Netgear JNR3210 — решение проблем с беспроводным маршрутизатором N300 [110/122]

Превью страниц Страница 110 / 122

Troubleshooting

110

N300 Wireless Gigabit Router with USB JNR3210

Changes Not Saved

If the router does not save the changes you make in the router interface, check the following:

• When entering configuration settings, always click the Apply button before moving to

another screen or tab, or your changes are lost.

• Click the Refresh or Reload button in the web browser. The changes might have

occurred, but the old settings might be in the web browser’s cache.

Wireless Connectivity

If you are having trouble connecting wirelessly to the router, try to isolate the problem.

• Does the wireless device or computer that you are using find your wireless network?

If not, check the Wireless LEDs on the front of the router. It should be lit. If it is not, you

can press the WiFi On/Off button on the back of the router to turn the router’s wireless

radio back on.

If you disabled the router’s SSID broadcast, then your wireless network is hidden and

does not show up in your wireless client’s scanning list. (By default, SSID broadcast is

enabled.)

• Does your wireless device support the security that you are using for your wireless

network (WPA or WPA2)?

• If you want to view the wireless settings for the router, use an Ethernet cable to connect a

computer to a LAN port on the router. Then log in to the router, and select Wireless see

(

Basic Wireless Settings on page 23).

Note: Be sure to click Apply if you make changes.

Wireless Signal Strength

If your wireless device finds your network, but the signal strength is weak, check these

conditions:

• Is your router too far from your computer, or too close? Place your computer near the

router, but at least 6 feet away, and see whether the signal strength improves.

• Is your wireless signal blocked by objects between the router and your computer?