Home
Главная
ECS Elitegroup
Материнская Плата
RD480-A939
Руководство пользователя Страница: 51

ECS Elitegroup RD480-A939 [51/92] Using bios

Using BIOS

Load Performance

Load Optimized Defaults

This option opens a dialog box that lets you install optimized defaults for all appropriate

items in the Setup Utility. Press <Y> and then <Enter> to install the defaults. Press <N>

and then <Enter> to not install the defaults. The optimized defaults place demands on

the system that may be greater than the performance level of the components, such as

the CPU and the memory. You can cause fatal errors or instability if you install the

optimized defaults when your hardware does not support them. If you only want to

install setup defaults for a specific option, select and display that option, and then press

<F7>.

Set Supervisor/User Password

When this function is selected, the following message appears at the center of the screen

to assist you in creating a password.

ENTER PASSWORD

Type the password, up to eight characters, and press <Enter>. The password typed now

will clear any previously entered password from CMOS memory. You will be asked to

confirm the password. Type the password again and press <Enter>. You may also press

<Esc> to abort the selection.

To disable password, just press <Enter> when you are prompted to enter password. A

message will confirm the password being disabled. Once the password is disabled, the

system will boot and you can enter BIOS Setup freely.

PASSWORD DISABLED

If you have selected “System” in “Security Option” of “BIOS Features Setup” menu,

you will be prompted for the password every time the system reboots or any time you

try to enter BIOS Setup.

If you have selected “Setup” at “Security Option” from “BIOS Features Setup” menu,

you will be prompted for the password only when you enter BIOS Setup. Supervisor

Password has higher priority than User Password. You can use Supervisor Password when

booting the system or entering BIOS Setup to modify all settings. Also you can use User

Password when booting the system or entering BIOS Setup but can not modify any

setting if Supervisor Password is enabled.

Users please use the factory BIOS default setting of “Load optimized Defaults”

when install Operation System onto your system.

If you select this item and press Enter a dialog box will appear. If you select [OK], and

then Enter, the Setup Utility loads a set of performance default values. These default

settings are quite demanding and your system might not function properly if you are

using slower CPU, memory, or other low-performance components.

Warning: To load Performance settings may make your system become unstable or

unbootable. When loading the Performance Defaults fails, users can choose “either”

step below to return the motherboard to its default BIOS:

1. Reset the system and enter the CMOS setup to reset the CPU frequency.

2. Power on the system and press “Insert” key. The system will bypass the

previous BIOS setting and automatically reload the default BIOS. (This

procedure is BIOS setup only!)

3. Locate the “Clear CMOS” jumper and proceed with the “Clear CMOS” to

recover the default BIOS setting. Please refer to Chapter 2 (page 9) complete the

clear CMOS action. (This procedure requires opening the chasis!)

ECS Elitegroup RD480-A939 [51/92] Using bios

Содержание

Похожие устройства