Home
Главная
Korting
Вытяжка
KHC6954X
Инструкция по эксплуатации Страница: 8

Korting KHC6954X Инструкция по эксплуатации онлайн [8/40] 173552

• If your appliance does not have the INTENSIVE speed

function, press key E for two seconds and it will be activated

for 10 minutes after which it will return to the previously set

speed. When the function is active the LED  ashes. To interrupt

it before the 10 minutes have expired press key E again.

• By pressing key F for two seconds (with the hood switched

o ) the “clean air” function is activated. This function switches

the appliance on for ten minutes every hour at the  rst speed.

As soon as this function is activated the motor starts up at the

 rst speed for ten minutes, During this time key F and key C

must  ash at the same time.

After ten minutes the motor switches o and the LED of key

F remains switched on with a  xed light until the motor starts

up again at the  rst speed after  fty minutes and keys F and

C start to  ash again for ten minutes and so on.

By pressing any key for the exclusion of the hood light the

hood will return immediately to its normal functioning (e.g.

if key D is pressed the “clean air” function is deactivated and

the motor moves to the 2nd speed straight away. By pressing

key B the function is deactivated).

(*) The “automatic stop timer” delays stopping of the hood,

which will continue functioning for 15 minutes at the operat-

ing speed set at the time this function is activated.

• Active carbon/grease  lter saturation:

- When button A  ashes at a frequency of 2 seconds, the

grease  lters must be cleaned.

- When button A  ashes at a frequency of 0.5 seconds, the

carbon  lters must be replaced.

After the clean  lter has been replaced, the electronic memory

must be reset by pressing button A for approximately 5

seconds, until the light on the button stops  ashing.

• Commands mechanical: (Fig.13 A-B-C)

the key symbols are explained below:

A = LIGHT

B = OFF

C = SPEED I

D = SPEED II

E = SPEED III

G = MOTOR WORKING indicator

• Commands: (Fig.14)

Push-button A = on/o lights switch

Push-button B = on/o cooker hood switch. The appliance

switches on at speed level 1, If the cooker hood is on depress

the push-button for 2 sec. to switch o the cooker hood. If

the cooker hood is at speed level 1 it will not be necessary

to depress the push-button to switch the cooker hood o .

Decreases the motor speed.

Display C = indicates the motor speed level selected and

activates the timer.

Push-button D = switches on the cooker hood. Increases the

motor speed. Touching the key at 3rd speed, the intensive

function runs for 10’, then the appliance go back to work at the

original speed. During this function the display blinks.

Key E = The Timer times the functions on activation for 15

minutes, after which they are switched o . The Timer is deac-

tivated by re-pressing Key E. When the Timer is activated the

decimal point must  ash on the display. The Timer cannot be

activated if the intensive speed is functioning.

The “clean air” function is activated by pressing key E for 2

seconds when the appliance is switched o . This switches the

motor on for 10 minutes every hour at the  rst speed. During

functioning a rotary movement of the peripheral segments

must be visualised on the display. When this time has passed

the motor switches o and the  xed letter “C” must be visu-

alised on the display until the motor re-starts after 50 minutes

for another 10 minutes and so on. Press any key apart from

the light keys to return to normal functioning. Press key E to

deactivate the function.

• Active carbon/grease  lter saturation:Fig.14

- When display item C  ashes, at a speed where it alternates

with the letter F (e.g. 1 and F), the grease  lters must be

washed.

- When display item C  ashes, at a speed where it alternates

with the letter A (e.g. 1 and A), the carbon  lters must be

replaced.

After the clean filter has been positioned correctly, the

electronic memory must be reset by pressing button A for

approximately 5 seconds, until the indication F or A shown

on the display C stops  ashing.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY

FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE

ABOVE WARNINGS.

- 8 -

Korting KHC6954X Инструкция по эксплуатации онлайн [8/40] 173552

Содержание

Похожие устройства