the port that wishes to enforce authentication before allowing access to services 51
• Description 51
• Dws 3160 series gigabit ethernet unified switch cli reference guide 51
• Enter the list of ports used for the configuration here all specifies all ports to be configured 51
• Example 51
• Format 51
• None disable authentication on the specified ports 51
• Only administrators operators and power users can issue this command 51
• Parameters 51
• Ports specifies a range of ports to be configured 51
• Restrictions 51
• That are accessible via that port adopts the authenticator role 51
• This command is used to configure port capabilities 51
• To configure port capabilities 51
• 12 config 802 x max_users 52
• 13 config 802 x auth_parameter 52
• Description 52
• Example 52
• Format 52
• Parameters 52
• Restrictions 52
• Example 53
• Parameters 53
• Restrictions 53
• 14 config 802 x auth_mode 54
• 15 config 802 x init 54
• Description 54
• Example 54
• Format 54
• Parameters 54
• Restrictions 54
• 16 config 802 x reauth 55
• Description 55
• Example 55
• Format 55
• Parameters 55
• Restrictions 55
• 17 create 802 x guest_vlan 56
• 18 delete 802 x guest_vlan 56
• Description 56
• Example 56
• Format 56
• Parameters 56
• Restrictions 56
• 19 config 802 x guest_vlan 57
• Description 57
• Example 57
• Format 57
• Parameters 57
• Restrictions 57
• 20 show 802 x guest_vlan 58
• 21 config radius add 58
• Description 58
• Example 58
• Format 58
• Parameters 58
• Restrictions 58
• 22 config radius delete 59
• Description 59
• Example 59
• Format 59
• Parameters 59
• Restrictions 59
• 23 config radius 60
• Description 60
• Example 60
• Format 60
• Parameters 60
• Restrictions 60
• 24 show radius 61
• Description 61
• Example 61
• Format 61
• Parameters 61
• Restrictions 61
• 25 show auth_statistics 62
• Description 62
• Example 62
• Format 62
• Parameters 62
• Restrictions 62
• 26 show auth_diagnostics 63
• Description 63
• Dws 3160 series gigabit ethernet unified switch cli reference guide 63
• Enter the list of ports that will be displayed here 63
• Example 63
• Format 63
• Parameters 63
• Ports optional specifies a range of ports to be displayed 63
• Restrictions 63
• This command is used to display information of authenticator diagnostics 63
• To display authenticator diagnostics information for port 1 63
• 27 show auth_session_statistics 64
• Description 64
• Dws 3160 series gigabit ethernet unified switch cli reference guide 64
• Enter the list of ports that will be displayed here 64
• Example 64
• Format 64
• Parameters 64
• Ports optional specifies a range of ports to be displayed 64
• Restrictions 64
• This command is used to display information of authenticator session statistics 64
• To display authenticator session statistics information for port 1 64
• 28 show auth_client 65
• Description 65
• Dws 3160 series gigabit ethernet unified switch cli reference guide 65
• Example 65
• Format 65
• Parameters 65
• Restrictions 65
• Show auth_client 65
• This command is used to display information of radius authentication client 65
• To display authentication client information 65
• 29 show acct_client 66
• Description 66
• Dws 3160 series gigabit ethernet unified switch cli reference guide 66
• Example 66
• Format 66
• Parameters 66
• Restrictions 66
• Show acct_client 66
• This command is used to display information of radius accounting client 66
• To display information of radius accounting client 66
• 30 config accounting service 67
• Config accounting service network shell system state enable disable 67
• Description 67
• Dws 3160 series gigabit ethernet unified switch cli reference guide 67
• Enable specifies to enable the specified accounting service disable specifies to disable the specified accounting service 67
• Format 67
• Network accounting service for 802 x port access control by default the service is disabled shell accounting service for shell events when user logs on or out the switch via the console 67
• Only administrators and operators can issue this command 67
• Parameters 67
• Restrictions 67
• System accounting service for system events reset reboot by default the service is disabled state specifies the state of the specified service 67
• Telnet or ssh and timeout occurs accounting information will be collected and sent to radius server by default the service is disabled 67
• This command is used to configure the state of the specified radius accounting service 67
• 31 show accounting service 68
• Description 68
• Dws 3160 series gigabit ethernet unified switch cli reference guide 68
• Enable it to configure accounting shell state 68
• Example 68
• Format 68
• Parameters 68
• Restrictions 68
• Show accounting service 68
• This command is used to display the status of radius accounting services 68
• To display information of radius accounting services 68
• 1 enable password encryption 69
• Chapter 5 access authentication control command list 69
• Description 69
• Format 69
• 2 disable password encryption 70
• Description 70
• Example 70
• Format 70
• Parameters 70
• Restrictions 70
• 3 enable authen_policy 71
• 4 disable authen_policy 71
• Description 71
• Example 71
• Format 71
• Parameters 71
• Restrictions 71
• 5 show authen_policy 72
• 6 create authen_login 72
• Description 72
• Example 72
• Format 72
• Parameters 72
• Restrictions 72
• 7 config authen_login 73
• Description 73
• Example 73
• Format 73
• Parameters 73
• Restrictions 73
• 8 delete authen_login 74
• Description 74
• Example 74
• Format 74
• Parameters 74
• Restrictions 74
• 10 create authen_enable 75
• 9 show authen_login 75
• Description 75
• Example 75
• Format 75
• Parameters 75
• Restrictions 75
• 11 config authen_enable 76
• Description 76
• Example 76
• Format 76
• Parameters 76
• Restrictions 76
• 12 delete authen_enable 77
• 13 show authen_enable 77
• Description 77
• Example 77
• Format 77
• Parameters 77
• Restrictions 77
• 14 config authen application 78
• Description 78
• Example 78
• Format 78
• Parameters 78
• Restrictions 78
• 15 show authen application 79
• Description 79
• Example 79
• Format 79
• Parameters 79
• Restrictions 79
• 16 create authen server_group 80
• 17 config authen server_group 80
• Description 80
• Example 80
• Format 80
• Parameters 80
• Restrictions 80
• 18 delete authen server_group 81
• Description 81
• Example 81
• Format 81
• Parameters 81
• Restrictions 81
• 19 show authen server_group 82
• 20 create authen server_host 82
• Characters long 82
• Description 82
• Dws 3160 series gigabit ethernet unified switch cli reference guide 82
• Example 82
• Format 82
• Only administrators can issue this command 82
• Optional the built in or user defined server group name this value can be up to 82
• Parameters 82
• Restrictions 82
• This command is used to create an authentication server host when an authentication server host is created ip address and protocol are the index that means over 1 authentication protocol 82
• This command is used to display the authentication server groups 82
• To display all authentication server groups 82
• Example 83
• Format 83
• Parameters 83
• Restrictions 83
• 21 config authen server_host 84
• Description 84
• Example 84
• Format 84
• Parameters 84
• Restrictions 84
• 22 delete authen server_host 85
• 23 show authen server_host 85
• Description 85
• Example 85
• Format 85
• Parameters 85
• Restrictions 85
• 24 config authen parameter response_timeout 86
• Description 86
• Example 86
• Format 86
• Parameters 86
• Restrictions 86
• 25 config authen parameter attempt 87
• 26 show authen parameter 87
• Description 87
• Example 87
• Format 87
• Parameters 87
• Restrictions 87
• 27 enable admin 88
• Description 88
• Example 88
• Format 88
• Parameters 88
• Restrictions 88
• 28 config admin local_enable 89
• Description 89
• Example 89
• Format 89
• Parameters 89
• Restrictions 89
• Chapter 6 access control list acl command list 90
• 1 create access_profile 91
• Description 91
• Format 91
• Parameters 91
• 2 delete access_profile 93
• All specifies that the whole access list profile will be deleted 93
• Description 93
• Dws 3160 series gigabit ethernet unified switch cli reference guide 93
• Enter the profile id value here this value must be between 1 and 6 93
• Enter the profile name here this value must be between 1 and 32 93
• Example 93
• Format 93
• Only administrators operators and power users can issue this command 93
• Parameters 93
• Profile_id specifies the index of the access list profile 93
• Profile_name specifies the name of the profile the maximum length is 32 characters 93
• Restrictions 93
• This command is used to delete an access profile 93
• To create an access profile 93
• 3 config access_profile 94
• Description 94
• Example 94
• Format 94
• Parameters 94
• 4 show access_profile 98
• Description 98
• Example 98
• Format 98
• Parameters 98
• Restrictions 98
• Dws 3160 series gigabit ethernet unified switch cli reference guide 99
• Example 99
• To display the current access list table 99
• Dws 3160 series gigabit ethernet unified switch cli reference guide 100
• The following example displays an access profile that supports an entry mask for each rule 100
• The following example displays the packet content mask profile for the profile with an id of 4 100
• 5 config flow_meter 101
• Description 101
• Dws 3160 series gigabit ethernet unified switch cli reference guide 101
• For single rate three color mode users need to specifies the committed rate in kbps the committed burst size and the excess burst size 101
• For the single rate two color mode users may set the preferred bandwidth for this rule in kbps and once the bandwidth has been exceeded overflowing packets will either be dropped or have a drop precedence set depending on the user configuration 101
• For the two rate three color mode users need to specifies the committed rate in kbps the committed burst size the peak rate and the peak burst size 101
• The green color packet will be treated as the conforming action the yellow color packet will be treated as the exceeding action and the red color packet will be treated as the violating action 101
• There are two cases for mapping the color of a packet color blind mode and color aware mode in the color blind case the determination for the packet s color is based on the metering result in the color aware case the determination for the packet s color is based on the metering result and the ingress dscp 101
• This command is used to configure the flow based metering function the metering function supports three modes single rate two color single rate three color and two rate three color the access rule must be created before the parameters of this function can be applied 101
• When color blind or color aware is not specified color blind is the default mode 101
• Format 102
• Parameters 102
• 6 show flow_meter 104
• Description 104
• Example 104
• Format 104
• Parameters 104
• Restrictions 104
• 7 config time_range 105
• Description 105
• Example 105
• Format 105
• Parameters 105
• Restrictions 105
• 8 show time_range 106
• Description 106
• Example 106
• Format 106
• Parameters 106
• Restrictions 106
• 9 show current_config access_profile 107
• Description 107
• Example 107
• Format 107
• Parameters 107
• Restrictions 107
• Dws 3160 series gigabit ethernet unified switch cli reference guide 108
• Chapter 7 access control list acl egress command list 109
• 1 create egress_access_profile 110
• Description 110
• Format 110
• Parameters 110
• 2 delete egress_access_profile 111
• Description 111
• Example 111
• Restrictions 111
• 3 config egress_access_profile 112
• Description 112
• Example 112
• Format 112
• Parameters 112
• Restrictions 112
• Parameters 113
• 4 show egress_access_profile 116
• Description 116
• Example 116
• Format 116
• Parameters 116
• Restrictions 116
• Dws 3160 series gigabit ethernet unified switch cli reference guide 117
• Example 117
• Restrictions 117
• To display current egress access list table 117
• 5 show current_config egress_access_profile 118
• Description 118
• Dws 3160 series gigabit ethernet unified switch cli reference guide 118
• The following example displays an egress access profile that supports an entry mask for each rule 118
• This command is used to display the egress acl part of current configuration in user level of privilege the overall current configuration can be displayed by show config command which is accessible in administrator level of privilege 118
• 6 config egress_flow_meter 119
• Counter 119
• Description 119
• Dws 3160 series gigabit ethernet unified switch cli reference guide 119
• Example 119
• Format 119
• Parameters 119
• Restrictions 119
• Show current_config egress_access_profile 119
• This command is used to configure the packet flow based metering based on an egress access profile and rule 119
• To display current configuration of egress access list table 119
• Parameters 120
• Restrictions 121
• 7 show egress_flow_meter 122
• Description 122
• Example 122
• Format 122
• Parameters 122
• Restrictions 122
• 8 create port_group 123
• Description 123
• Dws 3160 series gigabit ethernet unified switch cli reference guide 123
• Enter the port group id here this value must be between 1 and 64 123
• Enter the port group name here this name can be up to 16 characters long 123
• Example 123
• Format 123
• Id specifies the port group id 123
• Name specifies the port group name 123
• Only administrators and operators can issue this command 123
• Parameters 123
• Restrictions 123
• This command is used to create a port group 123
• To create a port group 123
• 10 delete port_group 124
• 9 config port_group 124
• Description 124
• Example 124
• Format 124
• Parameters 124
• Restrictions 124
• 11 show port_group 125
• Description 125
• Example 125
• Format 125
• Parameters 125
• Restrictions 125
• Dws 3160 series gigabit ethernet unified switch cli reference guide 126
• 1 create arpentry 127
• 2 delete arpentry 127
• Chapter 8 address resolution protocol arp command list 127
• Description 127
• Example 127
• Format 127
• Parameters 127
• Restrictions 127
• 3 config arpentry 128
• Description 128
• Example 128
• Format 128
• Parameters 128
• Restrictions 128
• 4 config arp_aging time 129
• 5 clear arptable 129
• Description 129
• Example 129
• Format 129
• Parameters 129
• Restrictions 129
• 6 show arpentry 130
• Description 130
• Example 130
• Format 130
• Parameters 130
• Restrictions 130
• Dws 3160 series gigabit ethernet unified switch cli reference guide 131
• 1 config arp_spoofing_prevention 132
• Chapter 9 arp spoofing prevention command list 132
• Description 132
• Example 132
• Format 132
• Parameters 132
• Restrictions 132
• 2 show arp_spoofing_prevention 133
• Description 133
• Dws 3160 series gigabit ethernet unified switch cli reference guide 133
• Example 133
• Format 133
• Only administrators and operators can issue this command 133
• Parameters 133
• Restrictions 133
• Show arp_spoofing_prevention 133
• This command is used to display the arp spoofing prevention entry 133
• To display the arp spoofing prevention entries 133
• 1 enable asymmetric_vlan 134
• 2 disable asymmetric_vlan 134
• Chapter 10 asymmetric vlan command list 134
• Description 134
• Example 134
• Format 134
• Parameters 134
• Restrictions 134
• 3 show asymmetric_vlan 135
• Description 135
• Example 135
• Format 135
• Parameters 135
• Restrictions 135
• 1 enable autoconfig 136
• 2 disable autoconfig 136
• Chapter 11 auto configuration command list 136
• Description 136
• Example 136
• Format 136
• Parameters 136
• Restrictions 136
• 3 show autoconfig 137
• Description 137
• Example 137
• Format 137
• Parameters 137
• Restrictions 137
• 1 create account 138
• Chapter 12 basic commands command list 138
• Description 138
• Format 138
• Parameters 138
• 2 config account 139
• Description 139
• Example 139
• Format 139
• Parameters 139
• Restrictions 139
• 3 show account 140
• Description 140
• Example 140
• Format 140
• Parameters 140
• Restrictions 140
• 4 delete account 141
• Description 141
• Dws 3160 series gigabit ethernet unified switch cli reference guide 141
• Example 141
• Format 141
• Name of the user who will be deleted 141
• Only administrators can issue this command 141
• Parameters 141
• Restrictions 141
• This command is used to delete an existing account 141
• To delete the user account system 141
• To display the accounts that have been created 141
• 5 show switch 142
• Description 142
• Dws 3160 series gigabit ethernet unified switch cli reference guide 142
• Example 142
• Format 142
• Parameters 142
• Restrictions 142
• Show switch 142
• The following is an example for display of switch information 142
• This command is used to display the switch information 142
• 6 enable telnet 143
• 7 disable telnet 143
• Description 143
• Example 143
• Format 143
• Parameters 143
• Restrictions 143
• 8 enable web 144
• 9 disable web 144
• Description 144
• Example 144
• Format 144
• Parameters 144
• Restrictions 144
• 10 reboot 145
• 11 reset 145
• Description 145
• Example 145
• Format 145
• Parameters 145
• Restrictions 145
• 12 config firmware 146
• Description 146
• Example 146
• Format 146
• Parameters 146
• Restrictions 146
• 13 create ipif 147
• Description 147
• Example 147
• Format 147
• Parameters 147
• Restrictions 147
• 14 config ipif 148
• Description 148
• Example 148
• Format 148
• Parameters 148
• Restrictions 148
• 15 delete ipif 149
• Description 149
• Example 149
• Format 149
• Parameters 149
• Restrictions 149
• 16 enable ipif 150
• 17 disable ipif 150
• Description 150
• Example 150
• Format 150
• Parameters 150
• Restrictions 150
• 18 show ipif 151
• Description 151
• Example 151
• Format 151
• Parameters 151
• Restrictions 151
• 19 enable ipif_ipv6_link_local_auto 152
• All specifies that all the ip interfaces will be used 152
• Description 152
• Dws 3160 series gigabit ethernet unified switch cli reference guide 152
• Enter the ip interface name used here this name can be up to 12 characters 152
• Example 152
• Format 152
• Only administrators operators and power users can issue this command 152
• Parameters 152
• Restrictions 152
• This command is used to enable the automatic configuration of a link local address when there are no ipv6 addresses explicitly configured when an ipv6 address is explicitly configured the link local address will be automatically configured and the ipv6 processing will be started when there is no ipv6 address explicitly configured by default link local address is not configured and the ipv6 processing will be disabled by enable this automatic configuration the link local address will be automatically configured and ipv6 processing will be started 152
• To enable the ip interface for ipv6 link local automatic 152
• 20 disable ipif_ipv6_link_local_auto 153
• 21 show ipif_ipv6_link_local_auto 153
• Description 153
• Example 153
• Format 153
• Parameters 153
• Restrictions 153
• Example 154
• Restrictions 154
• 1 config bpdu_protection ports 155
• Chapter 13 bpdu attack protection command list 155
• Description 155
• Format 155
• Parameters 155
• Restrictions 155
• 2 config bpdu_protection recovery_interval 156
• 3 config bpdu_protection 156
• Description 156
• Example 156
• Format 156
• Parameters 156
• Restrictions 156
• 4 enable bpdu_protection 157
• Description 157
• Example 157
• Format 157
• Parameters 157
• Restrictions 157
• 5 disable bpdu_protection 158
• 6 show bpdu_protection 158
• Description 158
• Example 158
• Format 158
• Parameters 158
• Restrictions 158
• Dws 3160 series gigabit ethernet unified switch cli reference guide 159
• Example 159
• Restrictions 159
• To display the bpdu protection for the entire switch 159
• To display the bpdu protection status ports 1 12 159
• 1 cable_diag ports 160
• Chapter 14 cable diagnostics command list 160
• Description 160
• Format 160
• Parameters 160
• Restrictions 160
• Dws 3160 series gigabit ethernet unified switch cli reference guide 161
• Example 161
• Test the cable on port 1 2 3 23 and 24 161
• Chapter 15 captive portal command list 162
• 1 enable captive_portal 163
• 2 disable captive_portal 163
• Description 163
• Example 163
• Format 163
• Parameters 163
• Restrictions 163
• 3 config captive_portal 164
• Description 164
• Example 164
• Format 164
• Parameters 164
• Restrictions 164
• 4 config captive_portal trap 165
• Description 165
• Format 165
• Parameters 165
• Restrictions 165
• 5 show captive_portal 166
• Description 166
• Example 166
• Format 166
• Parameters 166
• Restrictions 166
• Administrative mode displays whether the cp is enabled or not operational status indicates whether the cp operational status is enabled or disabled disable reason if the cp is disabled this field displays the reason which can be none 167
• Administrator disabled ip address not configured no ip routing interface or routing disabled 167
• Captive portal ip address displays the ip address that the captive portal feature uses 167
• Dws 3160 series gigabit ethernet unified switch cli reference guide 167
• In the above examples the following display parameters can be noticed 167
• To display summarized information about the captive portal s configuration when the captive portal is disabled 167
• To display the reporting status of all captive portal instances in the system 167
• To display which captive portal snmp traps are enabled 167
• 6 create captive_portal configuration 168
• Description 168
• Example 168
• Format 168
• Parameters 168
• Restrictions 168
• 7 delete captive_portal configuration 169
• 8 config captive_portal configuration 169
• Description 169
• Example 169
• Format 169
• Parameters 169
• Restrictions 169
• Parameters 170
• Example 174
• Restrictions 174
• Dws 3160 series gigabit ethernet unified switch cli reference guide 175
• To configure the session timeout value for the captive portal configuration 175
• To configure the verification mode for the captive portal configuration 175
• To customize the background color of the captive portal authentication page 175
• To enable the user logout option for the captive portal configuration 175
• To enable traffic blocking on the captive portal configuration 1 175
• Dws 3160 series gigabit ethernet unified switch cli reference guide 176
• To configure a redirect url for the captive portal configuration 176
• To configure the group for the captive portal configuration 176
• To configure the name for the captive portal configuration 176
• To configure the protocol for the captive portal configuration 176
• To enable the redirect mode option for the captive portal configuration 176
• 9 show captive_portal configuration 177
• Description 177
• Format 177
• Parameters 177
• Dws 3160 series gigabit ethernet unified switch cli reference guide 178
• Example 178
• Restrictions 178
• To display all the interfaces assigned to the captive portal configuration 1 178
• To display information of a specific captive portal configuration 178
• To display information of all configured captive portal configurations 178
• To display the status of the physical port 2 for the captive portal configuration 1 178
• Dws 3160 series gigabit ethernet unified switch cli reference guide 179
• To display the status of the captive portal configuration 1 179
• To display the status of the wireless interface 1 for the captive portal configuration 1 179
• Cp id displays the captive portal id cp name displays the captive portal name operational status displays whether the captive portal is enabled or disabled disable reason if the captive portal is disabled this field indicates the reason blocked status displays the blocked status which is blocked or not blocked 180
• Dws 3160 series gigabit ethernet unified switch cli reference guide 180
• In the above examples the following display parameters can be noticed 180
• To display the client s status which authenticated to the captive portal configuration 1 180
• To display the locales for the captive portal configuration 1 180
• 10 config captive_portal client deauthenticate 181
• Description 181
• Example 181
• Format 181
• Parameters 181
• Restrictions 181
• 11 show captive_portal client 182
• Description 182
• Dws 3160 series gigabit ethernet unified switch cli reference guide 182
• Format 182
• If no parameter is specified then a summary of the captive portal client connection will be displayed 182
• Optional enter the mac address of the wireless client here statistics optional specifies to display the statistics for a specific captive portal client 182
• Parameters 182
• Statistics 182
• This command is used to display information about the clients connected to the captive portals configured on the switch 182
• To deauthenticate a specific captive portal client 182
• To deauthenticate all captive portal clients from configuration 1 182
• Dws 3160 series gigabit ethernet unified switch cli reference guide 183
• Example 183
• Restrictions 183
• To display the captive portal client connection summary 183
• To display the client connection details for a specific connected captive portal user 183
• To display the client connection statistics for a specific captive portal user 183
• 12 show captive_portal interface client 184
• Description 184
• Example 184
• Format 184
• Parameters 184
• Restrictions 184
• Dws 3160 series gigabit ethernet unified switch cli reference guide 185
• To display detailed information for captive portal users connected to a specific interface 185
• 13 show captive_portal configuration client 186
• Description 186
• Dws 3160 series gigabit ethernet unified switch cli reference guide 186
• Example 186
• Format 186
• Parameters 186
• Restrictions 186
• Show captive_portal configuration client 186
• This command is used to display the clients authenticated to all captive portal configurations on the switch 186
• To display the clients authenticated to all captive portal configurations on the switch 186
• 14 show captive_portal interface configuration 187
• 15 show captive_portal interface capability 187
• Description 187
• Dws 3160 series gigabit ethernet unified switch cli reference guide 187
• Example 187
• Format 187
• Optional enter the captive portal configuration id used here if this variable is not 187
• Parameters 187
• Restrictions 187
• Specified all captive portal configurations are displayed 187
• This command is used to display all the captive portal eligible interfaces or the interface capabilities for a specific captive portal interface 187
• This command is used to display the interface configuration assignments for all captive portal configurations or a specific configuration 187
• To display the interface configuration assignments for a specific captive portal configuration 187
• To display the interface configuration assignments for all captive portal configurations 187
• Dws 3160 series gigabit ethernet unified switch cli reference guide 188
• Enter the physical portlist used here 188
• Enter the wireless network id used here 188
• Example 188
• Format 188
• Parameters 188
• Phy_port optional specifies to display the client information on the physical port s 188
• Restrictions 188
• To display all capable captive portal interfaces 188
• Wireless_network optional specifies to display the client information on the wireless network 188
• 16 create captive_portal user 190
• 17 delete captive_portal user 190
• Description 190
• Example 190
• Format 190
• Parameters 190
• Restrictions 190
• 18 config captive_portal user 191
• Description 191
• Example 191
• Format 191
• Parameters 191
• Restrictions 191
• Example 192
• Restrictions 192
• 19 show captive_portal user 193
• Description 193
• Dws 3160 series gigabit ethernet unified switch cli reference guide 193
• Format 193
• Optional enter the user id used here this value must be between 1 and 128 193
• Parameters 193
• This command is used to display all configured users or a specific user in the captive portal local user database on the switch 193
• To configure the maximum bandwidth up value for a captive portal user 193
• To configure the password for a captive portal user 193
• To configure the session timeout value for a captive portal user 193
• 20 create captive_portal user group 194
• Description 194
• Dws 3160 series gigabit ethernet unified switch cli reference guide 194
• Example 194
• Format 194
• Restrictions 194
• This command is used to create a captive portal user group 194
• To display the information of all captive portal users 194
• To display the information of captive portal user 1 194
• 21 delete captive_portal user group 195
• Description 195
• Example 195
• Format 195
• Parameters 195
• Restrictions 195
• 22 config captive_portal user group 196
• 23 show captive_portal user group 196
• Description 196
• Example 196
• Format 196
• Parameters 196
• Restrictions 196
• Between 1 and 10 197
• Dws 3160 series gigabit ethernet unified switch cli reference guide 197
• Example 197
• If no parameter is specified then all the user groups will be displayed 197
• Optional enter the captive portal user group id used here this value must be 197
• Parameters 197
• Restrictions 197
• To display a specific user group in the captive portal local user group database 197
• To display all the user groups in the captive portal local user group database 197
• 1 enable command logging 198
• 2 disable command logging 198
• Chapter 16 command logging command list 198
• Description 198
• Example 198
• Format 198
• Parameters 198
• Restrictions 198
• 3 show command logging 199
• Description 199
• Example 199
• Format 199
• Parameters 199
• Restrictions 199
• 1 create authentication guest_vlan 200
• Chapter 17 compound authentication command list 200
• Description 200
• Example 200
• Format 200
• Parameters 200
• Restrictions 200
• 2 delete authentication guest_vlan 201
• 3 config authentication guest_vlan 201
• Description 201
• Example 201
• Format 201
• Parameters 201
• Restrictions 201
• 4 config authentication ports 202
• Description 202
• Example 202
• Format 202
• Parameters 202
• Restrictions 202
• 5 show authentication guest_vlan 203
• Description 203
• Example 203
• Format 203
• Parameters 203
• Restrictions 203
• 6 show authentication ports 204
• Description 204
• Example 204
• Format 204
• Parameters 204
• Restrictions 204
• 7 enable authorization 205
• Description 205
• Dws 3160 series gigabit ethernet unified switch cli reference guide 205
• Enable authorization attributes 205
• Example 205
• Format 205
• Only administrators operators and power users can issue this command 205
• Parameters 205
• Restrictions 205
• This command is used to enable authorization 205
• To enable the authorization global state 205
• 8 disable authorization 206
• 9 show authorization 206
• Description 206
• Example 206
• Format 206
• Parameters 206
• Restrictions 206
• 10 config authentication server failover 207
• 11 show authentication 207
• Description 207
• Example 207
• Format 207
• Parameters 207
• Restrictions 207
• Dws 3160 series gigabit ethernet unified switch cli reference guide 208
• Example 208
• Format 208
• Parameters 208
• Restrictions 208
• Show authentication 208
• To display the global authentication configuration 208
• 1 show config 209
• Chapter 18 configuration command list 209
• Description 209
• Format 209
• Parameters 209
• Cannot contain the character the filter string is case sensitive this value can be up to 80 characters long include includes lines that contain the specified filter string exclude excludes lines that contain the specified filter string begin the first line that contains the specified filter string will be the first line of the output 210
• Dws 3160 series gigabit ethernet unified switch cli reference guide 210
• Example 210
• Level setting regarding stp is not displayed the lower level setting will only be displayed when the higher level setting is enabled 210
• Modified display only the commands which are not from the reset default setting current_config specifies the current configuration boot_up specifies the list of the boot up configuration file specifies that the unit can display the specified configuration file 210
• Only administrators can issue this command 210
• Optional a filter string is enclosed by symbol thus the filter string itself 210
• Restrictions 210
• The following example illustrates how the special filters effective affect the configuration display 210
• The following example illustrates how the special filters modified affect the configuration display 210
• The pathname specifies an absolute pathname on the device file system if pathname is not specified the boot up configuration is implied this name can be up to 64 characters long 210
• 2 config configuration 211
• Boot_up active 211
• Description 211
• Dws 3160 series gigabit ethernet unified switch cli reference guide 211
• Example 211
• Format 211
• Only administrators can issue this command 211
• Parameters 211
• Restrictions 211
• Specifies a configuration file on the device file system boot_up optional specifies it as a boot up file active optional specifies to apply the configuration 211
• This command is used to select a configuration file as the next boot up configuration or to apply a specific configuration to the system this command is required when multiple configuration files are supported 211
• To configure the switch s configuration file as boot up 211
• 3 save 212
• 4 show boot_file 212
• Description 212
• Example 212
• Format 212
• Parameters 212
• Restrictions 212
• Example 213
• Format 213
• Parameters 213
• Restrictions 213
• Chapter 19 connectivity fault management command list 214
• 1 create cfm md 215
• 2 config cfm md 215
• Description 215
• Example 215
• Format 215
• Parameters 215
• Restrictions 215
• 3 create cfm ma 216
• Description 216
• Example 216
• Format 216
• Parameters 216
• Restrictions 216
• 4 config cfm ma 217
• Description 217
• Example 217
• Format 217
• Parameters 217
• Restrictions 217
• 5 create cfm mep 218
• Description 218
• Example 218
• Restrictions 218
• 6 config cfm mep 219
• Description 219
• Example 219
• Format 219
• Parameters 219
• Restrictions 219
• Format 220
• Parameters 220
• 7 delete cfm mep 221
• Description 221
• Example 221
• Format 221
• Parameters 221
• Restrictions 221
• 8 delete cfm ma 222
• Description 222
• Example 222
• Format 222
• Parameters 222
• Restrictions 222
• 10 enable cfm 223
• 9 delete cfm md 223
• Description 223
• Example 223
• Format 223
• Parameters 223
• Restrictions 223
• 11 disable cfm 224
• Description 224
• Example 224
• Format 224
• Parameters 224
• Restrictions 224
• 12 config cfm ports 225
• 13 show cfm ports 225
• Description 225
• Example 225
• Format 225
• Parameters 225
• Restrictions 225
• 14 show cfm 226
• Description 226
• Example 226
• Format 226
• Parameters 226
• Restrictions 226
• Dws 3160 series gigabit ethernet unified switch cli reference guide 227
• Example 227
• Restrictions 227
• To display the cfm configuration 227
• 15 show cfm fault 228
• Characters long 228
• Description 228
• Dws 3160 series gigabit ethernet unified switch cli reference guide 228
• Enter the maintenance domain name used here this name can be up to 22 228
• Format 228
• Md optional specifies the maintenance domain name 228
• Parameters 228
• This command is used to display all the fault conditions detected by the meps contained in the specified ma or md this display provides the overview of the fault status by meps 228
• 16 show cfm port 229
• Description 229
• Example 229
• Format 229
• Parameters 229
• Restrictions 229
• 17 cfm loopback 230
• Description 230
• Example 230
• Format 230
• Parameters 230
• 18 cfm linktrace 231
• Description 231
• Example 231
• Format 231
• Parameters 231
• Restrictions 231
• 19 show cfm linktrace 232
• Description 232
• Example 232
• Format 232
• Parameters 232
• Restrictions 232
• Between 1 and 4294967295 233
• Dws 3160 series gigabit ethernet unified switch cli reference guide 233
• Enter the maintenance association index value here this value must 233
• Enter the transaction id used here 233
• Example 233
• Ma_index optional specifies the maintenance association index 233
• Restrictions 233
• To display the link trace reply when the all mps reply ltrs function is disabled 233
• To display the link trace reply when the all mps reply ltrs function is enabled 233
• Trans_id optional specifies the identifier of the transaction displayed 233
• 20 delete cfm linktrace 234
• 21 show cfm mipccm 234
• Description 234
• Example 234
• Format 234
• Parameters 234
• Restrictions 234
• 22 config cfm mp_ltr_all 235
• Description 235
• Example 235
• Format 235
• Parameters 235
• Restrictions 235
• 23 show cfm mp_ltr_all 236
• 24 show cfm remote_mep 236
• Description 236
• Example 236
• Format 236
• Parameters 236
• Restrictions 236
• 25 show cfm pkt_cnt 237
• Description 237
• Example 237
• Format 237
• Restrictions 237
• Dws 3160 series gigabit ethernet unified switch cli reference guide 238
• Enter the list of ports used for this configuration here 238
• Example 238
• Parameters 238
• Ports optional specifies the port counters to display if not specified all ports will be 238
• Restrictions 238
• Rx optional specifies to display the rx counter tx optional specifies to display the tx counter if not specified both of them will be displayed rx optional specifies to display the rx counter tx optional specifies to display the tx counter if not specified both of them will be displayed ccm optional specifies the ccm rx counters 238
• To display the cfm packet s rx tx counters 238
• 26 clear cfm pkt_cnt 239
• Description 239
• Example 239
• Format 239
• Parameters 239
• Restrictions 239
• Dws 3160 series gigabit ethernet unified switch cli reference guide 240
• 1 config cfm ais 241
• Chapter 20 connectivity fault management cfm extension command list 241
• Description 241
• Format 241
• Parameters 241
• 2 config cfm lock 242
• Description 242
• Example 242
• Format 242
• Parameters 242
• Restrictions 242
• 3 cfm lock md 243
• Description 243
• Example 243
• Format 243
• Parameters 243
• Restrictions 243
• 4 config cfm ccm_fwd 244
• Description 244
• Example 244
• Format 244
• Parameters 244
• Restrictions 244
• 5 show cfm ccm_fwd 245
• Description 245
• Example 245
• Format 245
• Parameters 245
• Restrictions 245
• 1 create cpu access_profile 246
• Chapter 21 cpu interface filtering command list 246
• Description 246
• Format 246
• Parameters 247
• Example 248
• Restrictions 248
• 2 delete cpu access_profile 249
• 3 config cpu access_profile 249
• Description 249
• Dws 3160 series gigabit ethernet unified switch cli reference guide 249
• Enter the profile id value here this value must be between 1 and 5 all specifies that all the access list profiles will be deleted 249
• Example 249
• Format 249
• Only administrators operators and power users can issue this command 249
• Parameters 249
• Profile_id specifies the index of access list profile 249
• Restrictions 249
• This command is used to configure cpu access list entry 249
• This command is used to delete cpu access list rules 249
• To delete cpu access list rules 249
• Format 250
• Parameters 250
• 4 enable cpu interface filtering 253
• Description 253
• Example 253
• Format 253
• Parameters 253
• Restrictions 253
• 5 disable cpu interface filtering 254
• 6 show cpu access_profile 254
• Description 254
• Example 254
• Format 254
• Parameters 254
• Restrictions 254
• Dws 3160 series gigabit ethernet unified switch cli reference guide 255
• Dws 3160 series gigabit ethernet unified switch cli reference guide 256
• 1 debug error_log 257
• Chapter 22 debug software command list 257
• Description 257
• Example 257
• Format 257
• Parameters 257
• Restrictions 257
• 2 debug buffer 258
• Description 258
• Dws 3160 series gigabit ethernet unified switch cli reference guide 258
• This command is use to display the debug buffer s state or dump clear or upload the debug buffer to a tftp server 258
• To clear the error log 258
• To upload the error log to tftp server 258
• Example 259
• Format 259
• Parameters 259
• Restrictions 259
• 3 debug output 260
• 4 debug config error_reboot 260
• Description 260
• Example 260
• Format 260
• Parameters 260
• Restrictions 260
• 5 debug config state 261
• 6 debug show arpunresolved_list 261
• Description 261
• Example 261
• Format 261
• Parameters 261
• Restrictions 261
• 7 debug show error_reboot state 262
• Description 262
• Example 262
• Format 262
• Parameters 262
• Restrictions 262
• 8 debug show status 263
• Description 263
• Example 263
• Format 263
• Parameters 263
• Restrictions 263
• 9 debug address_binding 264
• Description 264
• Example 264
• Format 264
• Parameters 264
• Restrictions 264
• 10 no debug address_binding 265
• 11 debug stp config ports 265
• Description 265
• Example 265
• Format 265
• Parameters 265
• Restrictions 265
• 12 debug stp show information 266
• Description 266
• Example 266
• Format 266
• Parameters 266
• Restrictions 266
• 13 debug stp show flag 267
• Description 267
• Dws 3160 series gigabit ethernet unified switch cli reference guide 267
• Example 267
• Format 267
• If no parameter is specified all ports on the switch will be displayed 267
• Only administrators can issue this command 267
• Optional enter the list of port used for this configuration here 267
• Parameters 267
• Ports optional specifies the stp ports to display 267
• Restrictions 267
• This command used to display the stp debug level on specified ports 267
• To display the debug stp levels on all ports 267
• 14 debug stp show counter 268
• Description 268
• Dws 3160 series gigabit ethernet unified switch cli reference guide 268
• Enter the list of port used for this configuration here all display all port s counters 268
• Format 268
• If no parameter is specified display the global counters 268
• Parameters 268
• Ports optional specifies the stp ports for display 268
• This command used to display the stp counters 268
• 15 debug stp clear counter 269
• Description 269
• Dws 3160 series gigabit ethernet unified switch cli reference guide 269
• Enter the list of port used for this configuration here all clears all port counters 269
• Example 269
• Format 269
• Only administrators can issue this command 269
• Parameters 269
• Ports specifies the port range 269
• Restrictions 269
• This command used to clear the stp counters 269
• To display the stp counters for port 9 269
• 16 debug stp state 270
• Description 270
• Example 270
• Format 270
• Parameters 270
• Restrictions 270
• 1 config dhcp_local_relay 272
• Chapter 23 dhcp local relay command list 272
• Description 272
• Example 272
• Format 272
• Parameters 272
• Restrictions 272
• 2 config dhcp_local_relay vlan vlanid 273
• 3 enable dhcp_local_relay 273
• Description 273
• Example 273
• Format 273
• Parameters 273
• Restrictions 273
• 4 disable dhcp_local_relay 274
• 5 show dhcp_local_relay 274
• Description 274
• Example 274
• Format 274
• Parameters 274
• Restrictions 274
• Example 275
• Restrictions 275
• 1 config dhcp_relay 276
• Chapter 24 dhcp relay command list 276
• Description 276
• Format 276
• Parameters 276
• Restrictions 276
• 2 config dhcp_relay add 277
• 3 config dhcp_relay delete 277
• Description 277
• Example 277
• Format 277
• Parameters 277
• Restrictions 277
• 4 config dhcp_relay option_82 check 278
• Description 278
• Example 278
• Format 278
• Parameters 278
• Restrictions 278
• 5 config dhcp_relay option_82 policy 279
• 6 config dhcp_relay option_82 remote_id 279
• Description 279
• Example 279
• Format 279
• Parameters 279
• Restrictions 279
• 7 config dhcp_relay option_82 state 280
• Description 280
• Example 280
• Format 280
• Parameters 280
• Restrictions 280
• 8 enable dhcp_relay 281
• 9 disable dhcp_relay 281
• Description 281
• Example 281
• Format 281
• Parameters 281
• Restrictions 281
• 10 show dhcp_relay 282
• Description 282
• Example 282
• Format 282
• Parameters 282
• Restrictions 282
• 11 config dhcp_relay option_60 283
• Description 283
• Dws 3160 series gigabit ethernet unified switch cli reference guide 283
• If the relay servers are determined based on option 60 or option 61 then per ipif configured servers will be ignored 283
• This command is use to decides whether dhcp relay will process the dhcp option 60 or not 283
• To display dhcp relay configuration 283
• When option 60 is enabled if the packet does not have option 60 then the relay servers cannot be determined based on option 60 the relay servers will be determined based on either option 61 or per ipif configured servers 283
• 12 config dhcp_relay option_60 add 284
• Description 284
• Example 284
• Format 284
• Parameters 284
• Restrictions 284
• 13 config dhcp_relay option_60 default 285
• Description 285
• Example 285
• Format 285
• Parameters 285
• Restrictions 285
• 14 config dhcp_relay option_60 delete 286
• 15 show dhcp_relay option_60 286
• Description 286
• Example 286
• Format 286
• Parameters 286
• Restrictions 286
• 16 config dhcp_relay option_61 287
• Description 287
• Example 287
• Format 287
• Parameters 287
• Restrictions 287
• 17 config dhcp_relay option_61 add 288
• Description 288
• Example 288
• Format 288
• Parameters 288
• Restrictions 288
• 18 config dhcp_relay option_61 default 289
• 19 config dhcp_relay option_61 delete 289
• Description 289
• Example 289
• Format 289
• Parameters 289
• Restrictions 289
• 20 show dhcp_relay option_61 290
• Description 290
• Example 290
• Format 290
• Parameters 290
• Restrictions 290
• Dws 3160 series gigabit ethernet unified switch cli reference guide 291
• 1 config filter dhcp_server 292
• Chapter 25 dhcp server screening command list 292
• Description 292
• Format 292
• Parameters 292
• 2 show filter dhcp_server 293
• Description 293
• Example 293
• Format 293
• Parameters 293
• Restrictions 293
• Dws 3160 series gigabit ethernet unified switch cli reference guide 294
• Example 294
• Restrictions 294
• To display the dhcp server client filter list created on the switch 294
• 1 install dlms activation_code 295
• Chapter 26 d link license management system dlms command list 295
• Description 295
• Example 295
• Format 295
• Parameters 295
• Restrictions 295
• 2 show dlms license 296
• Description 296
• Example 296
• Format 296
• Parameters 296
• Restrictions 296
• 1 enable erps 297
• Chapter 27 ethernet ring protection switching erps command list 297
• Description 297
• Example 297
• Format 297
• Parameters 297
• Restrictions 297
• 2 disable erps 298
• 3 create erps raps_vlan 298
• Description 298
• Example 298
• Format 298
• Parameters 298
• Restrictions 298
• 4 delete erps raps_vlan 299
• Description 299
• Example 299
• Format 299
• Parameters 299
• Restrictions 299
• 5 config erps raps_vlan 300
• Description 300
• Format 301
• Parameters 301
• Example 302
• Restrictions 302
• Dws 3160 series gigabit ethernet unified switch cli reference guide 303
• To configure a sub ring connected to another ring 303
• To configure the protected vlan for a specific r aps vlan 303
• To configure the ring state of the erps 303
• To configure the rpl port or the rpl owner for a specific r aps vlan 303
• To configure the state of topology change propagation 303
• 6 config erps log 304
• 7 config erps trap 304
• Description 304
• Example 304
• Format 304
• Parameters 304
• Restrictions 304
• 8 show erps 305
• Description 305
• Example 305
• Format 305
• Parameters 305
• Restrictions 305
• Dws 3160 series gigabit ethernet unified switch cli reference guide 306
• To display erps information of r aps vlan 3 306
• 1 config filter netbios 307
• 2 show filter netbios 307
• Chapter 28 filter command list 307
• Description 307
• Example 307
• Format 307
• Parameters 307
• Restrictions 307
• 3 config filter extensive_netbios 308
• Description 308
• Example 308
• Format 308
• Parameters 308
• Restrictions 308
• 4 show filter extensive_netbios 309
• Description 309
• Example 309
• Format 309
• Parameters 309
• Restrictions 309
• 1 create fdb 310
• Chapter 29 filter database fdb command list 310
• Description 310
• Example 310
• Format 310
• Parameters 310
• Restrictions 310
• 2 create fdb vlanid 311
• Description 311
• Example 311
• Format 311
• Parameters 311
• Restrictions 311
• 3 create multicast_fdb 312
• 4 config multicast_fdb 312
• Description 312
• Example 312
• Format 312
• Parameters 312
• Restrictions 312
• 5 config fdb aging_time 313
• Description 313
• Example 313
• Format 313
• Parameters 313
• Restrictions 313
• 6 config multicast vlan_filtering_mode 314
• 7 delete fdb 314
• Description 314
• Example 314
• Format 314
• Parameters 314
• Restrictions 314
• 8 clear fdb 315
• Description 315
• Example 315
• Format 315
• Parameters 315
• Restrictions 315
• 9 show multicast_fdb 316
• Description 316
• Example 316
• Format 316
• Parameters 316
• Restrictions 316
• 10 show fdb 317
• Description 317
• Example 317
• Format 317
• Parameters 317
• Restrictions 317
• 11 show multicast vlan_filtering_mode 318
• Description 318
• Example 318
• Format 318
• Parameters 318
• Restrictions 318
• Dws 3160 series gigabit ethernet unified switch cli reference guide 319
• 1 show storage_media_info 320
• Chapter 30 flash file system ffs command list 320
• Description 320
• Example 320
• Format 320
• Parameters 320
• Restrictions 320
• 2 change drive 321
• Description 321
• Example 321
• Format 321
• Parameters 321
• Restrictions 321
• Description 322
• Example 322
• Format 322
• Parameters 322
• Restrictions 322
• Description 323
• Example 323
• Format 323
• Parameters 323
• Restrictions 323
• 7 rename 324
• Characters long 324
• Description 324
• Dws 3160 series gigabit ethernet unified switch cli reference guide 324
• Example 324
• Format 324
• Only administrators and operators can issue this command 324
• Parameters 324
• Restrictions 324
• Specified the file in path form to be renamed this name can be up to 64 324
• Specified the new name of the file this name can be up to 64 characters long 324
• This command is used to rename a file this command is used to rename a file in the file system the pathname specifies the file in path form to be renamed and the filename specifies the new filename if the pathname is not a full path then it refers to a path under the current directory for the drive the renamed file will stay in the same directory 324
• To rename a file 324
• Description 325
• Example 325
• Format 325
• Parameters 325
• Restrictions 325
• 9 erase 326
• Description 326
• Dws 3160 series gigabit ethernet unified switch cli reference guide 326
• Format 326
• System will prompt if the target file is a fw or configuration whose type is boot up 326
• This command is used to delete a file stored in the file system 326
• Dws 3160 series gigabit ethernet unified switch cli reference guide 327
• Example 327
• Only administrators and operators can issue this command 327
• Parameters 327
• Related to the current directory this name can be up to 64 characters long 327
• Restrictions 327
• Specifies the file to be deleted if it is specified in the associated form then it is 327
• To erase a file 327
• 10 move 328
• 11 copy 328
• Description 328
• Example 328
• Format 328
• Parameters 328
• Restrictions 328
• 12 format 329
• Description 329
• Example 329
• Format 329
• Parameters 329
• Restrictions 329
• Dws 3160 series gigabit ethernet unified switch cli reference guide 330
• 1 config gratuitous_arp send ipif_status_up 331
• 2 config gratuitous_arp send dup_ip_detected 331
• Chapter 31 gratuitous arp command list 331
• Description 331
• Example 331
• Format 331
• Parameters 331
• Restrictions 331
• 3 config gratuitous_arp learning 332
• Description 332
• Example 332
• Format 332
• Parameters 332
• Restrictions 332
• 4 config gratuitous_arp send periodically 333
• Description 333
• Example 333
• Format 333
• Parameters 333
• Restrictions 333
• 5 enable gratuitous_arp 334
• 6 disable gratuitous_arp 334
• Description 334
• Example 334
• Format 334
• Parameters 334
• Restrictions 334
• 7 show gratuitous_arp 335
• Description 335
• Example 335
• Format 335
• Parameters 335
• Restrictions 335
• Dws 3160 series gigabit ethernet unified switch cli reference guide 336
• 1 config igmp_snooping 337
• Chapter 32 igmp snooping command list 337
• Description 337
• Format 337
• Parameters 337
• 2 config igmp_snooping rate_limit 338
• Description 338
• Example 338
• Format 338
• Parameters 338
• Restrictions 338
• 3 config igmp_snooping querier 339
• Description 339
• Example 339
• Format 339
• Parameters 339
• Restrictions 339
• Example 340
• Restrictions 340
• 4 config router_ports 341
• 5 config router_ports_forbidden 341
• Description 341
• Example 341
• Format 341
• Parameters 341
• Restrictions 341
• 6 enable igmp_snooping 342
• Description 342
• Example 342
• Format 342
• Parameters 342
• Restrictions 342
• 7 disable igmp_snooping 343
• 8 create igmp_snooping static_group 343
• Description 343
• Example 343
• Format 343
• Parameters 343
• Restrictions 343
• 9 delete igmp_snooping static_group 344
• Description 344
• Example 344
• Format 344
• Parameters 344
• Restrictions 344
• 10 config igmp_snooping static_group 345
• Description 345
• Example 345
• Format 345
• Parameters 345
• Restrictions 345
• 11 show igmp_snooping static_group 346
• 12 config igmp_snooping data_driven_learning 346
• Description 346
• Example 346
• Format 346
• Parameters 346
• Restrictions 346
• Example 347
• Format 347
• Parameters 347
• Restrictions 347
• 13 config igmp_snooping data_driven_learning max_learned_entry 348
• 14 clear igmp_snooping data_driven_group 348
• Description 348
• Example 348
• Format 348
• Parameters 348
• Restrictions 348
• 15 show igmp_snooping 349
• Description 349
• Example 349
• Format 349
• Parameters 349
• Restrictions 349
• 16 show igmp_snooping rate_limit 350
• Description 350
• Dws 3160 series gigabit ethernet unified switch cli reference guide 350
• Enter the range of ports here 350
• Enter the vlan id list here 350
• Example 350
• Format 350
• Parameters 350
• Ports specifies the port range 350
• Restrictions 350
• This command is used to display the igmp snooping rate limit setting 350
• To display igmp snooping 350
• Vlanid specifies the vlan range 350
• 17 show igmp_snooping group 351
• Description 351
• Example 351
• Format 351
• Parameters 351
• Restrictions 351
• 18 show igmp_snooping forwarding 352
• Description 352
• Example 352
• Format 352
• Parameters 352
• Restrictions 352
• 19 show router_ports 353
• Description 353
• Example 353
• Format 353
• Parameters 353
• Restrictions 353
• 20 show igmp_snooping statistics counter 354
• Description 354
• Dws 3160 series gigabit ethernet unified switch cli reference guide 354
• Enter the list of port to be displayed here 354
• Enter the vlan id list here 354
• Enter the vlan name here 354
• Format 354
• Parameters 354
• Ports specifies a list of ports to be displayed 354
• Restrictions 354
• This command is used to display the statistics counter for igmp protocol packets that are received by the switch since igmp snooping was enabled 354
• Vlan specifies a vlan to be displayed 354
• Vlanid specifies a list of vlans to be displayed 354
• Dws 3160 series gigabit ethernet unified switch cli reference guide 355
• Example 355
• To display the igmp snooping statistics counter 355
• To display the igmp snooping statistics counter for a port 355
• 21 clear igmp_snooping statistics counter 356
• Clear igmp_snooping statistics counter 356
• Description 356
• Dws 3160 series gigabit ethernet unified switch cli reference guide 356
• Example 356
• Format 356
• Only administrators operators and power users can issue this command 356
• Parameters 356
• Restrictions 356
• This command is used to clear the igmp snooping statistics counter 356
• To clear the igmp snooping statistics counter 356
• 1 create igmp_snooping multicast_vlan 358
• Chapter 33 igmp snooping multicast ism vlan command list 358
• Description 358
• Format 358
• Parameters 358
• 2 config igmp_snooping multicast_vlan 359
• Description 359
• Example 359
• Format 359
• Parameters 359
• Restrictions 359
• 3 create igmp_snooping multicast_vlan_group_profile 360
• Description 360
• Example 360
• Format 360
• Parameters 360
• Restrictions 360
• 4 config igmp_snooping multicast_vlan_group_profile 361
• Description 361
• Example 361
• Format 361
• Parameters 361
• Restrictions 361
• 5 delete igmp_snooping multicast_vlan_group_profile 362
• 6 show igmp_snooping multicast_vlan_group_profile 362
• Description 362
• Example 362
• Format 362
• Parameters 362
• Restrictions 362
• 7 config igmp_snooping multicast_vlan_group 363
• Description 363
• Example 363
• Format 363
• Parameters 363
• Restrictions 363
• 8 show igmp_snooping multicast_vlan_group 364
• Description 364
• Example 364
• Format 364
• Parameters 364
• Restrictions 364
• 10 enable igmp_snooping multicast_vlan 365
• 9 delete igmp_snooping multicast_vlan 365
• Description 365
• Example 365
• Format 365
• Parameters 365
• Restrictions 365
• 11 disable igmp_snooping multicast_vlan 366
• Description 366
• Example 366
• Format 366
• Parameters 366
• Restrictions 366
• 12 config igmp_snooping multicast_vlan forward_unmatched 367
• 13 show igmp_snooping multicast_vlan 367
• Description 367
• Example 367
• Format 367
• Parameters 367
• Restrictions 367
• Dws 3160 series gigabit ethernet unified switch cli reference guide 368
• Example 368
• Restrictions 368
• To display all igmp snooping multicast vlan entries 368
• 1 config address_binding ip_mac 369
• Chapter 34 ip mac port binding impb command list 369
• Description 369
• Format 369
• Parameters 369
• 2 create address_binding ip_mac 370
• Description 370
• Example 370
• Format 370
• Parameters 370
• Restrictions 370
• 3 delete address_binding blocked 371
• Description 371
• Example 371
• Format 371
• Parameters 371
• Restrictions 371
• 4 delete address_binding ip_mac 372
• 5 config address_binding ip_mac 372
• Description 372
• Example 372
• Format 372
• Parameters 372
• Restrictions 372
• 6 show address_binding 373
• Description 373
• Example 373
• Format 373
• Parameters 373
• Restrictions 373
• 7 show address_binding blocked 374
• Description 374
• Dws 3160 series gigabit ethernet unified switch cli reference guide 374
• Example 374
• Format 374
• This command is used to display the blocked mac entries in the address binding database 374
• To display the impb global configuration 374
• To display the impb ports 374
• 8 show address_binding ip_mac 375
• Description 375
• Example 375
• Format 375
• Parameters 375
• Restrictions 375
• 9 enable address_binding dhcp_snoop 376
• Description 376
• Example 376
• Parameters 376
• Restrictions 376
• 10 disable address_binding dhcp_snoop 377
• Description 377
• Example 377
• Format 377
• Parameters 377
• Restrictions 377
• 11 clear address_binding dhcp_snoop binding_entry ports 378
• 12 show address_binding dhcp_snoop 378
• Description 378
• Example 378
• Format 378
• Parameters 378
• Restrictions 378
• Dws 3160 series gigabit ethernet unified switch cli reference guide 379
• Enter a list of ports used here 379
• Example 379
• If no parameters are specified display dhcp snooping displays the enable disable state 379
• Max_entry optional to display the maximum number of entries per port 379
• Parameters 379
• Ports specifies the ports used for this configuration 379
• Restrictions 379
• To display dhcp snooping maximum entry configuration 379
• To display the dhcp snooping state 379
• 13 show address_binding dhcp_snoop binding_entry 380
• 14 config address_binding dhcp_snoop max_entry 380
• Description 380
• Example 380
• Format 380
• Parameters 380
• Restrictions 380
• 15 enable address_binding trap_log 381
• Description 381
• Example 381
• Format 381
• Parameters 381
• Restrictions 381
• 16 disable address_binding trap_log 382
• 17 config address_binding recover_learning 382
• Description 382
• Example 382
• Format 382
• Parameters 382
• Restrictions 382
• Example 383
• Restrictions 383
• 1 create ipv6 neighbor_cache 384
• Chapter 35 ipv6 neighbor discover command list 384
• Description 384
• Example 384
• Format 384
• Parameters 384
• Restrictions 384
• 2 delete ipv6 neighbor_cache 385
• 3 show ipv6 neighbor_cache 385
• Description 385
• Example 385
• Format 385
• Parameters 385
• Restrictions 385
• 4 config ipv6 nd ns retrans_time 386
• Description 386
• Example 386
• Format 386
• Parameters 386
• Restrictions 386
• 5 show ipv6 nd 387
• Description 387
• Example 387
• Format 387
• Parameters 387
• Restrictions 387
• 1 create ipv6route 388
• Chapter 36 ipv6 route command list 388
• Description 388
• Example 388
• Format 388
• Parameters 388
• Restrictions 388
• 2 delete ipv6route 389
• 3 show ipv6route 389
• Description 389
• Example 389
• Format 389
• Parameters 389
• Restrictions 389
• Display all the ipv6 routes 390
• Dws 3160 series gigabit ethernet unified switch cli reference guide 390
• Example 390
• 1 enable jumbo_frame 391
• 2 disable jumbo_frame 391
• Chapter 37 jumbo frame command list 391
• Description 391
• Example 391
• Format 391
• Parameters 391
• Restrictions 391
• 3 show jumbo_frame 392
• Description 392
• Example 392
• Format 392
• Parameters 392
• Restrictions 392
• 1 create link_aggregation group_id 393
• Chapter 38 link aggregation command list 393
• Description 393
• Example 393
• Format 393
• Parameters 393
• Restrictions 393
• 2 delete link_aggregation group_id 394
• 3 config link_aggregation 394
• Description 394
• Example 394
• Format 394
• Parameters 394
• Restrictions 394
• 4 config link_aggregation algorithm 395
• Description 395
• Example 395
• Format 395
• Parameters 395
• Restrictions 395
• 5 show link_aggregation 396
• Description 396
• Example 396
• Format 396
• Parameters 396
• Restrictions 396
• Dws 3160 series gigabit ethernet unified switch cli reference guide 397
• Link aggregation group disabled 397
• Link aggregation group enable and no member linkup 397
• 6 config lacp_port 398
• Description 398
• Example 398
• Format 398
• Parameters 398
• Restrictions 398
• 7 show lacp_port 399
• Description 399
• Dws 3160 series gigabit ethernet unified switch cli reference guide 399
• Enter the list of ports used for this configuration here 399
• Example 399
• Format 399
• If no parameter specified the system will display current lacp and all port status 399
• Lacp_port specified a range of ports to be configured 399
• Parameters 399
• Restrictions 399
• This command is used to display the current mode of lacp of the ports 399
• To display port lacp mode 399
• 1 enable lldp 400
• Chapter 39 link layer discovery protocol lldp command list 400
• Description 400
• Format 400
• Parameters 400
• 2 disable lldp 401
• 3 config lldp 401
• Description 401
• Example 401
• Format 401
• Parameters 401
• Restrictions 401
• 4 config lldp notification_interval 402
• Description 402
• Example 402
• Format 402
• Parameters 402
• Restrictions 402
• 5 config lldp ports 403
• Description 403
• Example 403
• Format 403
• Parameters 403
• Restrictions 403
• Example 405
• Restrictions 405
• Dws 3160 series gigabit ethernet unified switch cli reference guide 406
• To configure exclude the port and protocol vlan id tlv from the outbound lldp advertisements for all ports 406
• To configure exclude the protocol identity tlv from the outbound lldp advertisements for all ports 406
• To configure exclude the system name tlv from the outbound lldp advertisements for all ports 406
• To configure exclude the vlan name tlv from the outbound lldp advertisements for all ports 406
• To configure exclude the vlan nametlv from the outbound lldp advertisements for all ports 406
• To enable ports 1 2 for manage address entry 406
• 6 config lldp forward_ message 407
• 7 show lldp 407
• Config lldp forward_message enable disable 407
• Description 407
• Dws 3160 series gigabit ethernet unified switch cli reference guide 407
• Example 407
• Format 407
• Only administrators operators and power users can issue this command 407
• Parameters 407
• Restrictions 407
• This command is used to configure forwarding of lldp pdu packets when lldp is disabled 407
• This command is used to display the switch s general lldp configuration status 407
• To configure exclude the mac phy configuration status tlv from the outbound lldp advertisements for all ports 407
• To configure lldp to forward lldp pdus 407
• 8 show lldp mgt_addr 408
• Description 408
• Example 408
• Format 408
• Parameters 408
• Restrictions 408
• 9 show lldp ports 409
• Description 409
• Example 409
• Format 409
• Parameters 409
• Restrictions 409
• 10 show lldp local_ports 410
• Brief display the information in brief mode normal display the information in normal mode this is the default display mode detailed display the information in detailed mode 410
• Description 410
• Dws 3160 series gigabit ethernet unified switch cli reference guide 410
• Format 410
• Information for all ports will be displayed 410
• Mode brief normal detailed 410
• Mode optional specifies the display mode 410
• Optional specified a range of ports to be configured when port list is not specified 410
• Parameters 410
• Restrictions 410
• This command is used to display the per port information currently available for populating outbound lldp advertisements 410
• Dws 3160 series gigabit ethernet unified switch cli reference guide 411
• Example 411
• To display outbound lldp advertisements for port 1 in detailed mode port description on the display should use the same value as ifdescr 411
• 11 show lldp remote_ports 412
• Brief normal detailed 412
• Description 412
• Dws 3160 series gigabit ethernet unified switch cli reference guide 412
• Format 412
• This command is used to display the information learned from the neighbor parameters 412
• To display outbound lldp advertisements for port 1 in brief mode 412
• To display outbound lldp advertisements for port 1 in normal mode 412
• Brief optional display the information in brief mode normal display the information in normal mode this is the default display mode detailed display the information in detailed mode 413
• Dws 3160 series gigabit ethernet unified switch cli reference guide 413
• Example 413
• Information for all ports will be displayed 413
• Optional specified a range of ports to be configured when port list is not specified 413
• Parameters 413
• Restrictions 413
• To display remote table in brief mode 413
• To display remote table in normal mode 413
• Dws 3160 series gigabit ethernet unified switch cli reference guide 414
• To display remote table in detailed mode 414
• 12 show lldp statistics 415
• 13 show lldp statistics ports 415
• Description 415
• Example 415
• Format 415
• Parameters 415
• Restrictions 415
• Dws 3160 series gigabit ethernet unified switch cli reference guide 416
• Example 416
• To display statistics information of port 1 416
• 1 config loopdetect 417
• Chapter 40 loop back detection lbd command list 417
• Description 417
• Format 417
• Parameters 417
• Restrictions 417
• 2 config loopdetect ports 418
• 3 enable loopdetect 418
• Description 418
• Example 418
• Format 418
• Parameters 418
• Restrictions 418
• 4 disable loopdetect 419
• Description 419
• Example 419
• Format 419
• Parameters 419
• Restrictions 419
• 5 show loopdetect 420
• 6 show loopdetect ports 420
• Description 420
• Dws 3160 series gigabit ethernet unified switch cli reference guide 420
• Example 420
• Format 420
• Parameters 420
• Restrictions 420
• Show loopdetect 420
• This command is used to display the lbd global configuration 420
• This command is used to display the lbd per port configuration 420
• To display the lbd global settings 420
• 7 config loopdetect trap 421
• Config loopdetect trap none loop_detected loop_cleared both 421
• Description 421
• Dws 3160 series gigabit ethernet unified switch cli reference guide 421
• Enter the list of port to be configured here 421
• Example 421
• Format 421
• If no port is specified the configuration for all ports will be displayed 421
• None there is no trap in the lbd function loop_detected trap will only be sent when the loop condition is detected loop_cleared trap will only be sent when the loop condition is cleared both trap will either be sent when the loop condition is detected or cleared 421
• Parameters 421
• Ports specifies the range of member ports that will display the lbd settings 421
• Restrictions 421
• This command is used to configure the trap modes for lbd 421
• To display the lbd settings on ports 1 9 421
• 8 config loopdetect log 422
• Description 422
• Example 422
• Format 422
• Parameters 422
• Restrictions 422
• 1 enable mac_notification 423
• 2 disable mac_notification 423
• Chapter 41 mac notification command list 423
• Description 423
• Example 423
• Format 423
• Parameters 423
• Restrictions 423
• 3 config mac_notification 424
• Description 424
• Example 424
• Format 424
• Parameters 424
• Restrictions 424
• 4 config mac_notification ports 425
• 5 show mac_notification 425
• Description 425
• Example 425
• Format 425
• Parameters 425
• Restrictions 425
• 6 show mac_notification ports 426
• Description 426
• Example 426
• Format 426
• Parameters 426
• Restrictions 426
• Dws 3160 series gigabit ethernet unified switch cli reference guide 427
• 1 enable mac_based_access_control 428
• Chapter 42 mac based access control command list 428
• Description 428
• Format 428
• Parameters 428
• Restrictions 428
• 2 disable mac_based_access_control 429
• 3 config mac_based_access_control password 429
• Description 429
• Example 429
• Format 429
• Parameters 429
• Restrictions 429
• 4 config mac_based_access_control method 430
• Description 430
• Example 430
• Format 430
• Parameters 430
• Restrictions 430
• 5 config mac_based_access_control guest_vlan 431
• 6 config mac_based_access_control ports 431
• Description 431
• Example 431
• Format 431
• Parameters 431
• Restrictions 431
• Format 432
• Parameters 432
• Restrictions 432
• 7 create mac_based_access_control 433
• Description 433
• Example 433
• Format 433
• Parameters 433
• Restrictions 433
• 8 delete mac_based_access_control 434
• 9 clear mac_based_access_control auth_state 434
• Description 434
• Example 434
• Format 434
• Parameters 434
• Restrictions 434
• 10 create mac_based_access_control_local 435
• Description 435
• Example 435
• Format 435
• Parameters 435
• Restrictions 435
• 11 config mac_based_access_control_local 436
• Description 436
• Example 436
• Format 436
• Parameters 436
• Restrictions 436
• 12 delete mac_based_access_control_local 437
• Description 437
• Example 437
• Format 437
• Parameters 437
• Restrictions 437
• 13 config mac_based_access_control authorization attributes 438
• Description 438
• Example 438
• Format 438
• Parameters 438
• Restrictions 438
• 14 show mac_based_access_control 439
• 15 show mac_based_access_control_local 439
• Description 439
• Example 439
• Format 439
• Parameters 439
• Restrictions 439
• 16 show mac_based_access_control auth_state 440
• Description 440
• Example 440
• Format 440
• Parameters 440
• Restrictions 440
• 17 config mac_based_access_control max_users 441
• Description 441
• Example 441
• Format 441
• Parameters 441
• Restrictions 441
• 18 config mac_based_access_control trap state 442
• 19 config mac_based_access_control log state 442
• Description 442
• Example 442
• Format 442
• Parameters 442
• Restrictions 442
• Dws 3160 series gigabit ethernet unified switch cli reference guide 443
• Example 443
• To disable log state of mac based access control 443
• 1 create mac_based_vlan 444
• Chapter 43 mac based vlan command list 444
• Description 444
• Example 444
• Format 444
• Parameters 444
• Restrictions 444
• 2 delete mac_based_vlan 445
• 3 show mac_based_vlan 445
• Description 445
• Example 445
• Format 445
• Parameters 445
• Restrictions 445
• Example 446
• Restrictions 446
• 1 config mirror 447
• Chapter 44 mirror command list 447
• Description 447
• Example 447
• Format 447
• Parameters 447
• Restrictions 447
• 2 enable mirror 448
• 3 disable mirror 448
• Description 448
• Example 448
• Format 448
• Parameters 448
• Restrictions 448
• 4 show mirror 449
• Description 449
• Example 449
• Format 449
• Parameters 449
• Restrictions 449
• 1 config mld_snooping 450
• Chapter 45 mld snooping command list 450
• Description 450
• Format 450
• Parameters 450
• 2 config mld_snooping querier 451
• Description 451
• Example 451
• Format 451
• Parameters 451
• Restrictions 451
• Example 452
• Restrictions 452
• 3 config mld_snooping router_ports 453
• 4 config mld_snooping router_ports_forbidden 453
• Description 453
• Example 453
• Format 453
• Parameters 453
• Restrictions 453
• 5 enable mld_snooping 454
• Description 454
• Example 454
• Format 454
• Parameters 454
• Restrictions 454
• 6 disable mld_snooping 455
• 7 show mld_snooping 455
• Description 455
• Example 455
• Format 455
• Parameters 455
• Restrictions 455
• Dws 3160 series gigabit ethernet unified switch cli reference guide 456
• Enter the vlan id list here 456
• Enter the vlan name here the vlan name can be up to 32 characters 456
• Example 456
• Format 456
• If vlan is not specified the system will display all current mld snooping configurations 456
• Parameters 456
• Restrictions 456
• To display mld snooping 456
• Vlan optional specifies the name of the vlan for which you want to view the mld snooping 456
• Vlanid optional specifies the id of the vlan for which you want to view the mld snooping 456
• 8 show mld_snooping group 457
• Description 457
• Example 457
• Format 457
• Parameters 457
• Restrictions 457
• Dws 3160 series gigabit ethernet unified switch cli reference guide 458
• 9 show mld_snooping forwarding 459
• Description 459
• Example 459
• Format 459
• Parameters 459
• Restrictions 459
• 10 show mld_snooping mrouter_ports 460
• 11 create mld_snooping static_group 460
• Description 460
• Example 460
• Format 460
• Parameters 460
• Restrictions 460
• 12 delete mld_snooping static_group 461
• Description 461
• Example 461
• Format 461
• Parameters 461
• Restrictions 461
• 13 config mld_snooping static_group 462
• Description 462
• Example 462
• Format 462
• Parameters 462
• Restrictions 462
• 14 show mld_snooping static_group 463
• Description 463
• Example 463
• Format 463
• Parameters 463
• Restrictions 463
• 15 config mld_snooping data_driven_learning 464
• Description 464
• Example 464
• Format 464
• Parameters 464
• Restrictions 464
• 16 config mld_snooping data_driven_learning max_learned_entry 465
• 17 clear mld_snooping data_driven_group 465
• Description 465
• Example 465
• Format 465
• Parameters 465
• Restrictions 465
• 18 show mld_snooping statistic counter 466
• Description 466
• Example 466
• Format 466
• Parameters 466
• Restrictions 466
• 19 clear mld_snooping statistic counter 467
• Clear mld_snooping statistics counter 467
• Description 467
• Dws 3160 series gigabit ethernet unified switch cli reference guide 467
• Example 467
• Format 467
• Only administrators operators and power users can issue this command 467
• Parameters 467
• Restrictions 467
• This command is used to clear mld snooping statistics counters 467
• To clear mld snooping statistics counter 467
• To display mld snooping statistics counters 467
• 20 config mld_snooping rate_limit 468
• 21 show mld_snooping rate_limit 468
• Description 468
• Example 468
• Format 468
• Parameters 468
• Restrictions 468
• Dws 3160 series gigabit ethernet unified switch cli reference guide 469
• Enter the range of ports to be configured here 469
• Enter the vlan id list here 469
• Example 469
• Format 469
• Parameters 469
• Ports specifies a list of ports 469
• Restrictions 469
• To configure the mld_snooping per port rate_limit 469
• Vlanid specifies a list of vlans 469
• 1 create mld_snooping multicast_vlan 470
• Chapter 46 mld snooping multicast msm vlan command list 470
• Description 470
• Format 470
• Parameters 470
• 2 config mld_snooping multicast_vlan 471
• Description 471
• Example 471
• Format 471
• Parameters 471
• Restrictions 471
• 3 create mld_snooping multicast_vlan_group_profile 472
• Description 472
• Example 472
• Format 472
• Parameters 472
• Restrictions 472
• 4 config mld_snooping multicast_vlan_group_profile 473
• Description 473
• Example 473
• Format 473
• Parameters 473
• Restrictions 473
• 5 delete mld_snooping multicast_vlan_group_profile 474
• 6 show mld_snooping multicast_vlan_group_profile 474
• Description 474
• Example 474
• Format 474
• Parameters 474
• Restrictions 474
• 7 config mld_snooping multicast_vlan_group 475
• Description 475
• Example 475
• Format 475
• Parameters 475
• Restrictions 475
• 8 show mld_snooping multicast_vlan_group 476
• Description 476
• Example 476
• Format 476
• Parameters 476
• Restrictions 476
• 10 enable mld_snooping multicast_vlan 477
• 9 delete mld_snooping multicast_vlan 477
• Description 477
• Example 477
• Format 477
• Parameters 477
• Restrictions 477
• 11 disable mld_snooping multicast_vlan 478
• Description 478
• Example 478
• Format 478
• Parameters 478
• Restrictions 478
• 12 config mld_snooping multicast_vlan forward_unmatched 479
• 13 show mld_snooping multicast_vlan 479
• Description 479
• Example 479
• Format 479
• Parameters 479
• Restrictions 479
• Dws 3160 series gigabit ethernet unified switch cli reference guide 480
• Example 480
• To display all mld snooping multicast vlan entries 480
• 1 create mcast_filter_profile 481
• Chapter 47 multicast filter command list 481
• Description 481
• Example 481
• Format 481
• Parameters 481
• Restrictions 481
• 2 config mcast_filter_profile 482
• 3 config mcast_filter_profile ipv6 482
• Description 482
• Example 482
• Format 482
• Parameters 482
• Restrictions 482
• 4 delete mcast_filter_profile 483
• Description 483
• Example 483
• Format 483
• Parameters 483
• Restrictions 483
• 5 show mcast_filter_profile 484
• Description 484
• Example 484
• Format 484
• Parameters 484
• Restrictions 484
• 6 config limited_multicast_addr 485
• Description 485
• Example 485
• Format 485
• Parameters 485
• 7 config max_mcast_group 486
• Description 486
• Example 486
• Format 486
• Parameters 486
• Restrictions 486
• 8 show max_mcast_group 487
• Description 487
• Example 487
• Format 487
• Parameters 487
• Restrictions 487
• 9 show limited_multicast_addr 488
• Description 488
• Example 488
• Format 488
• Parameters 488
• Restrictions 488
• Dws 3160 series gigabit ethernet unified switch cli reference guide 489
• 1 show stp 490
• Chapter 48 multiple spanning tree protocol mstp command list 490
• Description 490
• Example 490
• Format 490
• Parameters 490
• Restrictions 490
• 2 show stp instance 491
• Description 491
• Example 491
• Format 491
• Parameters 491
• Restrictions 491
• 3 show stp ports 492
• Description 492
• Dws 3160 series gigabit ethernet unified switch cli reference guide 492
• Example 492
• Format 492
• Optional enter a list of ports used for the configuration here 492
• Parameters 492
• Ports to display parameters of the designated port numbers to be distinguished from 492
• Restrictions 492
• This command is used to display the port information includes parameters setting and operational value 492
• To display stp ports 492
• 4 show stp mst_config_id 493
• Description 493
• Dws 3160 series gigabit ethernet unified switch cli reference guide 493
• Example 493
• Format 493
• Parameters 493
• Restrictions 493
• Show stp mst_config_id 493
• This command is used to display the mst configuration identification 493
• To display stp mst configuration id 493
• 5 create stp instance_id 494
• 6 delete stp instance_id 494
• Description 494
• Example 494
• Format 494
• Parameters 494
• Restrictions 494
• 7 config stp instance_id 495
• Description 495
• Example 495
• Format 495
• Parameters 495
• Restrictions 495
• 8 config stp mst_config_id 496
• 9 enable stp 496
• Description 496
• Example 496
• Format 496
• Parameters 496
• Restrictions 496
• 10 disable stp 497
• 11 config stp version 497
• Description 497
• Example 497
• Format 497
• Parameters 497
• Restrictions 497
• 12 config stp priority 498
• Description 498
• Example 498
• Format 498
• Parameters 498
• Restrictions 498
• 13 config stp 499
• Description 499
• Example 499
• Format 499
• Parameters 499
• Restrictions 499
• 14 config stp ports 500
• Description 500
• Example 500
• Format 500
• Parameters 500
• 15 config stp mst_ports 501
• Description 501
• Example 501
• Format 501
• Parameters 501
• Restrictions 501
• Example 502
• 1 create nlb multicast_fdb 503
• Chapter 49 network load balancing nlb command list 503
• Description 503
• Example 503
• Format 503
• Parameters 503
• Restrictions 503
• 2 delete nlb multicast_fdb 504
• 3 config nlb multicast_fdb 504
• Description 504
• Example 504
• Format 504
• Parameters 504
• Restrictions 504
• 4 show nlb fdb 505
• Description 505
• Example 505
• Format 505
• Parameters 505
• Restrictions 505
• Dws 3160 series gigabit ethernet unified switch cli reference guide 506
• 1 show packet ports 507
• Chapter 50 network monitoring command list 507
• Description 507
• Example 507
• Format 507
• Parameters 507
• Restrictions 507
• 2 show error ports 508
• Description 508
• Dws 3160 series gigabit ethernet unified switch cli reference guide 508
• Example 508
• Format 508
• Parameters 508
• Restrictions 508
• Specifies a range of ports to be displayed 508
• This command is used to display error statistics for a range of ports 508
• To display the errors of the port 23 508
• 3 show utilization 509
• Cpu specifies to display information regarding the cpu ports specifies a range of ports to be displayed 509
• Description 509
• Dws 3160 series gigabit ethernet unified switch cli reference guide 509
• Example 509
• Format 509
• Parameters 509
• Restrictions 509
• Show utilization cpu ports 509
• This command is used to display real time cpu or port utilization statistics 509
• To display the ports utilization 509
• 4 show utilization dram 510
• Description 510
• Dws 3160 series gigabit ethernet unified switch cli reference guide 510
• Format 510
• Parameters 510
• Show utilization dram 510
• This command is used to display dram memory utilization 510
• To display the cpu utilization 510
• 5 show utilization flash 511
• Description 511
• Dws 3160 series gigabit ethernet unified switch cli reference guide 511
• Example 511
• Format 511
• Parameters 511
• Restrictions 511
• Show utilization flash 511
• This command is used to display the flash memory utilization 511
• To display dram utilization 511
• To display flash utilization 511
• 6 clear counters 512
• Description 512
• Dws 3160 series gigabit ethernet unified switch cli reference guide 512
• Enter a list of ports used for the configuration here 512
• Example 512
• Format 512
• If no parameter is specified system will display counters of all the ports 512
• Only administrators and operators can issue this command 512
• Parameters 512
• Ports optional specifies a range of ports to be configured the port list is specified by listing 512
• Restrictions 512
• This command is used to clear the switch s statistics counters 512
• To clear the switch s statistics counters 512
• 1 config ethernet_oam ports 513
• Chapter 51 oam command list 513
• Description 513
• Format 514
• Parameters 514
• Example 515
• Restrictions 515
• Dws 3160 series gigabit ethernet unified switch cli reference guide 516
• To configure a dying gasp event for port 1 516
• To configure the error frame seconds threshold to 2 and period to 10000 ms for port 1 516
• To configure the error frame threshold to 2 and period to 1000 ms for port 1 516
• To configure the error frame threshold to10 and period to 1000000 ms for port 1 516
• To start remote loopback on port 1 516
• 2 show ethernet_oam ports 517
• Description 517
• Example 518
• Format 518
• Parameters 518
• Restrictions 518
• 3 clear ethernet_oam ports 519
• All event_log statistics 519
• Description 519
• Dws 3160 series gigabit ethernet unified switch cli reference guide 519
• Example 519
• Format 519
• Only administrators and operators can issue this command 519
• Parameters 519
• Restrictions 519
• Specifies a range of ethernet oam ports to be cleared all specifies to clear all ethernet oam ports event_log specifies to clear ethernet oam event log information statistics specifies to clear ethernet oam statistics 519
• This command is used to clear ethernet oam information 519
• To clear port 1 oam statistics 519
• Dws 3160 series gigabit ethernet unified switch cli reference guide 520
• To clear port 1 oam events 520
• 1 show device_status 521
• 2 show environment 521
• Chapter 52 peripherals command list 521
• Description 521
• Example 521
• Format 521
• Parameters 521
• Restrictions 521
• 3 config temperature threshold 522
• Description 522
• Example 522
• Format 522
• Parameters 522
• Restrictions 522
• 4 config temperature 523
• Description 523
• Example 523
• Format 523
• Parameters 523
• Restrictions 523
• 1 ping 524
• Chapter 53 ping command list 524
• Description 524
• Example 524
• Format 524
• Parameters 524
• Restrictions 524
• 2 ping6 525
• Description 525
• Example 525
• Format 525
• Parameters 525
• Restrictions 525
• 1 config port_security system max_learning_addr 526
• Chapter 54 port security command list 526
• Description 526
• Example 526
• Format 526
• Parameters 526
• Restrictions 526
• 2 config port_security ports 527
• Description 527
• Format 527
• Parameters 527
• 3 config port_security vlan 528
• Description 528
• Example 528
• Format 528
• Parameters 528
• Restrictions 528
• 4 delete port_security_entry 529
• 5 clear port_security_entry 529
• Description 529
• Example 529
• Format 529
• Parameters 529
• Restrictions 529
• 6 show port_security_entry 530
• Description 530
• Example 530
• Format 530
• Parameters 530
• Restrictions 530
• 7 show port_security 531
• Description 531
• Dws 3160 series gigabit ethernet unified switch cli reference guide 531
• Example 531
• Format 531
• If both ports and vlanid or vlan_name are specified configurations matching any of these parameters will be displayed 531
• Restrictions 531
• This command is used to display the port security related information including state maximum learned addresses and lock address mode on a port and or on a vlan 531
• To display all the port security entries 531
• 8 enable port_security trap_log 532
• Description 532
• Example 532
• Format 532
• Parameters 532
• Restrictions 532
• 9 disable port_security trap_log 533
• Description 533
• Example 533
• Format 533
• Parameters 533
• Restrictions 533
• 1 config poe system 534
• Chapter 55 power over ethernet poe command list 534
• Description 534
• Format 534
• Parameters 534
• Restrictions 534
• 2 config poe ports 535
• Description 535
• Example 535
• Format 535
• Parameters 535
• 3 show poe system 536
• Description 536
• Example 536
• Restrictions 536
• 4 show poe ports 537
• Description 537
• Example 537
• Format 537
• Parameters 537
• Restrictions 537
• Dws 3160 series gigabit ethernet unified switch cli reference guide 538
• Example 538
• To display poe information of ports 1 to 6 538
• 1 config power_saving 539
• Chapter 56 power saving command list 539
• Description 539
• Example 539
• Format 539
• Parameters 539
• Restrictions 539
• 2 show power_saving 540
• Description 540
• Example 540
• Format 540
• Parameters 540
• Restrictions 540
• 1 create dot1v_protocol_group 541
• Chapter 57 protocol vlan command list 541
• Description 541
• Example 541
• Format 541
• Parameters 541
• Restrictions 541
• 2 config dot1v_protocol_group add protocol 542
• 3 delete dot1v_protocol_group 542
• Description 542
• Example 542
• Format 542
• Parameters 542
• Restrictions 542
• 4 show dot1v_protocol_group 543
• Description 543
• Example 543
• Format 543
• Parameters 543
• Restrictions 543
• 5 config port dot1v 544
• Description 544
• Format 544
• Parameters 544
• Restrictions 544
• 6 show port dot1v 545
• Description 545
• Example 545
• Format 545
• Parameters 545
• Restrictions 545
• 1 enable qinq 546
• Chapter 58 qinq command list 546
• Description 546
• Example 546
• Format 546
• Parameters 546
• Restrictions 546
• 2 disable qinq 547
• 3 config qinq inner_tpid 547
• Description 547
• Example 547
• Format 547
• Parameters 547
• Restrictions 547
• 4 config qinq ports 548
• Description 548
• Example 548
• Format 548
• Parameters 548
• Restrictions 548
• 5 show qinq 549
• 6 show qinq inner_tpid 549
• Description 549
• Example 549
• Format 549
• Parameters 549
• Restrictions 549
• 7 show qinq ports 550
• Description 550
• Example 550
• Format 550
• Parameters 550
• Restrictions 550
• 8 create vlan_translation ports 551
• Description 551
• Format 551
• Parameters 551
• 9 delete vlan_translation ports 552
• Description 552
• Example 552
• Format 552
• Parameters 552
• Restrictions 552
• 10 show vlan_translation 553
• Description 553
• Example 553
• Format 553
• Parameters 553
• Restrictions 553
• 1 config bandwidth_control 554
• Chapter 59 quality of service qos command list 554
• Description 554
• Format 554
• Parameters 554
• 2 show bandwidth_control 555
• Description 555
• Example 555
• Format 555
• Parameters 555
• Restrictions 555
• 3 config per_queue bandwidth_control 556
• Description 556
• Format 556
• Parameters 556
• 4 show per_queue bandwidth_control 557
• Description 557
• Example 557
• Format 557
• Parameters 557
• Restrictions 557
• 5 config scheduling 558
• Description 558
• Example 558
• Format 558
• Parameters 558
• Restrictions 558
• 6 config scheduling_mechanism 559
• 7 show scheduling 559
• Description 559
• Example 559
• Format 559
• Parameters 559
• Restrictions 559
• 8 show scheduling_mechanism 560
• Description 560
• Example 560
• Format 560
• Parameters 560
• Restrictions 560
• 9 config 802 p user_priority 561
• Description 561
• Example 561
• Format 561
• Parameters 561
• Restrictions 561
• 10 show 802 p user_priority 562
• 11 config 802 p default_priority 562
• Description 562
• Example 562
• Format 562
• Parameters 562
• Restrictions 562
• 12 show 802 p default_priority 563
• Description 563
• Example 563
• Format 563
• Parameters 563
• Restrictions 563
• 13 enable hol_prevention 564
• Description 564
• Dws 3160 series gigabit ethernet unified switch cli reference guide 564
• Enable hol_prevention 564
• Example 564
• Format 564
• Only administrators operators and power users can issue this command 564
• Parameters 564
• Restrictions 564
• This command is used to enable head of line hol prevention on the switch 564
• To display 802 p default priority 564
• To enable hol prevention on the switch 564
• 14 disable hol_prevention 565
• 15 show hol_prevention 565
• Description 565
• Example 565
• Format 565
• Parameters 565
• Restrictions 565
• 16 config dscp trust 566
• Description 566
• Example 566
• Format 566
• Parameters 566
• Restrictions 566
• 17 show dscp trust 567
• 18 config dscp map 567
• Description 567
• Example 567
• Format 567
• Parameters 567
• Restrictions 567
• 19 show dscp map 568
• Description 568
• Example 568
• Format 568
• Parameters 568
• Restrictions 568
• Example 569
• Format 569
• Parameters 569
• Restrictions 569
• 1 enable rspan 570
• Chapter 60 remote switched port analyzer rspan command list 570
• Description 570
• Format 570
• Parameters 570
• Restrictions 570
• 2 disable rspan 571
• 3 create rspan vlan 571
• Description 571
• Example 571
• Format 571
• Parameters 571
• Restrictions 571
• 4 delete rspan vlan 572
• Description 572
• Example 572
• Format 572
• Parameters 572
• Restrictions 572
• 5 config rspan vlan 573
• Description 573
• Example 573
• Format 573
• Parameters 573
• 6 show rspan 574
• Description 574
• Dws 3160 series gigabit ethernet unified switch cli reference guide 574
• Example 574
• Format 574
• Only administrators and operators can issue this command 574
• Parameters 574
• Restrictions 574
• This command is used to display the rspan configuration 574
• To add redirect ports for special rspan vlan on intermediate or destination switch 574
• To configure an rspan source entry for per flow rspan without any source ports 574
• To configure an rspan source entry without source target port 574
• Vlan_name optional specifies the rspan vlan by vlan name 574
• Dws 3160 series gigabit ethernet unified switch cli reference guide 575
• Enter the vlan id here this value must be between 1 and 4094 575
• Enter the vlan name here 575
• Example 575
• Restrictions 575
• To display the rspan settings 575
• Vlan_id optional specifies the rspan vlan by vlan id 575
• 1 config safeguard_engine 576
• Chapter 61 safeguard engine command list 576
• Description 576
• Example 576
• Format 576
• Parameters 576
• Restrictions 576
• 2 show safeguard_engine 577
• Description 577
• Dws 3160 series gigabit ethernet unified switch cli reference guide 577
• Example 577
• Format 577
• Note the safeguard engine has two status modes called exhausted mode and normal mode 577
• Parameters 577
• Restrictions 577
• Show safeguard_engine 577
• This command is used to display safeguard engine information 577
• To display safeguard_engine information 577
• 1 config ssh algorithm 578
• Chapter 62 secure shell ssh command list 578
• Description 578
• Format 578
• Parameters 578
• Restrictions 578
• 2 show ssh algorithm 579
• Description 579
• Example 579
• Format 579
• Parameters 579
• Restrictions 579
• 3 config ssh authmode 580
• Config ssh authmode password publickey hostbased enable disable 580
• Description 580
• Dws 3160 series gigabit ethernet unified switch cli reference guide 580
• Format 580
• Only administrators operators and power users can issue this command 580
• Parameters 580
• Password specifies user authentication method publickey specifies user authentication method hostbased specifies user authentication method enable enable user authentication method disable disable user authentication method 580
• Restrictions 580
• This command is used to configure the user authentication method for ssh 580
• 4 show ssh authmode 581
• 5 config ssh user 581
• Description 581
• Example 581
• Format 581
• Parameters 581
• Restrictions 581
• 6 show ssh user 582
• Description 582
• Example 582
• Format 582
• Parameters 582
• Restrictions 582
• 7 config ssh server 583
• Description 583
• Format 583
• Parameters 583
• Restrictions 583
• 8 enable ssh 584
• 9 disable ssh 584
• Description 584
• Example 584
• Format 584
• Parameters 584
• Restrictions 584
• 10 show ssh server 585
• Description 585
• Example 585
• Format 585
• Parameters 585
• Restrictions 585
• 1 download ssl certificate 587
• Chapter 63 secure sockets layer ssl command list 587
• Description 587
• Example 587
• Format 587
• Parameters 587
• Restrictions 587
• 2 enable ssl 588
• Description 588
• Example 588
• Format 588
• Parameters 588
• Restrictions 588
• 3 disable ssl 589
• Description 589
• Example 589
• Format 589
• Parameters 589
• Restrictions 589
• 4 show ssl 590
• Certificate optional specifies that the ssl certificate will be displayed 590
• Description 590
• Dws 3160 series gigabit ethernet unified switch cli reference guide 590
• Example 590
• Format 590
• Parameters 590
• Restrictions 590
• Show ssl certificate 590
• This command is used to display the certificate status user must download specified certificate type according to desired key exchange algorithm the options may be no certificate rsa type or dsa type certificate 590
• To display certificate 590
• To display ssl 590
• 5 show ssl cachetimeout 591
• 6 config ssl cachetimeout 591
• Description 591
• Example 591
• Format 591
• Parameters 591
• Restrictions 591
• Example 592
• Restrictions 592
• 1 create sflow flow_sampler 593
• Chapter 64 sflow command list 593
• Description 593
• Format 593
• Parameters 593
• 2 config sflow flow_sampler 594
• Description 594
• Example 594
• Format 594
• Parameters 594
• Restrictions 594
• 3 delete sflow flow_sampler 595
• 4 create sflow counter_poller 595
• Description 595
• Example 595
• Format 595
• Parameters 595
• Restrictions 595
• 5 config sflow counter_poller 596
• Description 596
• Example 596
• Format 596
• Parameters 596
• Restrictions 596
• 6 delete sflow counter_poller 597
• 7 create sflow analyzer_server 597
• Description 597
• Example 597
• Format 597
• Parameters 597
• Restrictions 597
• 8 config sflow analyzer_server 598
• Description 598
• Example 598
• Format 598
• Parameters 598
• Restrictions 598
• 9 delete sflow_analyzer_server 599
• Description 599
• Example 599
• Format 599
• Parameters 599
• Restrictions 599
• 10 enable sflow 600
• Description 600
• Example 600
• Format 600
• Parameters 600
• Restrictions 600
• 11 disable sflow 601
• 12 show sflow 601
• Description 601
• Example 601
• Format 601
• Parameters 601
• Restrictions 601
• 13 show sflow flow_sampler 602
• 14 show sflow counter_poller 602
• Description 602
• Example 602
• Format 602
• Parameters 602
• Restrictions 602
• 15 show sflow analyzer_server 603
• Description 603
• Example 603
• Format 603
• Parameters 603
• Restrictions 603
• Dws 3160 series gigabit ethernet unified switch cli reference guide 604
• 1 show tech_support 605
• Chapter 65 show technical support command list 605
• Description 605
• Example 605
• Format 605
• Parameters 605
• Restrictions 605
• 2 upload tech_support_totftp 606
• Description 606
• Dws 3160 series gigabit ethernet unified switch cli reference guide 606
• This command is used to upload the technical information of this switch to a tftp server 606
• Example 607
• Format 607
• Parameters 607
• Restrictions 607
• 1 create snmp community 608
• Chapter 66 simple network management protocol snmp command list 608
• Description 608
• 2 delete snmp community 609
• Description 609
• Example 609
• Format 609
• Parameters 609
• Restrictions 609
• 3 show snmp community 610
• Description 610
• Example 610
• Format 610
• Parameters 610
• Restrictions 610
• 4 create snmp user 611
• Description 611
• Format 611
• Parameters 611
• 5 delete snmp user 612
• Description 612
• Example 612
• Format 612
• Parameters 612
• Restrictions 612
• 6 show snmp user 613
• 7 create snmp group 613
• Description 613
• Example 613
• Format 613
• Parameters 613
• Restrictions 613
• 8 delete snmp group 614
• Description 614
• Example 614
• Format 614
• Parameters 614
• Restrictions 614
• 9 show snmp groups 615
• Description 615
• Example 615
• Format 615
• Parameters 615
• Restrictions 615
• 10 create snmp view 616
• Description 616
• Dws 3160 series gigabit ethernet unified switch cli reference guide 616
• Enter the view name here the name can be up to 32 characters long 616
• Format 616
• Included includes for this view excluded excluded for this view 616
• Object identified tree mib tree view_type specifies the access type of the mib tree in this view 616
• Only administrators can issue this command 616
• Parameters 616
• Restrictions 616
• This command is used to assign views to community strings to limit which mib objects an snmp manager can access 616
• View view name to be created 616
• View_type included excluded 616
• 11 delete snmp view 617
• 12 show snmp view 617
• Description 617
• Example 617
• Format 617
• Parameters 617
• Restrictions 617
• 13 create snmp 618
• Description 618
• Example 618
• Format 618
• Parameters 618
• Restrictions 618
• 14 delete snmp 619
• Description 619
• Example 619
• Format 619
• Parameters 619
• Restrictions 619
• 15 show snmp host 620
• 16 show snmp v6host 620
• Description 620
• Example 620
• Format 620
• Parameters 620
• Restrictions 620
• 17 config snmp engineid 621
• Description 621
• Dws 3160 series gigabit ethernet unified switch cli reference guide 621
• Enter the ipv6 address used for the configuration here 621
• Example 621
• Format 621
• If no parameter specified all snmp hosts will be displayed 621
• Parameters 621
• Restrictions 621
• This command is used to configure a identifier for the snmp engine on the switch 621
• To display snmp host 621
• V6host optional specifies the ipv6 host address 621
• 18 show snmp engineid 622
• Description 622
• Example 622
• Format 622
• Parameters 622
• Restrictions 622
• 19 enable snmp 623
• 20 disable snmp 623
• Description 623
• Example 623
• Format 623
• Parameters 623
• Restrictions 623
• 21 config snmp system_name 624
• 22 config snmp system_location 624
• Description 624
• Example 624
• Format 624
• Parameters 624
• Restrictions 624
• 23 config snmp system_contact 625
• Description 625
• Example 625
• Format 625
• Parameters 625
• Restrictions 625
• 24 enable snmp traps 626
• 25 disable snmp traps 626
• Description 626
• Example 626
• Format 626
• Parameters 626
• Restrictions 626
• 26 enable snmp authenticate_traps 627
• 27 disable snmp authenticate_traps 627
• Description 627
• Example 627
• Format 627
• Parameters 627
• Restrictions 627
• 28 enable snmp linkchange_traps 628
• 29 disable snmp linkchange_traps 628
• Description 628
• Example 628
• Format 628
• Parameters 628
• Restrictions 628
• 30 config snmp linkchange_traps ports 629
• Description 629
• Example 629
• Format 629
• Parameters 629
• Restrictions 629
• 31 config snmp coldstart_traps 630
• 32 config snmp warmstart_traps 630
• Description 630
• Example 630
• Format 630
• Parameters 630
• Restrictions 630
• 33 show snmp traps 631
• 34 config rmon trap 631
• Description 631
• Example 631
• Format 631
• Parameters 631
• Restrictions 631
• 35 show rmon 632
• Description 632
• Example 632
• Format 632
• Parameters 632
• Restrictions 632
• Dws 3160 series gigabit ethernet unified switch cli reference guide 633
• 1 enable sim 634
• 2 disable sim 634
• Chapter 67 single ip management command list 634
• Description 634
• Example 634
• Format 634
• Parameters 634
• Restrictions 634
• 3 show sim 635
• Description 635
• Example 635
• Format 635
• Parameters 635
• Restrictions 635
• Dws 3160 series gigabit ethernet unified switch cli reference guide 636
• Example 636
• To display the candidate information in summary if user specifies candidate id it would display information in detail 636
• To display the group information in detail 636
• To display the member information in summary if user specifies member id it will display information in detail 636
• To display the self information in detail 636
• 4 reconfig 637
• Description 637
• Dws 3160 series gigabit ethernet unified switch cli reference guide 637
• Enter the serial number id of the member here 637
• Exit optional specifies to exit from the telnet session 637
• Format 637
• Member_id optional specifies the serial number of the member 637
• Parameters 637
• This command is used to reconnect to a sim member by using the member id 637
• To display neighbor table of sim 637
• 5 config sim_group 638
• Description 638
• Example 638
• Format 638
• Parameters 638
• Restrictions 638
• 6 config sim 639
• Description 639
• Example 639
• Format 639
• Parameters 639
• Restrictions 639
• 7 download sim_ms 640
• Description 640
• Format 640
• Parameters 640
• 8 upload sim_ms 641
• Description 641
• Dws 3160 series gigabit ethernet unified switch cli reference guide 641
• Enter the member list used here this value must be between 1 and 4 all specifies that all members will be used 641
• Example 641
• Format 641
• Members optional specifies a range of members who can download this firmware or 641
• Only administrators can issue this command 641
• Restrictions 641
• This command is used to upload a configuration to the tftp server 641
• To download the configuration 641
• To download the firmware 641
• Example 642
• Parameters 642
• Restrictions 642
• 1 config syslog source_ipif 643
• Chapter 68 syslog and trap source interface command list 643
• Description 643
• Example 643
• Format 643
• Parameters 643
• Restrictions 643
• 2 show syslog source_ipif 644
• 3 config trap source_ipif 644
• Description 644
• Example 644
• Format 644
• Parameters 644
• Restrictions 644
• 4 show trap source_ipif 645
• Description 645
• Example 645
• Format 645
• Parameters 645
• Restrictions 645
• Dws 3160 series gigabit ethernet unified switch cli reference guide 646
• Example 646
• To display the trap source ip interface 646
• 1 clear log 647
• Chapter 69 system log command list 647
• Description 647
• Example 647
• Format 647
• Parameters 647
• Restrictions 647
• 2 show log 648
• Description 648
• Example 648
• Format 648
• Parameters 648
• Restrictions 648
• 3 show log_software_module 649
• 4 enable syslog 649
• Description 649
• Dws 3160 series gigabit ethernet unified switch cli reference guide 649
• Example 649
• Format 649
• Parameters 649
• Restrictions 649
• Show log_software_module 649
• This command is used to display the protocols or applications that support the enhanced log the enhanced log adds the module name and module id network administrators can display logs by module name or module id 649
• This command is used to enable the sending of syslog messages 649
• To display the protocols or applications that support the enhanced log 649
• 5 disable syslog 650
• Description 650
• Example 650
• Format 650
• Parameters 650
• Restrictions 650
• 6 show syslog 651
• 7 config syslog host 651
• Description 651
• Example 651
• Format 651
• Parameters 651
• Restrictions 651
• 8 create syslog host 652
• Description 652
• Example 652
• Restrictions 652
• Example 653
• Format 653
• Parameters 653
• Restrictions 653
• 10 show syslog host 654
• 9 delete syslog host 654
• Description 654
• Example 654
• Format 654
• Parameters 654
• Restrictions 654
• 11 config log_save_timing 655
• Description 655
• Dws 3160 series gigabit ethernet unified switch cli reference guide 655
• Example 655
• Format 655
• Host the host index or all hosts 655
• If no parameter is specified all hosts will be displayed 655
• On_demand log_trigger 655
• Optional enter the host index value here 655
• Parameters 655
• Restrictions 655
• This command is used to configure the method for saving the log 655
• To display the syslog host information 655
• 12 show log_save_timing 656
• Description 656
• Example 656
• Format 656
• Parameters 656
• Restrictions 656
• 13 show attack_log 657
• 14 clear attack_log 657
• Description 657
• Example 657
• Format 657
• Parameters 657
• Restrictions 657
• Example 658
• Format 658
• Parameters 658
• Restrictions 658
• 1 config system_severity 659
• Chapter 70 system severity command list 659
• Description 659
• Example 659
• Format 659
• Parameters 659
• Restrictions 659
• 2 show system_severity 660
• Description 660
• Example 660
• Format 660
• Parameters 660
• Restrictions 660
• 1 telnet 661
• Chapter 71 telnet client command list 661
• Description 661
• Example 661
• Format 661
• Parameters 661
• Restrictions 661
• 1 download 662
• Chapter 72 tftp client command list 662
• Description 662
• Format 662
• Parameters 662
• Restrictions 662
• 2 upload 663
• Description 663
• Example 663
• Format 663
• Parameters 663
• Example 664
• Restrictions 664
• Dws 3160 series gigabit ethernet unified switch cli reference guide 665
• In case that the designated file does not exist 665
• To upload configuration from tftp 665
• To upload the master s dangerous log 665
• 1 config sntp 666
• Chapter 73 time and sntp command list 666
• Description 666
• Example 666
• Format 666
• Parameters 666
• Restrictions 666
• 2 show sntp 667
• 3 enable sntp 667
• Description 667
• Example 667
• Format 667
• Parameters 667
• Restrictions 667
• 4 disable sntp 668
• 5 config time 668
• Description 668
• Example 668
• Format 668
• Parameters 668
• Restrictions 668
• 6 config time_zone 669
• Description 669
• Example 669
• Format 669
• Parameters 669
• Restrictions 669
• 7 config dst 670
• Description 670
• Example 670
• Format 670
• Parameters 670
• 8 show time 671
• Description 671
• Example 671
• Format 671
• Parameters 671
• Restrictions 671
• Dws 3160 series gigabit ethernet unified switch cli reference guide 672
• Example 672
• Restrictions 672
• To display the time 672
• 1 traceroute 673
• Chapter 74 trace route command list 673
• Description 673
• Example 673
• Format 673
• Parameters 673
• Restrictions 673
• 2 traceroute6 674
• Description 674
• Format 674
• Parameters 674
• Dws 3160 series gigabit ethernet unified switch cli reference guide 675
• Example 675
• Only administrators operators and power users can issue this command 675
• Restrictions 675
• To trace the ipv6 routed path between the switch and 1210 100 11 with port 40000 675
• To trace the ipv6 routed path between the switch and 3000 1 675
• 1 config traffic control 676
• Chapter 75 traffic control command list 676
• Description 676
• Format 676
• Parameters 676
• 2 config traffic trap 677
• Description 677
• Example 677
• Format 677
• Parameters 677
• Restrictions 677
• 3 show traffic control 678
• Description 678
• Example 678
• Format 678
• Parameters 678
• Restrictions 678
• 4 config traffic control log state 679
• Description 679
• Format 679
• Parameters 679
• Restrictions 679
• 5 config traffic control auto_recover_time 680
• Description 680
• Example 680
• Format 680
• Parameters 680
• Restrictions 680
• 1 config traffic_segmentation 681
• 2 show traffic_segmentation 681
• Chapter 76 traffic segmentation command list 681
• Description 681
• Example 681
• Format 681
• Parameters 681
• Restrictions 681
• Dws 3160 series gigabit ethernet unified switch cli reference guide 682
• Example 682
• Optional specifies a range of ports to be displayed if no parameter is specified the system will display all current traffic segmentation tables 682
• Parameters 682
• Restrictions 682
• To display traffic segmentation table 682
• 1 create trusted_host 683
• Chapter 77 trusted host command list 683
• Description 683
• Example 683
• Format 683
• Parameters 683
• Restrictions 683
• 2 delete trusted_host 684
• 3 config trusted_host 684
• Description 684
• Example 684
• Format 684
• Parameters 684
• Restrictions 684
• 4 show trusted_host 685
• Description 685
• Example 685
• Format 685
• Parameters 685
• Restrictions 685
• Dws 3160 series gigabit ethernet unified switch cli reference guide 686
• Example 686
• Restrictions 686
• To display trusted hosts 686
• 1 create iproute 687
• Chapter 78 unicast routing command list 687
• Description 687
• Example 687
• Format 687
• Parameters 687
• Restrictions 687
• 2 delete iproute 688
• 3 show iproute 688
• Description 688
• Example 688
• Format 688
• Parameters 688
• Restrictions 688
• 4 show ipfdb 689
• Description 689
• Example 689
• Format 689
• Parameters 689
• Restrictions 689
• Dws 3160 series gigabit ethernet unified switch cli reference guide 690
• 1 enable vrrp 691
• Chapter 79 virtual router redundancy protocol vrrp command list 691
• Description 691
• Example 691
• Format 691
• Parameters 691
• Restrictions 691
• 2 disable vrrp 692
• 3 create vrrp vrid 692
• Description 692
• Example 692
• Format 692
• Parameters 692
• Restrictions 692
• 4 config vrrp vrid 693
• Description 693
• Example 693
• Format 693
• Restrictions 693
• 5 config vrrp ipif 694
• Description 694
• Example 694
• Parameters 694
• Restrictions 694
• 6 delete vrrp 695
• Description 695
• Example 695
• Format 695
• Parameters 695
• Restrictions 695
• 7 show vrrp 696
• Description 696
• Example 696
• Format 696
• Parameters 696
• Restrictions 696
• Dws 3160 series gigabit ethernet unified switch cli reference guide 697
• 1 enable vlan_trunk 698
• 2 disable vlan_trunk 698
• Chapter 80 vlan trunking command list 698
• Description 698
• Example 698
• Format 698
• Parameters 698
• Restrictions 698
• 3 config vlan_trunk 699
• Description 699
• Example 699
• Format 699
• Parameters 699
• Restrictions 699
• Dws 3160 series gigabit ethernet unified switch cli reference guide 700
• Enable specifies that the port is a vlan trunk port disable specifies that the port is not a vlan trunk port 700
• Enter a list of ports used for the configuration here all specifies that all the ports will be used for this configuration state specifies that the port is a vlan trunk port or not 700
• Example 700
• Only administrators can issue this command 700
• Parameters 700
• Port 6 is la 1 member port port 7 is la 1 master port 700
• Port 6 is la 1 member port port 7 is la 2 master port 700
• Restrictions 700
• To configure a vlan trunk port 700
• 4 show vlan_trunk 701
• Description 701
• Example 701
• Format 701
• Parameters 701
• Restrictions 701
• Dws 3160 series gigabit ethernet unified switch cli reference guide 702
• The following example displays the vlan information which will also display vlan trunk setting 702
• 1 enable voice_vlan 703
• Chapter 81 voice vlan command list 703
• Description 703
• Example 703
• Format 703
• Parameters 703
• Restrictions 703
• 2 disable voice_vlan 704
• 3 config voice_vlan priority 704
• Description 704
• Example 704
• Format 704
• Parameters 704
• Restrictions 704
• 4 config voice_vlan oui 705
• Description 705
• Example 705
• Format 705
• Parameters 705
• Restrictions 705
• 5 config voice_vlan ports 706
• Description 706
• Example 706
• Format 706
• Parameters 706
• Restrictions 706
• 6 config voice_vlan aging_time 707
• 7 show voice_vlan 707
• Description 707
• Example 707
• Format 707
• Parameters 707
• Restrictions 707
• 8 show voice_vlan oui 708
• Description 708
• Dws 3160 series gigabit ethernet unified switch cli reference guide 708
• Example 708
• Format 708
• Parameters 708
• Restrictions 708
• Show voice_vlan oui 708
• This command is used to display oui information of voice vlan 708
• To display the voice vlan global information when voice vlan is disabled 708
• To display the voice vlan global information when voice vlan is enabled 708
• 9 show voice_vlan ports 709
• Description 709
• Dws 3160 series gigabit ethernet unified switch cli reference guide 709
• Example 709
• Format 709
• Optional enter a list of ports used to be displayed here 709
• Parameters 709
• Restrictions 709
• This command is used to display the port voice vlan information 709
• To display the oui information of voice vlan 709
• To display the voice vlan information of ports 1 5 709
• 10 show voice_vlan voice device 710
• Description 710
• Example 710
• Format 710
• Parameters 710
• Restrictions 710
• 11 config voice_vlan log state 711
• Config voice_vlan log state enable disable 711
• Description 711
• Dws 3160 series gigabit ethernet unified switch cli reference guide 711
• Enable specifies that the sending of a voice vlan log will be enabled disable specifies that the sending of a voice vlan log will be disabled 711
• Example 711
• Format 711
• Log specifies to enable or disable the sending of a voice vlan log 711
• Only administrators operators and power users can issue this command 711
• Parameters 711
• Restrictions 711
• This command is used to configure the log state for voice vlan if there is a new voice device detected or a port joins leaves the voice vlan dynamically and the log is enabled a log will be triggered 711
• To enable the log state for voice vlan 711
• 1 create wireless ap_profile 712
• Chapter 82 wireless access point profile command list 712
• Description 712
• Format 712
• Parameters 712
• Restrictions 712
• 2 create wireless ap_profile copy 713
• Description 713
• Example 713
• Format 713
• Parameters 713
• Restrictions 713
• 3 delete wireless ap_profile 714
• Description 714
• Dws 3160 series gigabit ethernet unified switch cli reference guide 714
• Enter the ap profile id that will be deleted here this value must be between 1 and 714
• Format 714
• Parameters 714
• This command is used to delete an ap profile if the profile is referenced by an entry in the valid ap database or is applied to one or more managed aps it cannot be deleted the default profile 1 default can never be deleted 714
• 4 config wireless ap_profile 715
• Description 715
• Example 715
• Format 715
• Restrictions 715
• Parameters 716
• Example 722
• Restrictions 722
• Dws 3160 series gigabit ethernet unified switch cli reference guide 723
• To configure the ap hardware type on ap profile 1 723
• To configure the profile name on ap profile 1 723
• To configure the vlan on ap profile 1 723
• To enable the disconnected ap forwarding mode on ap profile 1 723
• To enable the disconnected ap management mode on ap profile 1 723
• Dws 3160 series gigabit ethernet unified switch cli reference guide 724
• To configure the bandwidth used in the channel when operating in 802 1n mode 724
• To configure the beacon interval on radio 1 of ap profile 1 724
• To enable all of the supported channels on the radio 1 of ap profile 1 to be eligible for auto channel selection 724
• To enable auto channel adjustment for the radio 1 of ap profile 1 724
• To enable the automatic power save delivery uapsd mode on radio 1 of ap profile 1 724
• Dws 3160 series gigabit ethernet unified switch cli reference guide 725
• To configure the dtim period for the radio 1 of ap profile 1 725
• To configure the fragmentation threshold for the radio 1 of ap profile 1 725
• To enable the administrative mode of the radio interface radio 1 on ap profile 1 725
• To enable the short guard interval when operating in 802 1n mode 725
• To enable the space time block code stbc mode on radio 1 of ap profile 1 725
• Dws 3160 series gigabit ethernet unified switch cli reference guide 726
• To add an mcs index for the radio 1 of ap profile 1 726
• To configure the utilization parameter of load balancing for the radio 1 of ap profile 1 726
• To delete an mcs index for the radio 1 of ap profile 1 726
• To enable load balancing for the radio 1 of ap profile 1 726
• To enable the incorrect frame no ack for the radio 1 of ap profile 1 726
• Dws 3160 series gigabit ethernet unified switch cli reference guide 727
• To configure the maximum number of simultaneous clients for the radio 1 of ap profile 1 727
• To configure the multicast tx rate for the radio 1 of ap profile 1 727
• To configure the power setting of the radio 1 of ap profile 1 727
• To configure the protection mode for the radio 1 of ap profile 1 727
• To enable the auto power adjustment for the radio 1 of ap profile 1 727
• Dws 3160 series gigabit ethernet unified switch cli reference guide 728
• To configure the parameters of qos ap edca queues including voice video best effort and background queues for the radio 1 of ap profile 1 the parameters include aifs minimum contention window maximum contention window and maximum burst duration 728
• To configure the parameters of qos station edca queues including voice video best effort and background queues for the radio 1 of ap profile 1 the parameters include aifs minimum contention window maximum contention window and transmission opportunity 728
• Dws 3160 series gigabit ethernet unified switch cli reference guide 729
• To configure the list of basic client data rates for the radio 1 of ap profile 1 729
• To configure the list of supported client data rates for the radio 1 of ap profile 1 729
• To enable broadcast and multicast traffic rate limiting for the radio 1 of ap profile 1 729
• Dws 3160 series gigabit ethernet unified switch cli reference guide 730
• To configure normal and burst traffic rate limiting for the radio 1 of ap profile 1 730
• To configure the rf scan duration for the radio 1 of ap profile 1 730
• To enable the rf scanning other channels and scanning interval time for the radio 1 of ap profile 1 730
• To enable the rf sentry mode and scanning channels for the radio 1 of ap profile 1 730
• Dws 3160 series gigabit ethernet unified switch cli reference guide 731
• To configure the rts threshold for the radio 1 of ap profile 1 731
• To configure the station isolation mode for the radio 1 of ap profile 1 731
• To enable the wmm mode for the radio 1 of ap profile 1 731
• To enable vap and settings associated with the network for the radio 1 of ap profile 1 731
• 5 show wireless ap_profile 732
• Description 732
• Example 732
• Format 732
• Parameters 732
• Restrictions 732
• Dws 3160 series gigabit ethernet unified switch cli reference guide 733
• To display a detailed configuration of ap profile 1 733
• To display a detailed configuration of radio 1 of ap profile 1 733
• To display a summary of ap profile 1 s radios 733
• Dws 3160 series gigabit ethernet unified switch cli reference guide 734
• To display the auto eligible lists of radio 1 of ap profile 1 734
• Dws 3160 series gigabit ethernet unified switch cli reference guide 735
• To display the qos configuration of radio 1 of ap profile 1 735
• Dws 3160 series gigabit ethernet unified switch cli reference guide 736
• To display a summary of ap profile radio 1 s vaps 736
• To display the basic rate lists and supported rate list of radio 1 of ap profile 1 736
• Dws 3160 series gigabit ethernet unified switch cli reference guide 737
• To display a detailed configuration of vap 1 of ap profile 1 s radio 1 737
• 1 delete wireless ap_failed 738
• 2 delete wireless ap_failure list 738
• Chapter 83 wireless ap failure status command list 738
• Description 738
• Example 738
• Format 738
• Parameters 738
• Restrictions 738
• 3 show wireless ap_failure 739
• Description 739
• Example 739
• Format 739
• Parameters 739
• Restrictions 739
• Dws 3160 series gigabit ethernet unified switch cli reference guide 740
• To displaying a specific failure ap status 740
• 1 config wireless client disassociate 741
• Chapter 84 wireless client association command list 741
• Description 741
• Example 741
• Format 741
• Parameters 741
• Restrictions 741
• 2 show wireless client 742
• Description 742
• Example 742
• Format 742
• Parameters 742
• Restrictions 742
• Dws 3160 series gigabit ethernet unified switch cli reference guide 743
• To display statistics of a specified client 743
• To display the neighbor ap of the specified client 743
• To display the qos radius information of a specified client 743
• Dws 3160 series gigabit ethernet unified switch cli reference guide 744
• To display association statistics of a specified client 744
• To display session statistics of a specified client 744
• 3 show wireless ssid 747
• Description 747
• Format 747
• Parameters 747
• 4 show wireless switch client 748
• Description 748
• Example 748
• Format 748
• Parameters 748
• Restrictions 748
• 5 show wireless vap 749
• Description 749
• Example 749
• Format 749
• Parameters 749
• Restrictions 749
• Dws 3160 series gigabit ethernet unified switch cli reference guide 750
• To display clients associated to the specific managed ap vap 750
• 1 delete wireless adhoc_list 751
• 2 show wireless adhoc 751
• Chapter 85 wireless ad hoc status command list 751
• Description 751
• Example 751
• Format 751
• Parameters 751
• Restrictions 751
• Dws 3160 series gigabit ethernet unified switch cli reference guide 752
• Example 752
• Optional enter the client mac address here 752
• Parameters 752
• Restrictions 752
• To display a summary of the ad hoc list 752
• 1 delete wireless detected_client 753
• 2 config wireless detected_client ack_rogue 753
• Chapter 86 wireless detected client database command list 753
• Description 753
• Example 753
• Format 753
• Parameters 753
• Restrictions 753
• 3 config wireless detected_client preauth_history_purge 754
• Description 754
• Example 754
• Format 754
• Parameters 754
• Restrictions 754
• 4 config wireless detected_client roam_history_purge 755
• 5 show wireless detected_client 755
• Description 755
• Example 755
• Format 755
• Parameters 755
• Restrictions 755
• 6 show wireless detected_client pre_auth_history 756
• Description 756
• Example 756
• Format 756
• Parameters 756
• Restrictions 756
• 7 show wireless detected_client roam_history 757
• Description 757
• Dws 3160 series gigabit ethernet unified switch cli reference guide 757
• Example 757
• Format 757
• This command is used to display the roaming history of the detected clients 757
• To display all detected clients pre authentication history 757
• To display the pre authentication history of a specific client detected 757
• 8 show wireless detected_client rogue_classification 758
• Description 758
• Dws 3160 series gigabit ethernet unified switch cli reference guide 758
• Example 758
• Optional enter the mac address of the specified detected client here 758
• Parameters 758
• Restrictions 758
• Roam_history specifies the roaming history for the clients in the detected client database a 758
• Roaming history of up to ten access points is displayed as only a maximum of ten records are maintained for each client clients that never authenticated with the managed network are not displayed in this list 758
• This command is used to display the wids rogue classification test results for a particular client mac address 758
• To display all the detected clients roam history 758
• To display the roam history of a specific client detected 758
• 9 show wireless detected_client triangulation 759
• Description 759
• Dws 3160 series gigabit ethernet unified switch cli reference guide 759
• Enter the mac address of the specified detected client here 759
• Example 759
• Format 759
• Mac address 759
• Parameters 759
• Restrictions 759
• Rogue_classification specifies the wids rogue classification test results for a particular client 759
• This command is used to display the signal triangulation status for the specified client entry 759
• To display the detected client rogue classification 759
• Example 760
• Parameters 760
• Restrictions 760
• 1 create wireless ap_database 761
• 2 delete wireless ap_database 761
• Chapter 87 wireless local access point database command list 761
• Description 761
• Example 761
• Format 761
• Parameters 761
• Restrictions 761
• 3 config wireless ap_database 762
• Description 762
• Example 762
• Format 762
• Parameters 762
• Restrictions 762
• Example 763
• Restrictions 763
• Dws 3160 series gigabit ethernet unified switch cli reference guide 764
• To configure the ap in managed mode and using profile 1 764
• To configure the ap in rogue mode 764
• To configure the managed ap to use channel 36 764
• To configure the stand alone ap to use an ssid of 123 764
• 4 show wireless ap_database 765
• Description 765
• Dws 3160 series gigabit ethernet unified switch cli reference guide 765
• Example 765
• Format 765
• Optional enter the ap s ethernet interface mac address used here 765
• Parameters 765
• Restrictions 765
• This command is used to display valid ap database entries if no parameter is specified then a summary is displayed when the users enters a mac address detailed information of a specific ap will be displayed 765
• To display a specific ap entry in the ap database 765
• To display the wireless ap database table 765
• 1 config wireless ap 767
• Chapter 88 wireless managed ap command list 767
• Description 767
• Example 767
• Format 767
• Parameters 767
• Restrictions 767
• 2 delete wireless ap_neighbors 768
• Description 768
• Example 768
• Format 768
• Parameters 768
• Restrictions 768
• 3 config wireless ap_download 769
• Description 769
• Example 769
• Format 769
• Parameters 769
• Restrictions 769
• 4 show wireless ap_download 770
• Description 770
• Dws 3160 series gigabit ethernet unified switch cli reference guide 770
• This command is used to display the global configuration and status of an ap code download request 770
• To abort an ap code download 770
• To configure a url for the image type dwl 3600ap dwl 6600ap 770
• To configure an ap code download group size of 12 770
• To start an ap code download for all managed aps running a specific image type 770
• 5 show wireless ap 771
• Description 771
• Dws 3160 series gigabit ethernet unified switch cli reference guide 771
• Example 771
• Format 771
• Parameters 771
• Restrictions 771
• Show wireless ap_download 771
• Statistics statistics rf_scan rogue_classification triangulation dist_tunnel statistics radio rf_scan 771
• This command is used to display the operational status for a wireless managed ap if no parameters are specified a summary of all managed aps will be displayed 771
• To display an ap code download configuration and status 771
• Example 772
• Parameters 772
• Restrictions 772
• Dws 3160 series gigabit ethernet unified switch cli reference guide 773
• To display the summary status of a managed ap on radio 1 773
• Dws 3160 series gigabit ethernet unified switch cli reference guide 774
• To display the channel status of a managed ap on radio 1 774
• To display the neighbor aps of a managed ap on radio 1 774
• To display the power status of a managed ap on radio 1 774
• To display the radar status of a managed ap on radio 1 774
• Dws 3160 series gigabit ethernet unified switch cli reference guide 775
• To display the neighbor clients of a managed ap on radio 1 775
• To display the summary vap status of a managed ap on radio 1 775
• Dws 3160 series gigabit ethernet unified switch cli reference guide 776
• To display the detailed statistics of a managed ap on radio 1 vap 1 776
• To display the detailed status of a managed ap on radio 1 vap 1 776
• Dws 3160 series gigabit ethernet unified switch cli reference guide 777
• To display the detailed statistics of a managed ap on radio 1 777
• Dws 3160 series gigabit ethernet unified switch cli reference guide 778
• To display the rf scan status of a managed ap 778
• To display the summary statistics of a managed ap 778
• Dws 3160 series gigabit ethernet unified switch cli reference guide 779
• To display the rf scan rogue classification information of a managed ap 779
• Dws 3160 series gigabit ethernet unified switch cli reference guide 780
• To display ap distributed tunnel statistics 780
• To display the rf scan triangulation information of a managed ap 780
• Dws 3160 series gigabit ethernet unified switch cli reference guide 781
• To display the radio summary of all managed aps 781
• To display the rf scan summary of all managed aps 781
• To display the summary of all managed aps 781
• Authenticated the ap has been validated and authenticated if authentication is enabled 782
• But it is not configured 782
• Database either locally or on the radius server 782
• Discovered the ap is discovered by the switch but is not yet authenticated upgrading the ap has been validated the ap code image is upgraded as it does not match the version stored on the wireless switch this status displays only if the integrated ap image mode is supported by the wireless switch 782
• Dws 3160 series gigabit ethernet unified switch cli reference guide 782
• In the above examples the following display parameters can be noticed 782
• Ip address displays the network ip address of the managed ap ip subnet mask displays the network mask of the managed ap managing switch displays whether the ap is managed by this wireless switch or a peer 782
• Mac address displays the ethernet address of the ws managed ap location displays the location description for the ap this is the value configured in the valid ap 782
• Switch mac address displays the ethernet address of the wireless switch managing the ap switch ip address displays the network ip address of the wireless switch managing the ap status displays the current managed state of the ap the possible values are 782
• Wireless switch 782
• 6 reboot wireless ap 786
• 7 download wireless ap_image image_type 786
• Description 786
• Example 786
• Format 786
• Parameters 786
• Restrictions 786
• Example 787
• Restrictions 787
• 1 create wireless network 788
• Chapter 89 wireless network command list 788
• Description 788
• Example 788
• Format 788
• Parameters 788
• Restrictions 788
• 2 delete wireless network 789
• 3 config wireless network 789
• Description 789
• Example 789
• Format 789
• Parameters 789
• Restrictions 789
• Parameters 790
• Example 794
• Restrictions 794
• Dws 3160 series gigabit ethernet unified switch cli reference guide 795
• To configure a mac acl rule to client qos on network 1 795
• To configure an ip acl rule to client qos on network 1 795
• To configure an ipv6 acl rule to client qos on network 1 795
• Dws 3160 series gigabit ethernet unified switch cli reference guide 796
• To configure a differentiated service diffserv policy to client qos on network 1 796
• To configure the client qos bandwidth limit on network 1 796
• To enable deny broadcast on network 1 796
• To enable layer 2 tunneling on network 1 796
• Dws 3160 series gigabit ethernet unified switch cli reference guide 797
• To configure 802 x layer 2 broadcast unicast key s refresh rate on network 1 797
• To enable hidden ssid on network 1 797
• To enable mac authentication on network 1 797
• To enable radius accounting on network 1 797
• Dws 3160 series gigabit ethernet unified switch cli reference guide 798
• To configure a redirected url on network 1 798
• To configure the redirect mode on network 1 798
• To configure the security mode on network 1 798
• To configure the ssid on network 1 798
• To configure the vlan on network 1 798
• Dws 3160 series gigabit ethernet unified switch cli reference guide 799
• To configure the wep authentication mode on network 1 799
• To configure the wep key length on network 1 799
• To configure the wep key type on network 1 799
• To configure the wep key value on network 1 799
• To configure the wep tx key on network 1 799
• To configure the wpa key ciphers on network 1 799
• Dws 3160 series gigabit ethernet unified switch cli reference guide 800
• To configure the layer 3 tunnel state on network 1 800
• To configure the wpa key value on network 1 800
• To configure the wpa key version on network 1 800
• To configure the wpa2 key caching hold time on network 1 800
• To configure the wpa2 pre authentication limit on network 1 800
• To configure the wpa2 pre authentication state on network 1 800
• 4 show wireless network 801
• Description 801
• Example 801
• Format 801
• Parameters 801
• Restrictions 801
• Dws 3160 series gigabit ethernet unified switch cli reference guide 802
• To display a detailed view of a specific network 802
• Dws 3160 series gigabit ethernet unified switch cli reference guide 803
• 1 config wireless peer_switch 804
• 2 config wireless peer_switch configuration 804
• Chapter 90 wireless peer switch command list 804
• Description 804
• Example 804
• Format 804
• Parameters 804
• Restrictions 804
• Example 805
• Format 805
• Parameters 805
• Restrictions 805
• 3 show wireless configuration 806
• Description 806
• Dws 3160 series gigabit ethernet unified switch cli reference guide 806
• Example 806
• Format 806
• Parameters 806
• Request specifies to display the configuration push status for all peer switches receive specifies to display the peer switch s configuration received status 806
• Restrictions 806
• Show wireless configuration request receive 806
• This command is used to display the global peer switch s configuration push status and configuration push status for all peer switches or the peer switch s configuration received status 806
• To display a wireless configuration receive 806
• To display a wireless configuration request 806
• 4 show wireless peer_switch 807
• Description 807
• Example 807
• Format 807
• Parameters 807
• Restrictions 807
• Dws 3160 series gigabit ethernet unified switch cli reference guide 808
• To display a summary of all wireless switch and managed aps 808
• To display the detailed configuration push status of a specific peer switch 808
• To display the detailed status of a specific ap 808
• To display the detailed status of a specific peer switch 808
• 5 show wireless peer_switch ap 809
• Description 809
• Dws 3160 series gigabit ethernet unified switch cli reference guide 809
• Example 809
• Format 809
• Optional enter the wireless switch s managed ap mac address here 809
• Parameters 809
• Restrictions 809
• This command is used to display the operational status of the peer wireless switch s managed ap s if no parameter are specified this command will display a summary of all the wireless switch s managed aps if an ap mac address is specified a detailed status is displayed 809
• To display a summary of all the wireless switch s managed aps 809
• To display the detailed status of a specific ap 809
• 6 show wireless peer_switch configuration 810
• Description 810
• Dws 3160 series gigabit ethernet unified switch cli reference guide 810
• Example 810
• Format 810
• Parameters 810
• Restrictions 810
• Show wireless peer_switch configuration 810
• This show command is used to display the peer switch s group configuration mode 810
• To display the peer switch s group configuration mode 810
• 7 show wireless peer_switch configure status 811
• Description 811
• Example 811
• Format 811
• Parameters 811
• Restrictions 811
• 1 delete wireless ap_provisioning 812
• Chapter 91 wireless provisioning and mutual authentication command list 812
• Description 812
• Example 812
• Format 812
• Parameters 812
• Restrictions 812
• 2 config wireless ap_provision 813
• Description 813
• Example 813
• Format 813
• Parameters 813
• Restrictions 813
• 3 config wireless certificate_generate 814
• Description 814
• Dws 3160 series gigabit ethernet unified switch cli reference guide 814
• This command is used to initiate the regeneration of the x 09 certificate and rsa key on the wireless switch 814
• To configure the ap profile for a specified ap 814
• To configure the default profile for a specified ap 814
• To initiate the provisioning of all the entries present in the ap provisioning database 814
• To initiate the provisioning of the specified mac address in the ap provisioning database 814
• 4 config wireless certificate_request peer 815
• Description 815
• Example 815
• Format 815
• Parameters 815
• Restrictions 815
• 5 config wireless cluster exchange_certificate 816
• 6 config wireless mutual_authentication_mode 816
• Description 816
• Example 816
• Format 816
• Parameters 816
• Restrictions 816
• 7 config wireless re_provisioning_unmanaged 817
• Description 817
• Example 817
• Format 817
• Parameters 817
• Restrictions 817
• Example 818
• Format 818
• Parameters 818
• Restrictions 818
• 8 config wireless switch_provisioning 819
• 9 show wireless ap_provisioning 819
• Description 819
• Example 819
• Format 819
• Parameters 819
• Restrictions 819
• Example 820
• Format 820
• Parameters 820
• Restrictions 820
• 10 show wireless certificate_request 821
• 11 show wireless switch_provisioning 821
• Description 821
• Dws 3160 series gigabit ethernet unified switch cli reference guide 821
• Example 821
• Format 821
• Parameters 821
• Restrictions 821
• Show wireless certificate_request 821
• This command is used to display the status of switch certificate requests 821
• This command is used to display the switch s provisioning information 821
• To display the switch s certificate request status 821
• Example 822
• Format 822
• Parameters 822
• Restrictions 822
• Chapter 92 wireless qos command list 823
• 1 create wireless access_list 824
• Description 824
• Format 824
• 2 delete wireless access_list 825
• Description 825
• Example 825
• Format 825
• Parameters 825
• Restrictions 825
• 3 config wireless access_list ip extended 826
• Description 826
• Example 826
• Format 826
• Parameters 826
• Restrictions 826
• Parameters 827
• Example 831
• Restrictions 831
• 4 config wireless access_list ip name 832
• Description 832
• Format 832
• Parameters 832
• 5 config wireless access_list ip standard 837
• Between 0 and 63 837
• Description 837
• Dws 3160 series gigabit ethernet unified switch cli reference guide 837
• Ef specifies that the ip diffserv code point value will be set as ef other specifies that a custom ip diffserv code point value will be used 837
• Enter a custom ip diffserv code point value here this value must be 837
• Example 837
• Only administrators can issue this command 837
• Restrictions 837
• This command is used to configure the related parameters of standard wireless access lists 837
• To create a new rule for an existed ip named acl 837
• To delete a rule from an existed ip named acl 837
• To update the match_every value of a specified rule of a ip named acl to be false 837
• Example 838
• Format 838
• Parameters 838
• Restrictions 838
• 6 config wireless access_list ipv6 839
• Description 839
• Format 839
• Parameters 840
• Restrictions 843
• 7 config wireless access_list mac 844
• Description 844
• Dws 3160 series gigabit ethernet unified switch cli reference guide 844
• Ethertypekey appletalk arp ibmsna ipv4 844
• Example 844
• Format 844
• This command is used to configure the related parameters of mac wireless access lists 844
• To create a new rule for an existed ipv6 acl 844
• To delete a rule from an existed ipv6 acl 844
• To update the type value of a specified rule of an standard ipv6 acl to be permit 844
• Parameters 845
• Restrictions 846
• 8 create wireless diffserv class_map 847
• Description 847
• Dws 3160 series gigabit ethernet unified switch cli reference guide 847
• Enter the class map name used here this name can be up to 31 characters long 847
• Example 847
• Format 847
• Match_all ipv4 ipv6 847
• Parameters 847
• This command is used to create a diffserv class use the diffserv class commands to define wireless traffic classification 847
• This name is a case sensitive alphanumeric string that uniquely identifies a diffserv class the class map name default is reserved and must not be used 847
• To create a new rule for an existed mac acl 847
• To delete a rule from an existed mac acl 847
• To update the ethertype value of a specified rule of a mac acl to be ipv6 847
• 9 delete wireless diffserv class_map 848
• Description 848
• Example 848
• Format 848
• Parameters 848
• Restrictions 848
• 10 create wireless diffserv policy_map 849
• Description 849
• Example 849
• Format 849
• Parameters 849
• Restrictions 849
• 11 delete wireless diffserv policy_map 850
• 12 config wireless diffserv class_map 850
• Description 850
• Example 850
• Format 850
• Parameters 850
• Restrictions 850
• Parameters 851
• Example 855
• Restrictions 855
• 13 config wireless diffserv policy_map 856
• Description 856
• Format 856
• Parameters 856
• Example 858
• Restrictions 858
• 14 show wireless access_list 859
• Description 859
• Example 859
• Format 859
• Parameters 859
• Restrictions 859
• Dws 3160 series gigabit ethernet unified switch cli reference guide 860
• To display a summary of the ip access list 860
• To display all details of the rules that are defined for a mac acl 860
• Dws 3160 series gigabit ethernet unified switch cli reference guide 861
• To display a summary of the ipv6 access list 861
• To display all the details of the rules that are defined for an ip extended acl 861
• 15 show wireless diffserv 862
• Class_map optional specifies to display the diffserv class map s information 862
• Class_name specifies the name of diffserv class to be displayed 862
• Description 862
• Dws 3160 series gigabit ethernet unified switch cli reference guide 862
• Enter the name of diffserv class to be displayed here this name can be 862
• Format 862
• Parameters 862
• This command is used to display the wireless diffserv general status information a list of all the defined wireless diffserv classes all configuration information of the specified class a list of all defined wireless diffserv policies or all configuration information for the specified policy 862
• To display all the details of the rules that are defined for an ipv6 acl 862
• Dws 3160 series gigabit ethernet unified switch cli reference guide 863
• Enter the name of diffserv policy to be displayed here this name can be up to 31 characters long the name is a case sensitive alphanumeric string that uniquely identifies an existing wireless diffserv class 863
• Example 863
• Policy_map optional specifies to display the diffserv policy map s information 863
• Policy_name specifies the name of diffserv policy to be displayed 863
• Restrictions 863
• To display a list of all defined wireless diffserv classes 863
• To display configuration information of the specified class 863
• To display the wireless diffserv general status information 863
• Up to 31 characters long the name is a case sensitive alphanumeric string that uniquely identifies an existing wireless diffserv class 863
• Dws 3160 series gigabit ethernet unified switch cli reference guide 864
• To display a list of all defined wireless diffserv policy maps 864
• To display configuration information for the specified policy 864
• 1 delete wireless ap_rf_scan_list 865
• Chapter 93 wireless rf scan ap status command list 865
• Description 865
• Example 865
• Format 865
• Parameters 865
• Restrictions 865
• 1 config wireless channel_plan 866
• Chapter 94 wireless switch channel and power command list 866
• Description 866
• Format 866
• Parameters 866
• 2 config wireless power_plan 867
• Description 867
• Dws 3160 series gigabit ethernet unified switch cli reference guide 867
• Example 867
• Only administrators can issue this command 867
• Restrictions 867
• Start specifies to compute a new proposed wireless channel plan 867
• This command is used to configure the power plan mode the adjustment interval and manages manual power adjustments for the managed aps 867
• To apply the entire proposed wireless channel plan 867
• To configure the history depth 867
• To configure the wireless channel plan interval 867
• To configure the wireless channel plan mode 867
• Example 868
• Format 868
• Parameters 868
• Restrictions 868
• 3 show wireless channel_plan 869
• 4 show wireless channel_plan history 869
• Description 869
• Example 869
• Format 869
• Parameters 869
• Restrictions 869
• 5 show wireless channel_plan proposed 870
• Description 870
• Example 870
• Format 870
• Parameters 870
• Restrictions 870
• 6 show wireless power_plan 871
• A show wireless power_plan proposed 871
• Description 871
• Dws 3160 series gigabit ethernet unified switch cli reference guide 871
• Example 871
• Format 871
• Parameters 871
• Restrictions 871
• Show wireless power_plan 871
• This command is used to display the status and configuration for automatic power adjustments 871
• This command is used to specify the proposed power adjustments for a manual request to run the power algorithm the proposed power changes may be cleared or applied using the wireless power plan command 871
• To display the power plan global status 871
• Dws 3160 series gigabit ethernet unified switch cli reference guide 872
• Example 872
• Format 872
• Parameters 872
• Restrictions 872
• Show wireless power_plan proposed 872
• To display the proposed power plan 872
• Chapter 95 wireless switch command list 873
• 1 enable wireless 874
• 2 disable wireless 874
• Description 874
• Example 874
• Format 874
• Parameters 874
• Restrictions 874
• 3 create wireless discovery 875
• Description 875
• Example 875
• Format 875
• Parameters 875
• Restrictions 875
• 4 delete wireless discovery 876
• Description 876
• Example 876
• Format 876
• Parameters 876
• Restrictions 876
• 5 config wireless discovery 877
• 6 create wireless known_client 877
• Description 877
• Example 877
• Format 877
• Parameters 877
• Restrictions 877
• 7 delete wireless known_client 878
• Description 878
• Example 878
• Format 878
• Parameters 878
• Restrictions 878
• 8 config wireless known_client 879
• Description 879
• Example 879
• Format 879
• Parameters 879
• Restrictions 879
• 10 delete wireless oui_database 880
• 9 create wireless oui_database 880
• Description 880
• Example 880
• Format 880
• Parameters 880
• Restrictions 880
• 11 config wireless oui_database 881
• Description 881
• Example 881
• Format 881
• Parameters 881
• Restrictions 881
• 12 config wireless acknowledge_rogue 882
• 13 config wireless agetime 882
• Description 882
• Example 882
• Format 882
• Parameters 882
• Restrictions 882
• Example 883
• Restrictions 883
• 14 config wireless ap_authentication 884
• 15 config wireless ap_auto_upgrade 884
• Description 884
• Example 884
• Format 884
• Parameters 884
• Restrictions 884
• 16 config wireless ap_client_qos 885
• Description 885
• Example 885
• Format 885
• Parameters 885
• Restrictions 885
• 17 config wireless ap_validation 886
• 18 config wireless auto_ip_assign 886
• Description 886
• Example 886
• Format 886
• Parameters 886
• Restrictions 886
• 19 config wireless client roam_timeout 887
• 20 config wireless cluster priority 887
• Description 887
• Example 887
• Format 887
• Parameters 887
• Restrictions 887
• 21 config wireless country_code 888
• Description 888
• Example 888
• Format 888
• Parameters 888
• Restrictions 888
• 22 config wireless dist_tunnel 889
• Description 889
• Format 889
• Parameters 889
• 23 config wireless ip_control_port 890
• Description 890
• Example 890
• Format 890
• Parameters 890
• Restrictions 890
• 24 config wireless mac_authentication_mode 891
• 25 config wireless peer_group 891
• Description 891
• Example 891
• Format 891
• Parameters 891
• Restrictions 891
• 26 config wireless radius 892
• Description 892
• Example 892
• Format 892
• Parameters 892
• Restrictions 892
• 27 config wireless static_ip 893
• 28 config wireless trap 893
• Description 893
• Example 893
• Format 893
• Parameters 893
• Restrictions 893
• 29 config wireless tunnel_mtu 894
• Description 894
• Example 894
• Format 894
• Restrictions 894
• 30 clear wireless statistics 895
• Description 895
• Example 895
• Format 895
• Parameters 895
• Restrictions 895
• 31 show wireless 896
• Description 896
• Example 896
• Format 896
• Parameters 896
• Restrictions 896
• 32 show wireless agetime 897
• Ad hoc client statue age hours displays how long to continue to display an ad hoc client in 897
• Ap failure status age hours displays how long to continue to display a failed ap in the 897
• Description 897
• Display parameters that can be found in the examples 897
• Dws 3160 series gigabit ethernet unified switch cli reference guide 897
• Format 897
• Parameters 897
• Rf scan status age hours displays the clients authenticated to a specific configuration detected clients age hours displays how long to keep an entry in the detected client status 897
• Show wireless agetime 897
• Status list since it was last detected 897
• The status list since it was last detected 897
• This command is used to display the configured age times for the status database entries 897
• 33 show wireless ap_capability 898
• Description 898
• Example 898
• Format 898
• Parameters 898
• Restrictions 898
• Dws 3160 series gigabit ethernet unified switch cli reference guide 899
• Example 899
• To display a summary of access point hardware type capabilities 899
• To display the ap dual boot support table 899
• To display the ap image capability table 899
• To display the detailed hardware type capability 899
• 34 show wireless ap_image availability 900
• 35 show wireless country_code 900
• Description 900
• Dws 3160 series gigabit ethernet unified switch cli reference guide 900
• Example 900
• Format 900
• Parameters 900
• Restrictions 900
• Show wireless ap_image availability 900
• This command is used to display the country codes configurable on the wireless switch 900
• This command is used to display the version information of ap images stored on the switch 900
• To display ap image version information 900
• 36 show wireless discovery 901
• Description 901
• Dws 3160 series gigabit ethernet unified switch cli reference guide 901
• Example 901
• Format 901
• Parameters 901
• Restrictions 901
• Show wireless country_code 901
• Show wireless discovery ip_list vlan_list 901
• This command is used to display the configured wireless switch discovery methods the configured ip polling list for layer 3 discovery and the configured vlan id list for layer 2 discovery 901
• To display the country codes configurable on the wireless switch 901
• Dws 3160 series gigabit ethernet unified switch cli reference guide 902
• Example 902
• If no parameter is specified information about the configured the wireless switch s discovery methods will be displayed 902
• Ip_list specifies that the layer 3 discovery ip list and polling status will be displayed vlan_list specifies that the layer 2 discovery vlan list will be displayed 902
• Parameters 902
• Restrictions 902
• To display information about the configured the wireless switch s discovery methods 902
• To display information about the configured vlan id list for layer 2 discovery 902
• To display information about the configured wireless switch s ip polling list for layer 3 discovery 902
• 37 show wireless dist_tunnel 903
• Description 903
• Example 903
• Format 903
• Parameters 903
• Restrictions 903
• 38 show wireless known_client 904
• Description 904
• Dws 3160 series gigabit ethernet unified switch cli reference guide 904
• Example 904
• Format 904
• Parameters 904
• Restrictions 904
• Show wireless known_client 904
• This command is used to display the content of the local known client database 904
• To display the content of the local known client database 904
• To display the wireless distributed tunnel s statistics 904
• 39 show wireless mac_authentication_mode 905
• Description 905
• Example 905
• Format 905
• Parameters 905
• Restrictions 905
• 40 show wireless multicast tx_rates 906
• Description 906
• Example 906
• Format 906
• Parameters 906
• Restrictions 906
• 41 show wireless oui_database 907
• Description 907
• Dws 3160 series gigabit ethernet unified switch cli reference guide 907
• Example 907
• Format 907
• If no parameter is specified then all entries will be displayed 907
• Mac address of the vendor ap or client here 907
• Optional enter the oui value composed of the higher three octets of the ethernet 907
• Parameters 907
• Restrictions 907
• This command is used to display all the oui entries created by the administrator in the local oui database 907
• To display all the oui entries created by the administrator in the local oui database 907
• 42 show wireless radius 908
• 43 show wireless rates 908
• Description 908
• Example 908
• Format 908
• Parameters 908
• Restrictions 908
• A specifies that tx rates of the physical mode 802 1a will be displayed bg specifies that tx rates of the physical mode 802 1b g will be displayed 909
• Dws 3160 series gigabit ethernet unified switch cli reference guide 909
• Example 909
• Parameters 909
• Restrictions 909
• To display tx rates of the physical mode 802 1a 909
• To display tx rates of the physical mode 802 1b g 909
• 44 show wireless statistics 910
• 45 show wireless status 910
• Description 910
• Example 910
• Format 910
• Parameters 910
• Restrictions 910
• 46 show wireless switch 911
• Description 911
• Dws 3160 series gigabit ethernet unified switch cli reference guide 911
• Enter the ip address of the wireless switch in the wireless system here local specifies that local wireless switch in the wireless system statistics optional specifies that current wireless switch statistics will be displayed client optional specifies to display summarized data for all ap associated client s 911
• Example 911
• Format 911
• Local statistics client 911
• Parameters 911
• Restrictions 911
• This command is used to display the wireless switch s status information 911
• To display the configured global wireless switch s status parameters 911
• Configuration and status 912
• Dws 3160 series gigabit ethernet unified switch cli reference guide 912
• Example 912
• Restrictions 912
• To display the local switch s client information 912
• To display the local switch s statistics 912
• To display the local switch s summary 912
• 47 show wireless trap 913
• Description 913
• Dws 3160 series gigabit ethernet unified switch cli reference guide 913
• Example 913
• Format 913
• Parameters 913
• Restrictions 913
• Show wireless trap 913
• This command is used to display the wireless trap status on the switch 913
• To display the wireless trap status on the switch 913
• 48 show wireless tunnel_mtu 914
• Description 914
• Example 914
• Format 914
• Parameters 914
• Restrictions 914
• 1 config wireless wids_security admin_config_rogue enable 915
• Chapter 96 wireless wids ap rf security command list 915
• Description 915
• Format 915
• 2 config wireless wids_security ap_chan_illegal 916
• 3 config wireless wids_security ap_de_auth_attack 916
• Description 916
• Example 916
• Format 916
• Parameters 916
• Restrictions 916
• 4 config wireless wids_security client auth_with_unknown_ap 917
• Description 917
• Example 917
• Format 917
• Parameters 917
• Restrictions 917
• 5 config wireless wids_security client configured_auth_rate 918
• 6 config wireless wids_security client configured_deauth_rate 918
• Description 918
• Example 918
• Format 918
• Parameters 918
• Restrictions 918
• 7 config wireless wids_security client configured_probe_rate 919
• Description 919
• Example 919
• Format 919
• Parameters 919
• Restrictions 919
• 8 config wireless wids_security client known_client_database 920
• 9 config wireless wids_security client known_db_location 920
• Description 920
• Example 920
• Format 920
• Parameters 920
• Restrictions 920
• 10 config wireless wids_security client max_auth_failure 921
• Description 921
• Example 921
• Format 921
• Parameters 921
• Restrictions 921
• 11 config wireless wids_security client oui_database 922
• 12 config wireless wids_security client rogue_det_trap_interval 922
• Description 922
• Example 922
• Format 922
• Parameters 922
• Restrictions 922
• 13 config wireless wids_security client threat_mitigation 923
• 14 config wireless wids_security client threshold_auth_failure 923
• Description 923
• Example 923
• Format 923
• Parameters 923
• Restrictions 923
• 15 config wireless wids_security client threshold_interval_auth 924
• Description 924
• Example 924
• Format 924
• Parameters 924
• Restrictions 924
• 16 config wireless wids_security client threshold_interval_deauth 925
• 17 config wireless wids_security client threshold_interval_prob 925
• Description 925
• Example 925
• Format 925
• Parameters 925
• Restrictions 925
• 18 config wireless wids_security client threshold_value_auth 926
• Description 926
• Example 926
• Format 926
• Parameters 926
• Restrictions 926
• 19 config wireless wids_security client threshold_value_deauth 927
• 20 config wireless wids_security client threshold_value_prob 927
• Description 927
• Example 927
• Format 927
• Parameters 927
• Restrictions 927
• 21 config wireless wids_security fakeman_ap_chan_invalid 928
• Description 928
• Example 928
• Format 928
• Parameters 928
• Restrictions 928
• 22 config wireless wids_security fakeman_ap_managemed_ssid 929
• 23 config wireless wids_security fakeman_ap_no_ssid 929
• Description 929
• Example 929
• Format 929
• Parameters 929
• Restrictions 929
• 24 config wireless wids_security managed_ap_ssid_invalid 930
• 25 config wireless wids_security managed_ssid_secu_bad 930
• Description 930
• Example 930
• Format 930
• Parameters 930
• Restrictions 930
• 26 config wireless wids_security rogue_det_trap_interval 931
• Description 931
• Example 931
• Format 931
• Parameters 931
• Restrictions 931
• 27 config wireless wids_security standalone_cfg_invalid 932
• 28 config wireless wids_security unknown_ap_managed_ssid 932
• Description 932
• Example 932
• Format 932
• Parameters 932
• Restrictions 932
• 29 config wireless wids_security unmanaged_ap_wired 933
• Description 933
• Example 933
• Format 933
• Parameters 933
• Restrictions 933
• 30 config wireless wids_security wired_detection_interval 934
• 31 show wireless wids_security 934
• Description 934
• Example 934
• Format 934
• Parameters 934
• Restrictions 934
• 32 show wireless wids_security client 935
• Description 935
• Dws 3160 series gigabit ethernet unified switch cli reference guide 935
• Example 935
• Format 935
• Parameters 935
• Restrictions 935
• Show wireless wids_security client 935
• This command is used to display the configured wireless wids security settings for a client 935
• To display the wids client security configuration 935
• 33 show wireless wids_security client rogue_test_descriptions 936
• Description 936
• Dws 3160 series gigabit ethernet unified switch cli reference guide 936
• Example 936
• Format 936
• Parameters 936
• Restrictions 936
• Show wireless wids_security client rogue_test_descriptions 936
• This command is used to display to display the wids client rogue classification test identifier descriptions 936
• To display the wids client rogue classification test descriptions 936
• 34 show wireless wids_security de_authentication 937
• Description 937
• Dws 3160 series gigabit ethernet unified switch cli reference guide 937
• Example 937
• Format 937
• Parameters 937
• Restrictions 937
• Show wireless wids_security de_authentication 937
• This command is used to display information about aps against which the cluster controller initiated a de authentication attack 937
• To display information about aps against which the cluster controller initiated a de authentication attack 937
• 35 show wireless wids_security rogue_test_descriptions 938
• Description 938
• Dws 3160 series gigabit ethernet unified switch cli reference guide 938
• Example 938
• Format 938
• Parameters 938
• Restrictions 938
• Show wireless wids_security rogue_test_descriptions 938
• This command is used to display the wids ap rogue classification test identifier descriptions 938
• To report the status of the wids feature 938
• 1 enable password_recovery 939
• 2 disable password_recovery 939
• Chapter 97 password recovery command list 939
• Description 939
• Example 939
• Format 939
• Parameters 939
• Restrictions 939
• 3 show password_recovery 940
• Description 940
• Example 940
• Format 940
• Parameters 940
• Restrictions 940
• Appendix a mitigating arp spoofing attacks using packet content acl 941
• How address resolution protocol works 941
• How arp spoofing attacks a network 944
• Prevent arp spoofing via packet content acl 946
• Configuration 947
• Appendix b password recovery procedure 949
• Appendix c system log entries 951
• Dws 3160 series gigabit ethernet unified switch cli reference guide 951
• The following table lists all possible entries and their corresponding meanings that will appear in the system log of this switch 951
• Dws 3160 series gigabit ethernet unified switch cli reference guide 952
• Dws 3160 series gigabit ethernet unified switch cli reference guide 953
• Dws 3160 series gigabit ethernet unified switch cli reference guide 954
• Dws 3160 series gigabit ethernet unified switch cli reference guide 955
• Dws 3160 series gigabit ethernet unified switch cli reference guide 956
• Dws 3160 series gigabit ethernet unified switch cli reference guide 957
• Dws 3160 series gigabit ethernet unified switch cli reference guide 958
• Dws 3160 series gigabit ethernet unified switch cli reference guide 959
• Dws 3160 series gigabit ethernet unified switch cli reference guide 960
• Dws 3160 series gigabit ethernet unified switch cli reference guide 961
• Dws 3160 series gigabit ethernet unified switch cli reference guide 962
• Dws 3160 series gigabit ethernet unified switch cli reference guide 963
• Dws 3160 series gigabit ethernet unified switch cli reference guide 964
• Appendix d trap entries 965
• Dws 3160 series gigabit ethernet unified switch cli reference guide 965
• This table lists the trap logs found on the switch 965
• Dws 3160 series gigabit ethernet unified switch cli reference guide 966
• Dws 3160 series gigabit ethernet unified switch cli reference guide 967
• Dws 3160 series gigabit ethernet unified switch cli reference guide 968
• Dws 3160 series gigabit ethernet unified switch cli reference guide 969
• Appendix e radius attributes assignment 970
• Appendix f wireless switch specific 979