![ECS Elitegroup HDC-M/C-60 [7/60] Bios firmware](/img/pdf.png)
ECS Elitegroup HDC-M/C-60 [7/60] Bios firmware
![ECS Elitegroup HDC-M/C-60 [7/60] Bios firmware](/views2/1212413/page7/bg7.png)
3
Introducing the Motherboard
Audio
This motherboard may support the following Audio chipset:
• 5.1 Channel High Definition Audio Codec
• ADCs support 44.1k/48k/96kHz sample rate
• Meets Microsoft WLP 3.10 Vista premium and mobile PCs audio
requirements
• Direct Sound 3D
TM
compatible
1.Some hardware specifications and software items are subject to change
without prior notice.
2.Due to chipset limitation, we recommend that motherboard be oper-
ated in the ambiance between 0 and 50°C.
The motherboard comes with the following expansion options:
• Two PCI slots
• One PCI Express x16 slot (with x4 mode)
• Four 7-pin SATA connectors
Expansion Options
• One PS/2 keyboard and PS/2 mouse connect port
• One DVI port (optional HDMI port)
• One VGA port
• Six USB 2.0 ports
• One LAN port
• Audio jacks for microphone, line-in and line-out
The motherboard has a full set of I/O ports and connectors:
Integrated I/O
The firmware can also be used to set parameters for different processor clock
speeds.
• Power management
• Wake-up alarms
• CPU parameters
• CPU and memory timing
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure many system
features including the following:
Содержание
- Copyright 1
- Disclaimer 1
- Federal communications commission fcc 1
- Preface 1
- Trademark recognition 1
- About the manual 2
- Canadian department of communications 2
- Declaration of conformity 2
- Preface 2
- Chapter 1 1 3
- Chapter 2 7 7 7 7 7 3
- Chapter 3 21 3
- Connecting i o devices 7 connecting case components 8 3
- Installing hardware 0 3
- Installing the motherboard 7 safety precautions 7 choosing a computer case installing the motherboard in a case checking jumper settings 3
- Introducing the motherboard 1 introduction feature motherboard components 3
- Preface i 3
- Tttttable of contents able of contents able of contents able of contents able of contents 3
- Using bios 2 3
- Using bios 21 about the setup utility 21 3
- Chapter 1 introducing the motherboard 5
- Introducing the motherboard 5
- Introduction 5
- Chipset 6
- Feature 6
- Introducing the motherboard 6
- Memory 6
- Onboard lan optional 6
- Processor 6
- Bios firmware 7
- Expansion options 7
- Integrated i o 7
- Introducing the motherboard 7
- Introducing the motherboard 8
- Specifications 8
- Introducing the motherboard 9
- Motherboard components 9
- Table of motherboard components 9
- Chapter 2 installing the motherboard 11
- Choosing a computer case 11
- Installing the motherboard 11
- Installing the motherboard in a case 11
- Safety precautions 11
- Checking jumper settings 12
- Installing the motherboard 12
- Setting jumpers 12
- Checking jumper settings 13
- Installing the motherboard 13
- Jumper settings 13
- Ddr3 sdram memory module table 14
- Installation procedure 14
- Installing hardware 14
- Installing memory modules 14
- Installing the motherboard 14
- Expansion slots 15
- Installing add on cards 15
- Installing the motherboard 15
- Installing the motherboard 16
- Connecting optional devices 17
- F_audio front panel audio header 17
- Installing the motherboard 17
- Sata1 4 serial ata connectors 17
- Case chassis intrusion detect header 18
- Com onboard serial port header 18
- Connect a serial port extension bracket to this header to add a second serial port to your system 18
- F_usb1 3 front panel usb 2 headers 18
- Installing the motherboard 18
- Please make sure that the usb cable has the same pin assignment as indicated above a different pin assignment may cause damage or system hang up 18
- The motherboard has six usb 2 ports installed on the rear edge i o port array additionally some computer cases have usb 2 ports at the front of the case if you have this kind of case use auxiliary usb 2 connector to connect the front mounted ports to the motherboard 18
- This detects if the chassis cover has been removed this function needs a chassis equipped with instrusion detection switch and needs to be enabled in bios 18
- Installing the motherboard 19
- Lpt onboard parallel port header 19
- Spdifo spdif out header 19
- Tpm optional tpm module header 19
- About sata connectors 20
- Installing a sata hard drive 20
- Installing serial ata hard drives 20
- Installing the motherboard 20
- Connecting i o devices 21
- Installing the motherboard 21
- Connecting 24 pin power cable 22
- Connecting case components 22
- Installing the motherboard 22
- Atx_power atx 24 pin power connector 23
- Cpu_fan cpu cooling fan power connector 23
- Installing the motherboard 23
- Spk internal speaker header 23
- Sys_fan system cooling fan power connector 23
- Connecting pins 1 and 3 to a front panel mounted led provides visual indication that data is being read from or written to the hard drive for the led to function properly an ide drive should be connected to the onboard ide interface the led will also show activity for devices connected to the scsi hard drive activity led connector 24
- Connecting pins 2 and 4 to a single or dual color front panel mounted led provides power on off sleep and message waiting indication 24
- Front panel header 24
- Hard drive activity led 24
- Installing the motherboard 24
- Power sleep message waiting led 24
- Power switch 24
- Reset switch 24
- Supporting the power on off function requires connecting pins 6 and 8 to a momen tary contact switch that is normally open the switch should maintain contact for at least 50 ms to signal the power supply to switch on or off the time requirement is due to internal de bounce circuitry after receiving a power on off signal at least two seconds elapses before the power supply recognizes another on off signal 24
- Supporting the reset function requires connecting pin 5 and 7 to a momentary contact switch that is normally open when the switch is closed the board resets and runs post 24
- The front panel header f_panel provides a standard set of switch and led headers commonly found on atx or micro atx cases refer to the table below for information 24
- This concludes chapter 2 the next chapter covers the bios 24
- About the setup utility 25
- Chapter 3 using bios 25
- Entering the setup utility 25
- The standard configuration 25
- Using bios 25
- Resetting the default cmos values 26
- Using bios 26
- Bios navigation keys 27
- Using bios 27
- Default 28
- Language 28
- Using bios 28
- Advanced 29
- Using bios 29
- Main menu 30
- System date time the date and time items show the current date and time on the computer if you are running a windows os these items are automatically updated whenever you make changes to the windows date and time properties utility 30
- System language english this item is used to set the language 30
- This menu shows the information of bios and enables you to set the system language date and time 30
- Using bios 30
- Advanced menu 31
- Lan configuration 31
- Network stack enabled use this item to enable or disable uefi network stack ipv4 6 pxe support enabled use these items to enable ipv4 6 pxe boot support if disabled ipv4 6 pxe boot option will not be created 31
- Onboard lan controller enabled use this item to enable or disable the onboard lan 31
- The advanced menu items allow you to change the settings for the cpu and other system 31
- The item in the menu shows the lan related information that the bios automatically detects 31
- To return to the advanced menu page 31
- Using bios 31
- Cpu smart fan control enabled this item allows you to enable or disable the control of the cpu fan speed by changing the fan voltage 32
- On motherboards support hardware monitoring this item lets you monitor the parameters for critical voltages temperatures and fan speeds 32
- Pc health status 32
- To view the following screen smart fan function 32
- Using bios 32
- Using bios 33
- Eup function enabled this item allows user to enable or disable eup support 34
- Power led type dual color led this item allows you to choice the power led type 34
- Power management setup 34
- Resume by ps2 kb s3 disabled this item enables or disables you to allow keyboard activity to awaken the system from power saving mode resume by ps2 ms s3 disabled this item enables or disables you to allow mouse activity to awaken the system from power saving mode 34
- Resume by ring disabled 34
- Resume by usb s3 disabled this item allows you to enable or disable the usb device wakeup function from s3 mode 34
- The system can be turned off with a software command if you enable this item the system can automatically resume if there is an incoming call on the modem you must use an atx power supply in order to use this feature 34
- This page sets up some parameters for system power management operation 34
- To return to the advanced menu page 34
- Using bios 34
- Acpi settings 35
- Acpi sleep state s3 suspend to ram this item allows user to enter the acpi s3 suspend toram sleep state default 35
- The item in the menu shows the highest acpi sleep state when the system enters suspend 35
- To return to the advanced menu page 35
- Using bios 35
- Amd c q enabled this item enables or disables the cpu c q function 36
- Cpu configuration 36
- Dual core running 1623 mhz 1300 mv this item shows the information of the current cpu frequency voltage 36
- L1 data cache 32 kb 2 way this item shows cpu l1 cache 36
- L1 instruction cache 32 kb 8 way this item shows cpu l1 cache 36
- L2 cache 512 kb 16 way this item shows cpu l2 cache 36
- Max speed 1600 mhz intended speed 1600 mhz this item shows the maximum intended speed of the cpu 36
- Microcode patch level 5000028 this item shows the microcode revision 36
- Min speed 800 mhz this item shows the minimum speed of the cpu 36
- No l3 cache present this item shows cpu l3 cache 36
- Sb clock spread spectrum enabled this item enables or disables the sb clock spread spectrum 36
- The item in the menu shows the cpu configuration 36
- To return to the advanced menu page 36
- Using bios 36
- Sata configuration 37
- Sata mode ide use this item to select sata mode 37
- Sata port1 4 not present intel ssdsa2m0 80 gb this motherboard supports four sata channels and each channel allows one sata device to be installed use these items to configure each device on the sata channel and each channel allows one sata device to be installed use these items to configure each device on the sata channel 37
- Serial ata controller enabled 37
- To return to the advanced menu page 37
- Use this item to enabled or disable the onchip sata channel 37
- Use this item to show the mode of serial ata configuration options 37
- Using bios 37
- All usb devices enabled use this item to enable or disable support for all usb devices 38
- Legacy usb support enabled use this item to enable or disable support for legacy usb devices 38
- Super io configuration 38
- To return to the advanced menu page 38
- Usb configuration 38
- Use this item to show the information of super io configuration 38
- Use this item to show the information of usb configuration 38
- Using bios 38
- Change settings auto 39
- Device settings io 3f8h irq 4 39
- Serial port 0 configuration use this item to show the information of serial part 0 configuration 39
- Serial port enabled 39
- This item allows you to enable or disable serial port 39
- This item shows the information of the device settings 39
- To return to the super io configuration menu page 39
- Use this item to change device settings 39
- Using bios 39
- Change settings auto use this item to change the settings automatically 40
- Device mode standard and b1 dire 40
- Device settings io 3f8h irq 5 use this item to setting devices parameter 40
- Parallel port configuration use this item to show the information of parallel port configuration 40
- Parallel port enabled use this item to enable or disable the parallel lpt or lpte port 40
- This item allows you to select the device mode for a better operation environment 40
- To return to the advanced menu page 40
- To return to the super io configuration menu page 40
- Using bios 40
- To return to the advanced menu page 41
- Tpm support disabled use this item to enable or disable the tpm port o s will not show tpm reset of platform is required 41
- Trusted computing 41
- Use this item to show the information of trusted computing configuration 41
- Using bios 41
- And view the following screen 42
- Azalia internal hdmi codec enabled 42
- Chipset menu 42
- Igd memory auto 42
- The chipset menu items allows you to change the settings for the north bridge chipset south bridge chipset and other system 42
- This item allows you to enable or disable the azalia internal hdmi codec 42
- This item shows the information of the igd internal graphics device memory 42
- To return to the chipset menu page 42
- Using bios 42
- Azalia hd audio enabled 43
- Case open warning disabled 43
- Chassis opened no 43
- Restore ac power loss power off 43
- This item enables or disables azalia hd audio 43
- This item enables or disables the warning if the case is opened up and the item below indicates the current status of the case 43
- This item indicates whether the case has been opened 43
- This item specifies what state to go to when power is re applied after a power failure g3 state 43
- To view the following screen 43
- Using bios 43
- Cas latency tcl 8 clk 44
- M i b iii menu 44
- Memory clock auto 44
- Memory mode auto 44
- Ras active time tras 20 clk 44
- Ras to cas delay trcd 8 clk 44
- Row precharge time trp 8 clk 44
- This item determines the operation of ddr sdram memory cas column address strobe it is recommanded that you leave this item at the default values the 2t setting requires faster memory that specifically supports this mode 44
- This item is used to set the memory clock 44
- This item is used to set the memory mode 44
- This item specifies row precharge to active or auto refresh of the same bank 44
- This item specifies the ras active time 44
- This item specifies the ras to cas delay to rd wr command to the same bank 44
- This page enables you to set the clock speed and system bus for your system the clock speed and system bus are determined by the kind of processor you have installed in your system 44
- Using bios 44
- Boot configuration this item shows the information of the boot configuration 45
- Boot menu 45
- Boot mode select legacy use this item to select boot mode 45
- Boot option 1 2 3 4 5 6 7 these items show the boot priorities 45
- Bootup numlock state on this item enables you to select numlock state 45
- Launch pxe oprom disabled the item enables or disables launch pxe option rom launch storage oprom enabled the item enables or disables launch storage option rom 45
- Operation system select windows7 or other os this item is used to select the operation system 45
- Quiet boot enabled this item enables or disables quiet boot 45
- Set boot priority this item enables you to set boot priority for all boot devices 45
- This page enables you to set the keyboard numlock state 45
- Using bios 45
- Boot option filter uefi and legacy this option controls what devices system can boot to 46
- Csm parameters oprom execution boot options filter etc 46
- Launch csm always 46
- Launch pxe oprom policy do not launch this controls the execution of uefi and legacy pxe oprom 46
- Launch storage oprom policy legacy only this controls the execution of uefi and legacy storage oprom 46
- Launch video oprom policy legacy only this controls the execution of uefi and legacy video oprom 46
- Other pci device rom priority legacy oprom for pci devices other than network mass storage or video defines which oprom to launch 46
- This option controls if csm will be launched 46
- To see the submenu 46
- To view the following screen 46
- Using bios 46
- Administrator password status not installed this item shows adiministrator password installed or not 47
- Secure boot enabled this item is used to control the secure boot flow it is possible only if system runs in user mode secure boot mode custom this item is used to select secure boot mode when you select standard mode secure boot policy is fixed when you select custom mode the image execution policy and secure boot key databases are changeable 47
- Secure boot state disabled this item allows you to enable or disable the secure boot state 47
- Security menu 47
- System mode state setup this item shows system mode setup or not 47
- This page enables you to set setup administrator and password 47
- User password status not installed this item shows user password installed or not 47
- Using bios 47
- Image execution policy scroll to this item to view the following screen 48
- Internal fv option rom removable media fixed media always execute deny execute these items allow you to select image execution policy per device path on security violation only users logged with administrative password can exercise query user policy setting 48
- To return to the security menu page 48
- Using bios 48
- Append an entry to kek db dbx this item launches the file browser to append new signature database from the file the file data must be formatted as efi variable with timebased authenticated header 49
- Authorized signature database db this item shows the information of the authorized signature database 49
- Default key provisioning disabled this item enables or disables you to force oem default secure boot keys if system is in setup mode 49
- Delete the pk kek db dbx this item is used to delete the variable key exchange key database kek this item shows the information of the key exchange key database 49
- Forbidden signature database dbx this item shows the information of the forbidden signature database 49
- Get pk kek db dbx to file this item is used to store secure variable to a file with a matching name in selected file system s root 49
- Key management scroll to this item to view the following screen 49
- Platform key pk this item shows the information of the platform key set pk kek db dbx from file this item launches the file browser to set efi variable from the file the file data must be formatted as efi variable with timebased authenticated header 49
- Using bios 49
- Back to ez mode this item enables you to back to ez mode 50
- Discard changes and exit this item enables you to exit system setup without saving any changes 50
- Discard changes and reset this item enables you to reset system setup without saving any changes 50
- Discard changes this item enables you to discard any changes that you have made 50
- Restore defaults this item enables you to restore the system defaults 50
- Restore user defaults this item enables you to restore user defaults to all the setup options 50
- Save as user defaults this item enables you to save the changes that you have made as user defaults 50
- Save changes and exit this item enables you to exit system setup after saving the changes 50
- Save changes and reset this item enables you to reset the system setup after saving the changes 50
- Save changes this item enables you to save the changes that you have made 50
- Save exit menu 50
- Save options this item enables you to save the options that you have made 50
- This page enables you to exit system setup after saving or without saving the changes 50
- Using bios 50
- Using bios 51
- Updating the bios 52
- Using bios 52
- Auto installing under windows xp 7 8 53
- Chapter 4 using the motherboard software 53
- Running setup 53
- Using the motherboard software 53
- Drivers and software are automatically installed in sequence follow the onscreen instructions confirm commands and allow the computer to restart a few times to complete the installation 54
- Using the motherboard software 54
- Windows 8 will show the following screen after system restart you must select desktop in the bottom left to install the next driver 54
- Manual installation 55
- Using the motherboard software 55
- A system does not power up and the fans are not running 57
- B power is on fans are running but there is no display 57
- C the pc suddenly shuts down while booting up 57
- Chapter 5 trouble shooting 57
- Start up problems during assembly 57
- Trouble shooting 57
- Maintenance and care tips 58
- Start up problems after prolong use 58
- Trouble shooting 58
- Basic troubleshooting flowchart 59
- S e y s e y 59
Похожие устройства
- ECS Elitegroup KBN-I/5200 Руководство пользователя
- ECS Elitegroup H97I-DRONE Руководство пользователя
- ECS Elitegroup Z87H3-A2X EXTREME Руководство пользователя
- ECS Elitegroup Z87H3-A2X GOLDEN Руководство пользователя
- ECS Elitegroup Z87H3-A3X Руководство пользователя
- ECS Elitegroup B85H3-M3 Руководство пользователя
- ECS Elitegroup B85H3-M5 Руководство пользователя
- ECS Elitegroup B85H3-M6 Руководство пользователя
- ECS Elitegroup B85H3-M9 Руководство пользователя
- ECS Elitegroup H87H3-M Руководство пользователя
- ECS Elitegroup H87H3-M3 Руководство пользователя
- ECS Elitegroup H87H3-M4 Руководство пользователя
- ECS Elitegroup Z87H3-A4 Руководство пользователя
- ECS Elitegroup 755FX-A939 Руководство пользователя
- ECS Elitegroup C51G-M2 Руководство пользователя
- ECS Elitegroup KN1 Lite Руководство пользователя
- ECS Elitegroup KN1 SLI Extreme Руководство пользователя
- ECS Elitegroup KV2 Extreme Руководство пользователя
- ECS Elitegroup RD480-A939 Руководство пользователя
- ECS Elitegroup RS480-M Руководство пользователя