Netgear JNR3210 — настройка беспроводного маршрутизатора: основные шаги и советы [24/122]

Превью страниц Страница 24 / 122

genie Basic Settings

N300 Wireless Gigabit Router with USB JNR3210

If you use a wireless computer to change the wireless network name (SSID) or other wireless

security settings, you are disconnected when you click Apply. To avoid this problem, use a

computer with a wired connection to access the router.

1. On

the Basic Home screen, select Wireless to display the Wireless Settings screen.

The screen sections, settings, and procedures are explained in the following sections.

2. Make any changes tha

t are needed, and click Apply to save your settings.

3. Set up and test your

wireless devices and computers to make sure that they can connect

wirelessly. If they do not, check the following:

• Is you

r wireless device or computer connected to your network or another wireless

network in your area? Some wireless devices automatically connect to the first open

network (without wireless security) that they discover.

• Does

your wireless device or computer show up on the Attached Devices screen? If it

does, then it is connected to the network.

• If you

are not sure what the network name (SSID) or password is, look on the label on

the bottom of your router.

Wireless Settings Screen Fields

Region Selection

The location where the router is used. Select from the countries in the list. Note that in the

United States, the region is fixed to United States and is not changeable.

Wireless Network

Enable SSID Broadcast. This setting allows the router to broadcast its SSID so wireless

stations can see this wireless name (SSID) in their scanned network lists. This check box is